2,204 knurled 3d models found
Download or buy, then render or print from the shops or marketplaces.
3D Models below are suitable not only for printing but also for any
computer graphics like CG, VFX, Animation, or even CAD. You can print these 3d models on
your favorite 3d printer or render them with your preferred render engine.
Please note that the 3D model database is only a Search Engine. You should
visit the original websites. Most of the models can be easily imported and rendered
with Autodesk 3ds Max, Maya, Blender, C4D, and Sketchup. Check for online
3d model conversions tools for your file format.
Shown 2 of
19 pages
thingiverse
free
Knurled Knob for RepRap RAMPS LCD controller by zennmaster
...
this version includes a finger-sized dent for easy spinning.
it will also work with any other device that uses a 6mm d-shaft.
thingiverse
free
Parametric Knurled Nut Knob by drofnas
...
this is my first openscad model, so if you have any tips on making this thing better please leave them in the comments section.
thingiverse
free
Knurled Lighter Sleeve (Updated) by MostExcellentIndustries
...rled lighter sleeve (updated) by mostexcellentindustries
thingiverse
sleeve for common lighters. works great with flex filament.
thingiverse
free
Dl 44 scope mount knurled nut by Chaza64
...4
thingiverse
dl 44 scope mount knurled disc nut, tapped for m6 thread. you will require 4 of these to mount the scope properly.
thingiverse
free
Parametric knurled hex nut holder by Glyn
...parametric knurled hex nut holder by glyn
thingiverse
to hold a hex nut
thingiverse
free
Parametric Hex Knurled Cap by jewzaam
...on what i did to make it for those curious.
note for customizer: it doesn't show the knurling. the final model does have it.
thingiverse
free
Thumb screw for allen screw, knurled nut - Tuerca moleteada by xeski
... allen screw, knurled nut - tuerca moleteada by xeski
thingiverse
thumb screw for allen screw, knurled nut - tuerca moleteada
thingiverse
free
knurled bracelet (parametric) by bbo
...ss can be found here:http://open3dp.me.washington.edu/2014/11/rapid-manufacturing-mk3-detailed-walkthrough-troubleshooting-guide/
thingiverse
free
Fidget Duo-Spinner Knurled by idnarbjm
...idget duo-spinner knurled by idnarbjm
thingiverse
here is a link to caps that will fit.
http://www.thingiverse.com/thing:1848330
thingiverse
free
M2.5-nut knurled attachment by ProduktTester
...nurled attachment by produkttester
thingiverse
designed with thing (https://www.thingiverse.com/thing:2375294) for the m2,5 nuts
thingiverse
free
M3-nut knurled attachment by ProduktTester
... knurled attachment by produkttester
thingiverse
designed with thing (https://www.thingiverse.com/thing:2375294) for the m3 nuts
thingiverse
free
Planet Eclipse Emek Bolt Cap (knurled)
...ern. red bolt guide in picture gallery is a slightly older design, but you get the idea. the black bolt guide is a few mm longer.
thingiverse
free
Simple Knurled Rotary Enocder Knob by marmotjr
...ller than i thought, so the knurls don't show up as well as i had hoped. the "big" file version has bigger knurls.
thingiverse
free
Prusa-style quick dial knob with knurled top by Manzala
...zala
thingiverse
this is a quick dial knob, like the one you see on prusa printers, but with a knurled top for better precision.
thingiverse
free
Knurled Box by JorgTheElder
...cross and 30mm tall.
updates
fixed thread length (i still have not printed it)
smooth versions for those that want to mix-n-match
thingiverse
free
Installation Jig for Knurled SMA Spinner by MoRayCH
...l the knurled sma spinner so that the sma connector sticks out 2.5mm, this is needed to install the antenna on a fatshark goggle.
thingiverse
free
Knurled Knob (Killer) Machine Screw & Threaded by TheSniper
...his is a work in progress. enjoy and pay if forward!
the 15mm is how tall they are overall knurled section is 10mm. boss is 5mm.
thingiverse
free
Knurled Box and Lid with additional housing (for tablets)
...knurled box and lid with additional housing (for tablets)
thingiverse
added separators and additional spacer for tablets.
