Thingiverse
![608 Bearing Airsoft 6mm by Verskon](/previews/8690027.jpg)
608 Bearing Airsoft 6mm by Verskon
by Thingiverse
Last crawled date: 3 years, 1 month ago
Yet another 608 bearing to be used with 6 mm Airsoft BBs. I wanted a round model to print instead of the blockier 608 airsoft bearings around.
Made in 5 minutes with Fusion 360. 4 mm center shaft, 6mm vertical bearing bore diameter (which have mostly been cut out), 6.1 mm horizontal bearing bore diameter. .05 mm extra width for each inner and outer bearing bore horizontal diameter.
I pre-selected 7 Airsoft BB's around 5.842 mm diameter for easier spinning. If you want tighter tolerances, choose slightly larger BB's
I tested various sizes and ratios and decided on this tolerance level for low rotation resistance and fairly little freedom of movement. I got the best outer bearing spin times with 6.2mm horizontal bearing diameter (.1 on each bearing for very wide bearing channel) but it was very loose and not needed for my use (filament axle spindles). https://www.thingiverse.com/thing:2229433 is a good option for slightly looser tolerances but better pre-breakin spin time than mine.
Made in 5 minutes with Fusion 360. 4 mm center shaft, 6mm vertical bearing bore diameter (which have mostly been cut out), 6.1 mm horizontal bearing bore diameter. .05 mm extra width for each inner and outer bearing bore horizontal diameter.
I pre-selected 7 Airsoft BB's around 5.842 mm diameter for easier spinning. If you want tighter tolerances, choose slightly larger BB's
I tested various sizes and ratios and decided on this tolerance level for low rotation resistance and fairly little freedom of movement. I got the best outer bearing spin times with 6.2mm horizontal bearing diameter (.1 on each bearing for very wide bearing channel) but it was very loose and not needed for my use (filament axle spindles). https://www.thingiverse.com/thing:2229433 is a good option for slightly looser tolerances but better pre-breakin spin time than mine.
Similar models
thingiverse
free
![airsoft bearing by laughingman](/t/8900874.jpg)
airsoft bearing by laughingman
...er is around 18.5mm. ill post a picture of it someone requests it. added a inner ring for .4 nozzle and outer ring for .4 nozzle.
thingiverse
free
![608 BEARING 6mm BB BEARING M4/8-32 ID by Atomist](/t/8889478.jpg)
608 BEARING 6mm BB BEARING M4/8-32 ID by Atomist
...nning freely.
note - the m4 and 8-32 outer tracks are identical. i just uploaded it under both in order to cut down on confusion.
thingiverse
free
![Parametric Bearing by Tryel](/t/8617789.jpg)
Parametric Bearing by Tryel
...ing using airsoft bb's, the walls would have to be 0.3mm thick, which just isnt viable to print with a standard 0.4mm nozzle.
thingiverse
free
![608 bearing using BBs with source for fidget spinners by jongab](/t/8709941.jpg)
608 bearing using BBs with source for fidget spinners by jongab
...zes which gives it a little bit looser fit and allows it to spin faster.
video here: https://www.youtube.com/watch?v=chigxqrfp_8
thingiverse
free
![More compacct TUSHlike Spoolholder for Printable 6mm BB bearings by KurtKanone](/t/8027602.jpg)
More compacct TUSHlike Spoolholder for Printable 6mm BB bearings by KurtKanone
...://www.myminifactory.com/de/object/3d-print-608-bearing-6mm-airsoft-bb-s-46853
i would suggest a 35-50% infill for the bearings..
thingiverse
free
![608 Bearing Shell and Bearing Cover by tinkernaut_veebz](/t/8725975.jpg)
608 Bearing Shell and Bearing Cover by tinkernaut_veebz
...he ball bearings. i've also included snap in covers for the bearings. it took 11 iterations to find the optimal tolerances.
