1" tubing LED flasher mount for ATV/Snowblower/Boat by henryhbk

Last crawled date: 3 years, 3 months ago

So I needed to mount a pair of ATV LED Flashers (orange/white) to my snowblower (long story) and in doing so realized that I needed some sort of mount for the lights. The frame of the Toro snowblower is 1" (25mm) steel tubing, and while I could have drilled the tubing I figured that would be a site for corrosion, so a surface mount was a better idea. I decided a heavy-duty wire tie would be more than sufficient to hold these blinkers (they barely weight anything). I ended up using M4 short stubby hex-head bolts (because I had them) so the holes are M4 tap size (you need to tap them). I printed these in PLA, since they don't need to take any stress (I mean seriously it's a LED light, not the landing gear for a 747). Anyway I included the STEP file in case you want to make your own variant (like your tubing is slightly larger than 1", or whatever)
I used 5 perimeters and 7 top/bottom layers.
here are the flashers (they are super bright BTW)https://www.amazon.com/gp/product/B07JM7BS45/ref=ppx_yo_dt_b_asin_title_o07_s00?ie=UTF8&psc=1