thingiverse
free
Ergonomic STORM Crayon KNURLED
...se
crayon for people who have difficulty with holding small crayons. a plastic model can be used to form a silicone crayon mold.
thingiverse
free
knurled knob for sma connector by cyclenut
...p enough, so i made it a little bit deeper and tried again. i am happy with the second version called rb_sma_bigger_knurled_knob.
thingiverse
free
Knurl Knobs and high strength pins (23mm and 25mm) by dwnickerson
...ese winders come in two lengths overall lengths (23mm and 25mm).
knurl knobs will house an m3 screw to secure them to the shafts.
thingiverse
free
Knurled Tri-Spinner Penny Shim by MalphasWats
...t this spinner).
shim that allows you to use uk pennies as the weights, rather than 'wasting' a bearing.
i use 3 in each.
3dfindit
free
Rivet nut with round pan head and knurled shank
...rivet nut with round pan head and knurled shank
3dfind.it
catalog: wuerth
3dfindit
free
Rivet nuts with round pan head with knurled shank
...rivet nuts with round pan head with knurled shank
3dfind.it
catalog: wuerth
3dfindit
free
Rivet nuts with round pan head with knurled shank
...rivet nuts with round pan head with knurled shank
3dfind.it
catalog: wuerth
thingiverse
free
Ecrou moleté, knurled nut 6 by micmac2a
...ecrou moleté, knurled nut 6 by micmac2a
thingiverse
ecrou moleté pour vis de 6
thingiverse
free
Knurled Container (Easier Print) by limes92
...limes92
thingiverse
added support for the threads on the inside. previously the first layers of the threads started in thin air.
thingiverse
free
Knurled knob by HansvG
....com/petrzmax. it makes the heated bed more stable and once leveled good it is locked in place. the knobs have an embedded m3 nut
thingiverse
free
Knurled thumbscrew knob (M4) by skrrat
....05 mm layer height (default prusaslicer ultradetail profile) with 0.4 mm nozzle
pics show print with prusament galaxy black petg
thingiverse
free
Knurled Twist Container by rayperkins
.... i am not sure why this is, but i would give it some time and then open and close it multiple times to try to make it fit well.
thingiverse
free
Threaded Filament Dust Filter + Knurl = Replicator 1,2 & 2X by activezombie
...dd a knurl to the male part too, so i added another few files for individual and dual set parts.
sorry these are big stl files.
thingiverse
free
Knurled Bracelet No2 by aubenc
...ib
(* yet another infamous bracelet)
(** and the worse is that i think i'm not yet finish with this... ting-a-day, you know)
thingiverse
free
SMG E-11 Blaster Grip With knurling CORRECT SIZE by MontagueFlange
...blaster grip with knurling correct size by montagueflange thingiverse knurled grip for smg e-11 blaster now with trigger section...
thingiverse
free
Knurled AA battery container with screw on lid. by MichMich
...in a way that the batteries stick out of the bottom part of the container. please use the files for v3 if you want these changes.
thingiverse
free
IKEA door knob replacement knurled / wavy by ciq
...ikea door knob replacement knurled / wavy by ciq
thingiverse
replacement door knob
thingiverse
free
Thumb Screw Knurled Knob by rotf101
...thumb screw knurled knob by rotf101
thingiverse
original wing-nut shaped cap on screw broke, so i made a knob instead.
thingiverse
free
Very Small knurled container
...er
thingiverse
pla any color
no supports
nozzle :205-220
bed :65-70
can be used for small and tiny things
just split & print
thingiverse
free
knurled pen by toregreb
... for remix as asked by macandnews .
updated 10/06/2018 :
added scad file to engrave name or other words like a proverb on the pen
thingiverse
free
M6 Knurling with and without M6 Nut inlay
...usion 360:m6 knurling with nut inlay - regular height m6 nut should fitm6 knurling with washer - you need cut threads with a tool
thingiverse
free
Knurled DynaVap OmniVap XL Container
...anyone is interested in this container and wants to send me the height of their unit, i'll try to get a version that fits it.
thingiverse
free
Customizable Knurled thumbscrew cap for machine screws
...ead a bit as well, to give the glue more to stick to.