thingiverse
free
![Parametric split-hub printable bearing by whosawhatsis](/t/9061276.jpg)
Parametric split-hub printable bearing by whosawhatsis
...ith a 3mm shaft, 4.5mm metal bbs with a 6mm shaftt, 4.5mm metal bbs with an 8mm shaft, and 3mm spherical beads with an 8mm shaft.
thingiverse
free
![bearing with airsoft bbs by sk3lett](/t/8084920.jpg)
bearing with airsoft bbs by sk3lett
...aring
-bearing normal: some play so that it spinns freely without friction
-bearing loose: much play
https://youtu.be/k39ey9meipa
thingiverse
free
![Airsoft BBs Bearing by Lamune](/t/8842246.jpg)
Airsoft BBs Bearing by Lamune
...airsoft bbs bearing by lamune
thingiverse
use 6mm airsoft bbs.
diameter,
outside: 50mm(flange), 48mm(center trac)
inside: 20mm
thingiverse
free
![636 Bearing (6mm AirSoft BB's) by SiberK](/t/8673877.jpg)
636 Bearing (6mm AirSoft BB's) by SiberK
...'s) by siberk
thingiverse
636 bearing from 6mm airsoft bb's.
size: 6mm x 22mm x 7mm.
video: https://youtu.be/k4wnknrksfo
Verskon
thingiverse
free
![M3_Push_Pin by Verskon](/t/8677369.jpg)
M3_Push_Pin by Verskon
...r m3 hole where friction fit can keep everything together. printed in abs. snap or cut off tabs. superglue into hole if paranoid.
thingiverse
free
![Pokemon EEVEE Vaporeon Coin Token by Verskon](/t/8689985.jpg)
Pokemon EEVEE Vaporeon Coin Token by Verskon
...urs, the pokemon tokens all went first. besides, there's tons of evolution for theming year to year.
gotta collect them all!
thingiverse
free
![Adopt A Landwhale - Ugly Americans by Verskon](/t/8689728.jpg)
Adopt A Landwhale - Ugly Americans by Verskon
...for more stability.
i cut off the rear feet to add flippers to the ankles. a small studded leather harness was used for contrast.
thingiverse
free
![608 Bearing BB by Verskon](/t/8686183.jpg)
608 Bearing BB by Verskon
... 608_bearing_bb_3.90_2.3_2.25 and the various iteration parts so you can mix and match so long as the raceway offset is the same.
thingiverse
free
![Filament Spool Hub For 608 Bearings by Verskon](/t/8686153.jpg)
Filament Spool Hub For 608 Bearings by Verskon
...418959), printed washers and rod clips.
design inspired by https://www.thingiverse.com/thing:2135132. easy to make in fusion 360.
thingiverse
free
![Anchor Hook Tie down for M3 - M12 Threaded Rod or Prusa I3 frame by Verskon](/t/8681244.jpg)
Anchor Hook Tie down for M3 - M12 Threaded Rod or Prusa I3 frame by Verskon
...e for screw or bolt is offset for ease of nut application and torquing.
i left v1 in case someone needs really close tolerances.
thingiverse
free
![Hiigaran Battlecruiser - Maximum Battleship Homeworld 2 by Verskon](/t/8727420.jpg)
Hiigaran Battlecruiser - Maximum Battleship Homeworld 2 by Verskon
...del stand, turret mounting mechanism for turret rotation, fix eye of horus symbol for printing, design articulated barrel turrets
thingiverse
free
![Turntable for Airbrush, Painting, Modeling Photos Rotating, 608 or BB bearing by Verskon](/t/8675170.jpg)
Turntable for Airbrush, Painting, Modeling Photos Rotating, 608 or BB bearing by Verskon
...thing:2111631, redesign for threaded section connecting, improve top 608 bearing stability (wide base structure/ roller wheels/ )
thingiverse
free
![Prusa I3 MK2 M8 Brace (rear) Independent by Verskon](/t/8681192.jpg)
Prusa I3 MK2 M8 Brace (rear) Independent by Verskon
...the paver for better vibration transmission isolation. overall leveling achieved with cardboard scraps under anti-vibration pads.
