thingiverse

free

Vise drill adapter by cope413

...e vise. this chucks up in a drill and lets you open and close with ease and speed. i printed in nylon, 3 perimeters, 50% infill.

thingiverse

free

Vise pad by glsf91

...ong powerful small round rare earth neodymium disc magnets 10 x 2 mm 10x2mm" from aliexpress. print the other one in mirror.

thingiverse

free

Ski tuning vise by haighd

...ski tuning vise by haighd thingiverse ski tuning (i.e. waxing and/or sharpening vise). accepts 5/16" nuts and bolts.

thingiverse

free

Wilton Shop Vise Jaws by NCHippy

...//www.tinkercad.com/things/lntzxurezsb-6-inch-wilton-shop-vice-jaws be sure to check out my video at https://youtu.be/56osfbs-d_e

thingiverse

free

bench vise jaw plates by teil3

...bench vise jaw plates by teil3 thingiverse abs jaw plate replacement for a bench vise

thingiverse

free

Vise cover to avoid injury by PXD

...vise cover to avoid injury by pxd thingiverse avoid injury caused by the sharp edge of vise.

thingiverse

free

Awesome printable Vise by zockerbender

...ou print the screws you probably have to cut the threads again. i made this model out of a metal vise which i made by myself too.

thingiverse

free

Ultimate PCB and IC Vise – Version 4 - Printable Vise for Small Electronics by GeoffreyG

...them. also, there are some important items to consider when building this vise, so be sure to see the notes i’ve provided below.

thingiverse

free

ar vise block small by silkfpv

...ar vise block small by silkfpv thingiverse ar vise block made to fit monoprice mini

thingiverse

free

Vise by wilsonfleite

...vise by wilsonfleite thingiverse screw - i recommend use infill 100% other pieces 40% it's ok

thingiverse

free

Vise Level by Covercover88

...sier for me to level things in the vise, if i wanted the object higher up. after the object is clamped down, they can be removed.

thingiverse

free

PCB Vise with Clamp

...73030 in this remix there are only the body of the clamp and the base with the ball. take the remaining parts from the originals.

thingiverse

free

Soft jaw for machine vise by NovaProject

...soft jaw for machine vise by novaproject thingiverse basic soft jaw that will fit a kurt machinist vise jaw.

thingiverse

free

Ski Vise for ski man by marcops

...ski vise for ski man by marcops thingiverse fix on the table, by two bites, by the hole on vise (under cup)

thingiverse

free

Soft vise jaws TPU 75mm by GrugMinis

...soft vise jaws tpu 75mm by grugminis thingiverse for a small vise 75mm

thingiverse

free

CNC VISE HEX GUARD / LOCK by pigracer77

... is in vise. prevents operator from accidentally loosening vise. after print, finish drill with #7, then cutting tap 1/4"-20

thingiverse

free

Ski Vise

... https://www.thingiverse.com/thing:1268369 but it`s drawn from scratch and nothing will work from this design on the design over.

thingiverse

free

Toolmaker's Vise by jsteuben

...cket-head cap screw, as well as a matching washer and hex nut, are required in addition to one copy of each of the printed parts.

thingiverse

free

LR 308 Vise Block by rmonty

...lr 308 vise block by rmonty thingiverse vise block for guntec dpms 308 low profile upper receiver.

thingiverse

free

Sacrificial vise covers for Carbide3d Nomad Vise by hghowe

... getting too close! the covers are a tight fit, to prevent sliding. made with cheetah3d, so that's what the .jas file is.

sketchfab

$6

old Vise PBR

... game model for any engines :) - the dimensions correspond to the real scale - old vise pbr - buy royalty free 3d model by omg3d

thingiverse

free

machine vise (Maschinenschraubstock) by smartie250968

...machine vise (maschinenschraubstock) by smartie250968 thingiverse soon!!!

thingiverse

free

Pin Vise Holder by Olyrick

...holder by olyrick thingiverse i bought a pin vise and need a place to store it so i made this.will also sell printed copys pm me

thingiverse

free

PCB Vise by ModelStation

... so that it will print on a tom and will hold circuit boards in such a way that you have better access to the edges of the board.

thingiverse

free

Flat Vise by dsmith1960

...hin parts, or whatever you might need. this flat vise is similar to a tool called the crab parts holder sold by micro-mark tools.

thingiverse

free

Schraubstock / Vise by PhysUdo

...alter with two clamps and then close the vise so that there is a slight tension on the u10mutter so it gets pushed into its slot.