uses aubenc knurled finish library: http://www.thingiverse.com/thing:31122
thingiverse
free
Moog Werkstatt toothpaste knob 6mm knurled shaft potentiometer by Kemmer
...verse
i made this for my moog werkstatt but it should work on any 6mm knurled shaft potentiometer.
inspired by a toothpaste cap.
thingiverse
free
Bike handlebar grip (knurled)
...thingiverse :)
27.5mm id, 30mm od
softer materials like tpu tend to work better for applications like this. print flat side down.
thingiverse
free
Knurled Spinner Remix by nmehta
... a couple of my scad default generated outputs was not holding the bearings in tightly.
let me know how this works for you!
thingiverse
free
Knurled Pot by fusionlab_3d
...set (again, i think this is the case - this isn't my day job, i don't have endless time to tweak and test my hypothesis!)
thingiverse
free
Shift knob (no knurling)
... the shifter stick under the shift boot. the shifter knob then screws onto the connector with the boot in between the two pieces.
thingiverse
free
Knurled 1/4-20 Camera Mount Screw by jazzychad
...ed a knurled 1/4-20 camera mount screw? here you go! if you want to customize further, i have included the onshape document link.
thingiverse
free
Axle and Non-Knurled Endcaps for Enhanced Math Spinner by anoved
...r paulo blanks' math spinner. these endcaps have smooth surfaces instead of a knurled texture. (easier for me to print fast.)
thingiverse
free
Knurled Round Spinner by Gazorpa
...single bearing spinner that won't bruise your fingers when you flip it hard.
guaranteed genuine usa brand or your money back.
thingiverse
free
Knurled bed leveling knob Prusa i3 by PeterStegemann
... are higher than most, as the prusa/wanhao has enough room. just pop in a 3mm hex nut and add a washer at the top when mounting.
thingiverse
free
PET Container with knurled grip by lees17
...ippets from
polyscrewthread_r1http://www.thingiverse.com/thing:8796
and
knurledfinishlib_v2http://www.thingiverse.com/thing:31122
thingiverse
free
Storage/Trinket Pot (Knurled & Threaded) by Uberjovial
...be equally at home on the sideboard as it is on your desk.
diameter: 100mm (ca. 90mm internal)
height: 61.8mm (ca. 58mm internal)
thingiverse
free
Knurled Knob for 1/4" bolt/stud by bigblack
...ell so i thought it should be offered by itself as well. it is use to make a knurled knob with a 1/4" bolt/stud epoxied in.
thingiverse
free
CR-10 Z-Axis Adjustment wheel with knurled speed knob by madmodder123
...b by madmodder123
thingiverse
added knurling to knob so you can get a better grip to achieve maximum speeds!
wheel is unchanged.
thingiverse
free
Elliptical Gear with no center pivot (knurled knob remix)
...elliptical gear with no center pivot (knurled knob remix)
thingiverse
glue to each side, back of click into the gear
thingiverse
free
Knurled Ring EDC Fidget Widget by Gertsen
...r (i think i'll make one for myself hehe).
fits regular 608 bearings.
i recommend ceramic ball bearings, they spin very well.
thingiverse
free
Parametric container with threaded lid and optional seal (remix with new knurling and threads) by wrw60543
...4226367). the threads are easier to print and provide more clearance then the original design. the knurling provides better grip.
thingiverse
free
Knurled knob for 6mm shaft (Prusa I3) by nigeljohnson73
...t used on the original prusa i3 range of printers amongst others.
i don't have my printer yet, it's still in the mail :)
thingiverse
free
1/4" Knurled Camera Screw by Waverunner62
...you need a different length, size, mods... feel free to message me
tested in pla and fit perfectly, see picture
best regards
eric
thingiverse
free
Knurled Knob for Ender 3 V2 by breaktech
...s well upside down, shouldn't need support but just in case you can add a small spot in the finger recess with a cura plugin.
thingiverse
free
Ender 3 v2 Knurling LCD Controller Knob by jamiebrindle
...knurling texture. takes less than an hour to print (average - depending on settings).
i made it (remixed it) for colour matching.