Airsoft
turbosquid
$25
![Mask Airsoft](/t/13415348.jpg)
Mask Airsoft
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$2
![Airsoft Tomahawk](/t/13273855.jpg)
Airsoft Tomahawk
...irsoft tomahawk for download as 3ds, obj, fbx, blend, and stl on turbosquid: 3d models for games, architecture, videos. (1145041)
turbosquid
$4
![Extension Barrel for Airsoft Gun](/t/13278425.jpg)
Extension Barrel for Airsoft Gun
...model extension barrel for download as max, obj, fbx, and stl on turbosquid: 3d models for games, architecture, videos. (1239268)
3d_export
$30
![Gunsights](/t/11371150.jpg)
Gunsights
...trijicon rmr type, trijicon bac acog 4x32, aim m2 airsoft x2, vortex optics spr 1303 spitfire all models polygons...
thingiverse
free
![AIRSOFT by Mr_akil](/t/8684888.jpg)
AIRSOFT by Mr_akil
...airsoft by mr_akil
thingiverse
airsoft
thingiverse
free
![Flashhider Airsoft](/t/4869919.jpg)
Flashhider Airsoft
...flashhider airsoft
thingiverse
airsoft m4 flashhider
mounted @ my ares amoeba 008
thingiverse
free
![Airsoft Suppressor by KevinIhle](/t/8051379.jpg)
Airsoft Suppressor by KevinIhle
...airsoft suppressor by kevinihle
thingiverse
airsoft suppressor
thingiverse
free
![airsoft suppressor by jordan250](/t/8738433.jpg)
airsoft suppressor by jordan250
...airsoft suppressor by jordan250
thingiverse
airsoft suppressor
thingiverse
free
![Airsoft Silencer by UKnights](/t/8938211.jpg)
Airsoft Silencer by UKnights
...airsoft silencer by uknights
thingiverse
airsoft silencer
thingiverse
free
![Airsoft suppresor by 3dpoplauki](/t/8698521.jpg)
Airsoft suppresor by 3dpoplauki
...airsoft suppresor by 3dpoplauki
thingiverse
airsoft suppresor rings
608
3d_export
$7
![mb 608](/t/11489458.jpg)
mb 608
...t;br>can be used wherever you want, games, commercials, billboards, everything.<br>blender<br>fbx<br>obj stl
3d_export
$60
![Architecture 608 3D Model](/t/124722.jpg)
Architecture 608 3D Model
...lege campus max street landscape commercial building medical hospital offices
architecture 608 3d model lotusmodel 48741 3dexport
3d_export
$160
![3d building 608 3D Model](/t/135781.jpg)
3d building 608 3D Model
...metropolis street block detailed definition realistic skyscraper huge collection
3d building 608 3d model kanhtart 44669 3dexport
turbosquid
$20
![Bowers & Wilkins ASW 608 Black](/t/13455674.jpg)
Bowers & Wilkins ASW 608 Black
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_export
$50
![3D Home 608 3D Model](/t/139569.jpg)
3D Home 608 3D Model
... chair furniture texture table lamp apartment rug carpet restaurant hotel sitting
3d home 608 3d model richard3015 46671 3dexport
turbosquid
$8
![(608) Decor Element -3d STL model for CNC](/t/13416043.jpg)
(608) Decor Element -3d STL model for CNC
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_export
$14
![ficus tree in pots for the interior 608](/t/11919887.jpg)
ficus tree in pots for the interior 608
...njamina<br>howea forsteriana<br>date palm<br>banana palm<br>ravenala madagascariensis<br>strelitzia
3ddd
$1
![Пуф](/t/657252.jpg)
Пуф
...пуф 3ddd пуф polys: 64 608 размеры: l-500 w- 500 h- 500 quads...
cg_studio
$100
![3d building 6083d model](/t/644969.jpg)
3d building 6083d model
... building 6083d model
cgstudio
.max - 3d building 608 3d model, royalty free license available, instant download after purchase.
3d_export
$50
![Jaguar XJR 14 lemans 3D Model](/t/186650.jpg)
Jaguar XJR 14 lemans 3D Model
...xj 14 jaguar xjr 14 lemans 3d model tyio 608 ...