thingiverse

free

Simple Rubber Band PCB Vise by wd5gnr

...simple rubber band pcb vise by wd5gnr thingiverse a rubber band powered pcb vise.

thingiverse

free

Soft Jaw for 4" vise by LenKessler

...ot; wide. the parts fit but in the future i will increase the counter-bored hole spread by 0.010" to allow for pla shrinkage

thingiverse

free

Drill vise from IDtools

...e from id tools. the f3d file is included and features a functional slide jaw. you can use it for cam in f360. not for priniting.

thingiverse

free

Vise Jaws 125mm by Mike242

...op surface has a lot of holes, etc. only two top layers are a bit to less. but just for squeezing things in my vise, it's ok.

thingiverse

free

4" Vise Jaw Caps by 512Designs

...will most likely need to remix this to fit your vise if it is different. the magnets you need are 10mm in diameter and 2mm thick.

thingiverse

free

Kurt vise dust cap by carbidecannibal

... cavity in the back of my kurt vises, upgrading the original dust cap that comes with the vise as they tend to fall out with use.

thingiverse

free

Soft Vise Jaws by teesider61

...aws for bench vise with 68cm or 3 inch jaws made with flex filament. i printed this at 245 degrees with a bed temp of 50 degrees

thingiverse

free

Pin Vise and Collet Storage Case by bneedhamia

...ains a spreadsheet where you can enter the measurements of a different pin vise set and produce a new case for that pin vise set.

thingiverse

free

"the Vise" (mini edition) by PRIma

...w includes some support already therefore use 0.2mm layer/nozzle 0.4/shell thickness 0.8 washer/nut/knob printed with 0.1mm layer

thingiverse

free

Vise Speed Handle by BLSC_Designs

...i liked it so much that i deiced to share it so here it is. this is designed to fit 3/4" kurt and other machine vise brands.

thingiverse

free

Machinist Vise Mod by JohnSL

...; machinist vise to keep the locking rod from rotating. you can find more information about it here: https://youtu.be/rjk8w6zyc0y

thingiverse

free

Vise Jaw Cover by pitracer

...overs for a starrett vise the jaws are 4in long and 1.25 tall i printed them out of "soft pla" they seem to work well..

thingiverse

free

vise by havefun199902

....com/watch?v=y_dmxsseihc https://www.youtube.com/watch?v=gyctothcils all assembly parts:https://www.thingiverse.com/thing:4558592

thingiverse

free

Desk Vise

...luded the files for a replaceable grooved block and a blank block. i printed mine with pla at 30% infill and 1.6mm wall thickness

thingiverse

free

Third hand PCB vise by Geir

...on. it’s not the sturdiest of vises due to the third hand base, but good enough for my work. i might make a full vise later on.

thingiverse

free

Kurt Vise drill adapter by pitracer

...lly nice when changing jaws! it's designed to press an m6 bolt in for the axle. enjoy! let me know if you use it and love it.

thingiverse

free

Printable Vise Clamp by cgongora69

...this is a 3 parts vise clamp fully printable. needs a 1/4" x 3" screw with nut. i printed it in my afinia with abs .2mm

thingiverse

free

Harbor Freight vise by jmatonis

... longer so the tool will sit better. i am sure more work can be done to improve this. please feel free to make any modifications.

thingiverse

free

pollin vise improvement part by megic

...sy fix to this. just print this part and attach it to the bottom of the moveable part - and tadaa... this vise is really good ;-)

thingiverse

free

Vise Jaws for Bernstein Spannfix 9-205 by VolkerRachooo

...5 by volkerrachooo thingiverse vise jaws for bernstein spannfix 9-205 vise spannbacken für bernstein spannfix 9-205 schraubstock

thingiverse

free

Brad's Bench Vise by bradjshannon

...nd and platform. but the vise is removable from that hole, so other useful things could be swapped in. assembly pics coming soon.

thingiverse

free

fly tying vise

...o break when you tying. it is very simple and easy to assemble the parts. you can check it from the picture that i have uploaded.

thingiverse

free

3 1/2in Vise Soft Jaws

...3 1/2in vise soft jaws thingiverse soft jaws for a 3 1/2in vise. model made in inventor.

thingiverse

free

Breadboard Spring Vise for Raspberry Pi by jakealbert

...bert thingiverse an addition for the breadboard spring vise, this is for the raspberry pihttp://www.thingiverse.com/thing:957376

thingiverse

free

*micro vise by imaicom

...*micro vise by imaicom thingiverse you will need one m3+25mm screw and one m3 nut for assembly.