thingiverse
free
Original Prusa i3 Mk2 / Mk2S LCD Knurled Knob by MIKEYMCC
...prapdiscount smart controller. this should work on original prusa i3's as the inner dimensions are the same as the original.
thingiverse
free
Knurled Center Knob for Napier Deltic Engine Model by zefram by ryonsherman
...ram's napier deltic engine model inspired by the build by 3gng.
the gear includes a knurled knob to allow for easy operation.
thingiverse
free
Knurled Twist Container (Remix) by MostExcellentIndustries
... as my slicer. fit perfectly on my first try but i haven't tested it on other printers so i'd be interested in feedback.
thingiverse
free
Knurled Vornado Fan Knob by Videblu
...current state the knob will not fit the vornado fan. :(
the knob has been revised to fit properly, however your mileage may vary.
thingiverse
free
Customizable Container with Knurled Lid by wstein
...oviding the code and making it! i like it very much!
see also my new lofty container and epcot spaceship earth style container!
thingiverse
free
Knurled Finish OpenSCAD library v2.1
...oved and deprecated feature use in openscad.
for info see the thing this was derived from
https://www.thingiverse.com/thing:32122
thingiverse
free
M3 Knurled Nut Gripper by robthomson
...e
deisned to use an m3 brass insert
10mm height
5mm width
you will need to push fit the brass insert in with a hot solder iron!
thingiverse
free
Knurled "topper" for stepper motors by teckwee
...er motors by teckwee
thingiverse
i print these so that i can easily adjust my x and y motors. making full use of the free shaft.
thingiverse
free
Knurled Container by DanielDC88
...th. there is a small cone shape at the bottom to keep anything you put in centred. if printed correctly, this should be airtight.
thingiverse
free
Remix knurled twist container
...hole so i made it bigger without making the unit itself bigger.
print this with some pretty dense infill and itll fall with ease
thingiverse
free
Napkin Ring and Knurled Knob Customizer by Edak
... 6mm hole. fits nicely on my reprap discount lcd.
watch a video of it printing here:https://www.youtube.com/watch?v=zhvnjg5n5yg
thingiverse
free
Knurled Lockpick Handle
...cluded pictures, the black handlesare my 0.025 picks, the blue handles are my 0.020 picks, and the white handle is my 0.015 pick.
thingiverse
free
Straight knurled LCD knob for Prusa i3 MK3 by Yesh_Indeed
...er a little more grip compared to the stock.
the fit is a little tight when i put it on the first time but easier on the second.
thingiverse
free
KNRLR - a tool for making knurled bolts which are actually spiky by chopmeister
...esigning.
it's modelled in 3dsmax, so no openscad files, sorry :( if anybody wants to make a parametric version be my guest.
thingiverse
free
TALL KNURLED BOX 50 MM * 80 MM
...tall knurled box 50 mm * 80 mm
thingiverse
pla
infill 10%
nozzle : 210-220
bed : 65-70
thingiverse
free
Knurled Leveling Knob by robosmith
...m ebayhttp://www.ebay.com/itm/10-pcs-m3-x-12mm-brass-hex-standoff-pillar-female-female-ak-cheap-/171504778699?hash=item27ee7b3dcb
3dbaza
$3
Knurl Nesting set of two coffee tables (326061)
...>version: 2013<br>dimension: 1102.41 x 1050.66 x 463.65<br>render: corona<br>formats: 3ds max 2013, obj, fbx
thingiverse
free
Ender 3 V2 Knurling Style Tension Knob Cover by Achocho
...by m_d_k.
a simple tension knob cover for further customize your ender 3 v2, enjoy!
remember to post a make for support! thanks!
thingiverse
free
Set of 3D Printed Knurled Nuts by 3d-print-works
...h easier to manipulate and hand tighten, there is no need for a tool such as a spanner. great for those awkward to reach places.
thingiverse
free
Knurled Knob (M5 & M6) by c_wolsey
...o customise it.
parametric parameter you can change are......
shaft length
knob length
knob girth
wall thickness
thread diameter
thingiverse
free
Ender 3 Knurled Extruder Knob (Parametric Fusion 360) by scaryPug
.... should fit any stepper motor with 5mm shafts
f3d file included for easy remix.
print it with flat side down, no support needed.