6Mm
turbosquid
$7
![ring with 6mm diamond](/t/13246639.jpg)
ring with 6mm diamond
...yalty free 3d model ring with 6mm diamond for download as stl on turbosquid: 3d models for games, architecture, videos. (1677598)
turbosquid
$18
![surub 6mm.3DS](/t/13244677.jpg)
surub 6mm.3DS
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$5
![Drill Bit Set 6mm to 20mm](/t/13306155.jpg)
Drill Bit Set 6mm to 20mm
...ill bit set 6mm to 20mm for download as stl, sldpr, and sldas on turbosquid: 3d models for games, architecture, videos. (1257104)
turbosquid
$1
![Flexible Shaft Coupling 6mm x 8mm](/t/13290845.jpg)
Flexible Shaft Coupling 6mm x 8mm
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_export
free
![Download free BULLET REMOVER AND CASE FOR 6mm BULLETS 3D Model](/t/301406.jpg)
Download free BULLET REMOVER AND CASE FOR 6mm BULLETS 3D Model
...un pistol firearm reprringer accessories printable 3d print
bullet remover and case for 6mm bullets 3d model freed 73130 3dexport
3d_export
$5
![Spanner 6mm-32mm 10mm spanner vs nomber](/t/11385009.jpg)
Spanner 6mm-32mm 10mm spanner vs nomber
... vs nomber
3dexport
spanner 3ds max 2021 model with textures all models, formats, textures, converted formats in 1 rar. archive.
3ddd
free
![Trolley Art Deco](/t/611290.jpg)
Trolley Art Deco
...deco 3ddd kare , сервировочный material: никелированное железо, стекло 6mm size: 0,81 x 0,75 x 0,44 m weight: 21,9...
3d_export
free
![ender 3 3d print bed clips](/t/11930065.jpg)
ender 3 3d print bed clips
...aluminium bed frame of the creality ender 3 = 6mm (b) these clips are designed for glass plate +...
3ddd
$1
![BY LASSEN kubus bowl](/t/932716.jpg)
BY LASSEN kubus bowl
...14x14 cm / 23x23 cm, metal frame profile width: 6mm colour: black / white material: laquered steel cleaning: not...
3ddd
$1
![Loop collection](/t/612700.jpg)
Loop collection
...loop collection 3ddd neocraft , loop the loop table’s 6mmthick edge corresponds perfectly with its 5mm-thick powder-coated aluminium frame....
Bearing
3d_export
$6
![Bear](/t/12309613.jpg)
Bear
...bear
3dexport
bear
3d_export
$5
![bearing](/t/11892592.jpg)
bearing
...bearing
3dexport
bearing
3d_export
$12
![bear](/t/11916446.jpg)
bear
...bear
3dexport
bear for 3d printing toy
3d_ocean
$9
![Bearing](/t/369547.jpg)
Bearing
...ne ball ballbea bearing bearings engine hard industrial machine mechanic metal part piece plastic ring screw sphere steel
bearing
archibase_planet
free
![Bear](/t/949893.jpg)
Bear
...bear
archibase planet
statuette bear picturesque element
bear - 3d model (*.gsm+*.3ds) for interior 3d visualization.
3d_export
$5
![bear](/t/11490997.jpg)
bear
...bear
3dexport
bear have a stl.,3dm files
archibase_planet
free
![Bear](/t/947395.jpg)
Bear
...bear
archibase planet
bear animals omnivorous animal
bear angry n250907- 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
![Bear](/t/947396.jpg)
Bear
...bear
archibase planet
bear animals omnivorous animal
bear easy n250907 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
3ddd
$1
![Teddy bear](/t/658896.jpg)
Teddy bear
...teddy bear
3ddd
teddy bear , медведь
teddy bear :)
3d_ocean
$12
![Bear](/t/579824.jpg)
Bear
... formats. created with 3d max 9.0. this file is very useful for learning & rigging. it can be used for any professional work.