thingiverse

free

sable2015 pcb vise by TK_DESIGN

...15 pcb vise by tk_design thingiverse sable2015 pcb vise prepare lm8uu x 2 8mm shaft l=195mm m5 screw x 4 m3 screw x 6 m3 nut x 6

thingiverse

free

Sherline Low Profile Vise by ptomli

...rofile vise for sherline milling machines. i created this to be able to hold aluminium plate, to build a metal version of itself.

thingiverse

free

Vise with 7 different switchable jaws by StevePolaczyk

...able jaws by stevepolaczyk thingiverse universal rotating vise with 7 different switchable jaws for modelers and radio amateurs.

thingiverse

free

Dremel CNC Vise by biorobot

...se for dremel cnc -- https://www.thingiverse.com/thing:3004773 1 m8 screw 1 m8 nut 1 m8 spacer 4 m3 screws (tube fix) 1 tube 12x1

thingiverse

free

Wilton Vise Jaw Cover

...originally. resized to fit my wilton 4 5/8" (124mm) vise. covers slide onto jaws and have enough friction to stay in place.

thingiverse

free

Rubber Band PCB Vise by jasoncoon

...al slot to help hold the pcb at an angle. these parts are compatible with the original, so you can use my jaw with the originals.

thingiverse

free

Vise Speed Handle 15mm by rynkidink

...that had a 15mm hex for this vise so i printed one with nylon. works great! plenty strong for everything we have done since then.

thingiverse

free

Card Vise - Yu-Gi-Oh sized by Garantiefall

...se a simple card vise to keep your cards straight! perfect fit for sleeved cards. the image shows approx. 60 cards in the vise.

thingiverse

free

Vise nut by ColdCoffee_

...ldcoffee_ thingiverse the original part was split in to pieces this is just reset designed as one part, and the nut was resized.

thingiverse

free

Bench vise jaw pads covers by Plastic_Innovations

...ted in flexible pla. fits an older milwaukee bench vise model 550, with 3.5" diameter jaws. quick print, under an hour each.

thingiverse

free

PCB VISE MINI-SIZE by komadojiro

...width 22mm shrink shrink process was performed on 123design from stl. shorten jaw was bad idea, so it should use as original one.

thingiverse

free

mini vise or clamp by dalosso34

... of 60.8 millimeter or 2.40 inches. it works pretty well bet i had to put some oil on the thread to make it spin a little easier

thingiverse

free

Soft Vise Jaw Holder by corwellcustoms

...soft vise jaw holder by corwellcustoms thingiverse corwellcustoms

thingiverse

free

3-1/2 inch Vise Jaws by ebredder

...bench vise. one has filleted edges, other is straight. using different infill patterns makes for different hardness of vise jaws.

thingiverse

free

Soft Jaws for 6" Vise by robwand

...rse soft jaws for a 6" vise. holes on back are locations to epoxy in magnets. parts were printed with 3 shell, 80% infill.

thingiverse

free

PCB Vise GoPro Mount by cperiod

...i already have a ball mount and gopro components are nice and modular anyways, so i whipped up a quick adapter for the vise body.

thingiverse

free

Baby Bullet Vise Model by kencaid

...the wilton baby bullet vise. the size is 2" across the jaws. examples of the original can be viewed at: http://goo.gl/ylvui5

thingiverse

free

Vise Press Brake Tools

...x16mm (length x height x depth). each tool has 6 pockets for 10x2mm disc magnets. use at least 4mm wall thickness and 70% infill.

thingiverse

free

Best Vise by turbosupraman

... hex nuts for each. you do have to print two slides and two claws. four different claw designs included more will be added later.

thingiverse

free

Cross Slide Vise Handle - Custom by ebredder

... pittsburgh 6" vise metal pin was made on metal lathe, but could easily be a dowel, 3d printed piece, or ground down bolt...

thingiverse

free

Dremel Stand Heavy for Vise by holydeltawings

...t that it has to be mounted somehow. i removed the sides and extended the base so that it can be locked into a vise for easy use.

thingiverse

free

Charles Parker Vise (not tested) by drarhiii

...for looking/printing...if you're brave. or just saying hey!___(fill in the blank) i saw this 120 year old digital vise today.

thingiverse

free

Printable Bed Vise by Strider460

...e; i use solidworks though so these are just the most universal file types i know of (besides stl of course). pictures to come.