thingiverse
free
Trius Foot Thrower Knurled Knob by lkimble
... the trius one step trap clay pigeon thrower. this part is a reinforced replacement for the original, which broke on my thrower.
thingiverse
free
Raendelschraube-Aufsatz-M3-M6-Knurled-Screw by savvylan
... savvylan
thingiverse
rändelschraubenaufsatz.
damit kann man aus jeder zylinderkopfschraube m6 dn912 eine rändelschraube machen.
thingiverse
free
Anet A8 Knurled Bed Adjustment Knob by supersaiyen
...y supersaiyen
thingiverse
scaled down to 17.5mm diameter to prevent collision with the anet frame. remixed from another version.
thingiverse
free
Knurled nice bottle by Waessman
...ll work but it can be trouble for you.
the "sidoögla" can be printed right way and works a lot better with the threads.
thingiverse
free
File Handle With Knurling for 6 Inch File
... according to your need)
the model with the slot is designed for this particular 6" mill bastard cut file from corona tools.
thingiverse
free
CRSF TX Antenna Knurled Nut by PhilPagan
...ing and unscrewing much easier.
i set the antenna vertical when flying my quad, and horizontal when putting the rc into its case.
thingiverse
free
Knurled two way screw by TheRapidPro
...s
┈┈╱▔▔▔▔▔▔▔▔▔▔▔▏
┈╱╭▏╮╭┻┻╮╭┻┻╮╭▏
▕╮╰▏╯┃╭╮┃┃╭╮┃╰▏
▕╯┈▏┈┗┻┻┛┗┻┻┻╮▏
▕╭╮▏╮┈┈┈┈┏━━━╯▏
▕╰╯▏╯╰┳┳┳┳┳┳╯╭▏
▕┈╭▏╭╮┃┗┛┗┛┃┈╰▏
▕┈╰▏╰╯╰━━━━╯┈┈▏
thingiverse
free
1" Diameter Knurled Knob for 1/4x20 nuts and bolts by Frugalshave
...for a tight pressure fit. you will need pliers to insert the nut.
i printed with 3 shells and 20% infill for some extra strength.
thingiverse
free
Knurled thread protector for Ruger 22/45 by LionFox
...t as good as the original, obviously, but it should get you by until you buy a new one.
this should work with any 1/2-28 threads.
thingiverse
free
Knurled Keychain Container by Zizor
...update:
i have added a smaller version of the design as a pill container, it should be able to be printed with the same settings.
thingiverse
free
Repaired Bottle and Screw Cap 30 with Knurled Top by jamesarm97
...y. i repaired this model and now it prints fine.
i also changed the lid and added knurling to it. see the photo for how it looks.
thingiverse
free
BORA Centipede | Knurled P-Cap Insert by pencilneck
...-compatible designs!
recommended print material is abs/asa or petg
donations appreciated! saving to cover the costs of a printer!
thingiverse
free
Socket Sombreros for Knurled Thonkiconn Jack Sockets by LonelyRomanNoise
...ould press on to the knurled nuts of each jack. after a few test prints of the circles i saw their resemblance to sombrero hats!
thingiverse
free
Knurled M6 Knob (for leather strip cutter) by JakeTheMaker
...ally captured nut and bolt in them so the stay at the proper thickness. i also made the measurement lines in 1/4 inch increments.
thingiverse
free
Knurled Thumb Nut for Ender 3, CR-10 HotEnd Fix
...ary for this coupler, i thought i would make a knurled thumb nut for it. it has the same overall diameter as the former hex nut.
thingiverse
free
Extra Long Knurling Bolt and Nuts (150mm Version) by foorschtbar
...olt and nuts (150mm version) by foorschtbar
thingiverse
a long m16 bolt and some nuts. a nice finger toy for long phone calls :)
thingiverse
free
Motorcycle Peg (knurled)
...ill replace a broken pegs.
haven't tried to do a mold and cast with 3d printed parts yet but this was a fun part to recreate.
thingiverse
free
Knurled Thread Protector (Airsoft) by JokerToolWorks
...d protector over time. just figured this would be a good note for people since this is still getting the occasional view/collect.