thingiverse

free

Magnetic Vise Jaw (blank&bevel) by Hustensaft

...fect to 125mm vise bar. you will need 5 x 10mm neodym magnets (2mm thick) to glue in. i used pteg with 30% infill at 0.2mm layer.

thingiverse

free

Coin Vise V2 by mgomespt

...ally with cleaning tools such as andre's crayons. it requires 2x m6 bolts of minimum of 70mm length and matching m6 wing nuts

thingiverse

free

Clamping jaw for vise - Klemmbacke für Schraubstock by MaxKat

...i designed this clamping jaw for vise to avoid damage to soft parts i want to thighten in my vise. hope you enjoy too. good print

thingiverse

free

Fly Fishing Vise Tools Holder

...er. finisher, bobbin, scissors, pliers, needles and other tools in one place you need two m4 screws and nuts to mount on the vice

thingiverse

free

Hand Vise by stevea220

...use them while filing or "dremelling"... my pictures show holding cable for tinning wires or putting contacts on cable.

thingiverse

free

Vise parts remixed by asahiGR

...vise parts remixed by asahigr thingiverse repaired left part and added a 60 degree slot

thingiverse

free

Turn your Dremel Multi-Vise into a PCB Vise - PCB holder pads by eried

...uitable to hold pcbs to work with. this design can hold very thin pcbs from 0.5-0.8 mm, normal ones 1.5 mm to thick ones 2-2.3 mm

thingiverse

free

Fully printable PCB vise by sneakypoo

...base has a few square holes for magnets to keep it steady on your workbench. the vise can hold pcbs with a maximum width of 10cm.

thingiverse

free

Swivelling Vise "Kermie" by Gigi1970

...k, swivel in 22.5 degree increments and hold items up to 1.95" thick. detailed instructions can be found in the thing files.

thingiverse

free

Miter saw clamp vise extension by lucassiglo21

...ingiverse this is a simple extension of the vise to clamp down small things to a miter saw. i'm including a solidworks file.

thingiverse

free

2.5" Emco Vise Soft Jaws by dvanommen

...ided tape under the horizontal lip on top or a bit of super glue or something else to hold them on, if you want to use something.

thingiverse

free

VISE HANDLE BUMPER / THICK O-RING by DIY_GUY

... handle bumper / thick o-ring by diy_guy thingiverse simple vise handle bumper. the pic shown is a 6" wilton for reference.

thingiverse

free

dremel 8200 drill press and vise adapter by tcbilge

...remel 8200 drill press and vise adapter by tcbilge thingiverse drill press adapter & vise adapter for dremel 8200 hand tool.

thingiverse

free

PCB vise by mrphilmo

...oards adjust the arm and jaw lengths. freecad files are supplied with parameters in spreadsheets so you can adjust to your needs.

thingiverse

free

Vise Grip (11SP) swivel pad

...39;s worked, it was a little lose on my model vise grips. made this one - fits rather snug but doesn't rattle once attached.

thingiverse

free

V-channel insert for Non-ICE's PCB vise

...e's pcb vise design but wanted a little more grab on the boards so i designed this insert to work on the original vise parts.

thingiverse

free

Soft Jaws for a four inch bench vise by tomlombardi

...without marring its surface.these soft jaws have a flat face and magnet inserts that help keep them in place on a four inch vise.

thingiverse

free

Parametric Soft Jaws for Machine Vise by cilynx

... perfectly. if you have a different vise, just fill in the jaw and block dimensions in the scad file and cut yourself a new stl.

thingiverse

free

Wen cross slide vise handles. by Kommkat

...slide vises, this should fit any cross side vise that's the same though. so the hf ones and maybe the shop fox one? not sure.

thingiverse

free

Upper Receiver Vise Block

...ll need to clean up 1/4 x 20tpi holes with a tap, or screw before threading all the way in i was wearing slippers in the pictures

thingiverse

free

Coin vise V1 by mgomespt

...printing material, fits smaller printers (i used a small sla printer)...the design is much better than this one :) use it instead

thingiverse

free

4" Mini Vise by OffRoadCowboy

... on the end of the bolt and glue them together. after that dries, glue the washer into place to hold it all together. then enjoy!

thingiverse

free

Carvey CNC Vise by jocolibrary

... vise, plus the thickness of the vise. we are working on a model for that, but several small blocks and shims could achieve this.