thingiverse
free
Dnder-3 knob knurling(Pro, CR-10) by jrpsoul
... comment. i will add it after checking.
also, when there is a design you need, i will make it if you request it.
have a nice day.
thingiverse
free
M4 knurled knob thumbscrew by skrrat
...inted settings:
galaxy black prusament petg
0.05 mm layer height (ultradetail default profile prusa slicer)
printed on prusa m3ks
thingiverse
free
Slim M4 Knurled Nylock Bed Leveling Knob for Ender 3 by robertd33
...k nut, 6.94w x 4.94h
matching design with
knurled ender 3 v2 nylock belt tensioner knobhttps://www.thingiverse.com/thing:4770092
thingiverse
free
SMA Connector Knurled Grip- Improved by TopJimmyCooks
...t the ends to keep it in place. also smaller inside to grip tighter. flexible filament recommended. hex opening goes on first.
thingiverse
free
JG Bar 10 Suppressor (Knurled)
..., paint, etc. fits much better. in order to make the threading print properly, you must print this thing with the front end down.
thingiverse
free
V6 holder m3 instead of knurled by Grenwall
...start to spin when overtightened, but it is still rock solid, and works sort of like a mechanism to keep you from overtightening.
thingiverse
free
Runcam Micro Swift Mount for ZMR 250 with knurled 25mm spacers by jangrewe
...e spacers should work fine: https://www.banggood.com/10pcs-m3-25mm-knurled-standoff-aluminum-alloy-anodized-spacer-p-1118407.html
thingiverse
free
Open Hardware Knurled Knob for M6 Nut by AndrewBCN
...ore being embedded in its nut trap in the body of the knob.
openscad sources are included so the design can be further remixed.
thingiverse
free
Knurled Knob with M4 insert nut by PaoloRob
...he m4 nut, i use this for my diy printer on the belt tensioner pulley but it could be used for so many different applications ...
3dbaza
$3
Knurl Nesting Coffee Tables Set of Two (Crate and Barrel) (110451)
...ray, corona, fstorm<br>additional obj and fbx formats<br>number of polygons: 14102<br>number of vertices: 14164
thingiverse
free
30mm Container With Knurled Type Pattern by Rbsmakn
... i decided to print a base for it. i'll include the separate files, as well as the one file that merges them. happy printing.
thingiverse
free
Finger Screw with knurled surface by poulanker
...inish, when pressed into the recess in the finger screw. i made this for a m6x1mm bolt that has a head diameter of approx. 15 mm.
thingiverse
free
Knurled Grippy Cardboard Screw v4 Makedo & Technic Pin Compatible by jendenuvaden
...ke velvet butter on your fingers and increase grip by at least 1000%.
print at 25% & 0.12 layer height for maximum strength.
thingiverse
free
Ender knob knurling(3, 5, Pro, CR-10) by jrpsoul
... comment. i will add it after checking.
also, when there is a design you need, i will make it if you request it.
have a nice day.
thingiverse
free
knurled nuts Z coupler 8 - 5 mm by reddo
...ouplers commercially available !
use the v2.5 5-8mm coupler from the original design https://www.thingiverse.com/download:2463007
thingiverse
free
Wheelbarrow knurled handle grip by emilhallengren
...d to fit a cylinder of 32mm diameter, but you might need to scale it up or down accordingly for a snug fit. no support necessary.
thingiverse
free
Knurled Knob for RepRap RAMPS LCD controller by dasaki
...nd remodeled fixing hole.
if you are a curious maker / "tinker" / hacker, have a look at my blog:
www.therandomlab.com
thingiverse
free
M5 Knurled Knob by shaiss
...rsion of the original so you can tweak as desired. remember that you need the library from http://www.thingiverse.com/thing:9095
thingiverse
free
Fidget Bi-Spinner Knurled 608 Bearing by rawlogic
...to print mine at 100.8% on the x and y for tolerances, otherwise the bearings were too tight. your filament and printer may vary.
thingiverse
free
VTX Antenna mount for ZMR 250 with knurled 25mm spacers by jangrewe
...pter-p-975910.html
spacers: https://www.banggood.com/10pcs-m3-25mm-knurled-standoff-aluminum-alloy-anodized-spacer-p-1118407.html