thingiverse

free

RECORD 100MM / 4" VISE SOFT JAW by UKCD

...record 100mm / 4" vise soft jaw by ukcd thingiverse a quick soft jaw i made for my record power 100mm vise

thingiverse

free

Larger clamp for breadboard vise by giantpune

...f the vise, right? to make this, you still need to print one of the bases from the original model. this is just a different arm.

thingiverse

free

PCB vise by giamma

...quire two steel rod of 8 mm 4 elastic spring and one rod thread rod of 8m. this vise also compensate a non parallel border of pcb

thingiverse

free

Wise Vise by PACAL93

...any support. you will need 4xm4 nut and 4xm4 din7991 screw for the assembly. it is my first uploaded thing, i hope you like it :)

thingiverse

free

Carbide 3D Flip Jig and Vise Tray

... tool box organizer tray for the carbide 3d flip jig and vise. solidworks 2017 file and step file are included in the zip file.

thingiverse

free

Bench Vise Base Plate by Syrus54

...the size to fit the application. item is not for sale, royalty free. [ do not sell nor re-distribute my work ] you're welcome

thingiverse

free

Pen Blank Jig for Drill Press Vise by oz1051

...ted in tpu which worked extremely well for this purpose. make sure you print the left and right instead of using 2x of one side.

thingiverse

free

Small Vise with a hinge by Sr_Dibujo

... to rotate. making easier the proccess. you also will need: 2x m8 nut 1x m3.5 nut 1x m3.5 screw 1x m8 threaded bar (about 120 mm)

thingiverse

free

Small Vise by kb3lnn

...design spark mechanical. http://www.rs-online.com/designspark/electronics/eng/page/mechanical have a great day! :-) robert kb3lnn

thingiverse

free

Small Vise by kb3lnn

...design spark mechanical. http://www.rs-online.com/designspark/electronics/eng/page/mechanical have a great day! :-) robert kb3lnn

thingiverse

free

Soft jaws for 4" milling vise by badiozam

...ws for 4"/100mm kurt-style milling vise like this one: http://littlemachineshop.com/products/product_view.php?productid=1755

thingiverse

free

Hand held mini vise (not tested!) by Kardis

...for fun, not tested yet! the spring is for reference only. you can customize it here:https://www.tinkercad.com/things/a3ahpkfc7dm

thingiverse

free

Drill Press Vise Plate by Pop4solar

...pass where the base of the vise is, such as is in the middle of the vise, but you are limited to depth on the larger hole holder.

thingiverse

free

30.9mm vise soft jaws for clamping seatpost by aaron3d

...e. accepts 1/8" diameter 1/16" thick magnets for easier attachment to vise jaws. includes loops for hanging on pegboard

thingiverse

free

Zyliss Jaws (Vunder Vise, Grip Master, Z-Vise, SwissRex) by LessPaul

...liss clones and licensees such as grip master, vunder vise, z-vise, oz vice, extra pair of hands, mr. strong, bosch spv-200 etc.

thingiverse

free

Drone Vise - Workbench by Basti13

... to present your quad on your desk ;) all you need are the two printed parts and a rubber band (and 4 silicone feet if you like).

thingiverse

free

Breadboard Spring Vise base for SYB-120 by bargyle

... syb-120 by bargyle thingiverse a remix of the breadboard spring vise base to fit an "syb-120" breadboard (46mm wide).

thingiverse

free

Leather vise by masawee

...nted pieces and some m8 mm bolt and nuts. side wood can make how long you need. first proto vise has photo how made whit plywood.

thingiverse

free

Vise for Escornabot PCB mounting by maynej

...also others pcb boards. the screw is m3 x 12mm. thanks a lot a first desing of this vise, is small, usefull for a lot of things.

thingiverse

free

Vise for Holding a PCB (or other lightweight items) by wisar

...en the jaws is 100mm. there are tabs on the jaws to allow the vise to be secured to a table (a little masking tape also works).

thingiverse

free

8" Vise Soft Jaws by bugfixin

...are 200x22x13mm. there are two files -- one for a "flat" jaw and one for notched (for clamping on small curved objects)

thingiverse

free

Adjustable Slip-On Vise Pads by PrintOnAShoestring

...measurements by 1% to account for abs shrinkage. the thickness of the top, bottom, sides, and face are adjustable in millimeters.

thingiverse

free

Watch Vise by Lazybee

...yers for top and bottom and 4 perimeters on the sides you need to print the vise and clamps 1 time, and you need 4 pins to print.