8,493 Tilt 3d models found
Download or buy, then render or print from the shops or marketplaces.
3D Models below are suitable not only for printing but also for any
computer graphics like CG, VFX, Animation, or even CAD. You can print these 3d models on
your favorite 3d printer or render them with your preferred render engine.
Please note that the 3D model database is only a Search Engine. You should
visit the original websites. Most of the models can be easily imported and rendered
with Autodesk 3ds Max, Maya, Blender, C4D, and Sketchup. Check for online
3d model conversions tools for your file format.
Shown 2 of
71 pages
thingiverse
free
Tilt Maze by andrewtholmes97
... rotation of one axis, and that entire assembly is mounted to another servo on the board, allowing for control of the other axis.
thingiverse
free
DSLR mount for Pan and Tilt Mechanism by mbh16
...rse
this is the last piece to finish off the dslr pan and tilt mechanism. this piece mounts the dslr to the pan and tilt system.
thingiverse
free
Pan tilt head with mg90s by arbuzov
...ead with mg90s by arbuzov
thingiverse
this is a pan tilt mechanism for the raspberry pi camera.
was designed to use mg90s servos
thingiverse
free
Eachine Cam Tilt for FPV by Gardo
...eachine cam tilt for fpv by gardo
thingiverse
tiltable mount for eachine fpv cam.
easy to modify to work as a tilt with a servo.
thingiverse
free
Tilt Adjustale iPhone Stand by sebkeefe
...ebkeefe
thingiverse
a stand for an iphone, either vertically or horizintally placed, that the tilt of the phone can be adjusted.
thingiverse
free
penholder tilted 2 by Minguz
...penholder tilted 2 by minguz
thingiverse
ready to use
thingiverse
free
Tilted Cone for Replicator+ by Toolpath_Team
...tilted cone for replicator+ by toolpath_team
thingiverse
adhesion test
thingiverse
free
Tilted Cone for Z18 by Toolpath_Team
...tilted cone for z18 by toolpath_team
thingiverse
adhesion test
thingiverse
free
Tilted Cone for Mini+ by Toolpath_Team
...tilted cone for mini+ by toolpath_team
thingiverse
adhesion test
thingiverse
free
Delta effector tilt meter by nebbian
...ctor tilt meter by nebbian
thingiverse
this part allows you to see if your effector is tilting as it traverses your bed surface.
thingiverse
free
Lightwaverf Corner PIR Mount Tilted by mark133
...lightwaverf corner pir mount tilted by mark133
thingiverse
lightwaverf corner pir mount tilted
thingiverse
free
GoPro Hero3 Pan/Tilt Rig by MystX
...gopro hero3 pan/tilt rig by mystx
thingiverse
pan/tilt rig for hero3 cameras.
thingiverse
free
Camcorder pan/tilt support v2 by knighster35
...d modified pan/tilt support for a light camcorder.
evolution is pan and tilt modules are made of 3 parts to assemble with screws.
sketchfab
$19
Tilted pane stand 5-tier
...tilted pane stand 5-tier
sketchfab
tilted pane stand 5-tier - buy royalty free 3d model by hq3dmod (@aivisastics)
thingiverse
free
Printrbot Simple No-Tilt Feet by bck
...ot simple no-tilt feet by bck
thingiverse
these feet will stop your simple from tilting.
especially if you upgraded your x-axis.
thingiverse
free
Tilt Table by don3sch
...'s see.
we use this to tilt a gallon jug under the ro water filler spout.
table is pretty strong, easily supports 10 lbs.
sketchfab
$20
Tilt Brush: "America great again?
...s. time will tell… - tilt brush: "america great again? - buy royalty free 3d model by rein bijlsma (@reinbijlsma)
unity_asset_store
$10
Military Army Tilt Truck
... workflow with the military army tilt truck asset from jaysta3d. find this & other land options on the unity asset store.
unity_asset_store
$10
Tilt Top Table - PBR
...ur workflow with the tilt top table - pbr asset from svg3d. find this & other furniture options on the unity asset store.
thingiverse
free
Covered Tilt Maze by andrewtholmes97
... rotation of one axis, and that entire assembly is mounted to another servo on the board, allowing for control of the other axis.
thingiverse
free
JX23 pan &tilt by jinx
...ldhttps://www.youtube.com/watch?v=d7o3uir_pqs
i've done a short write up at http://letsmakerobots.com/content/jx-23-pan-tilt
thingiverse
free
Quad motor tilt mount by Zacke44
...tilt mount by zacke44
thingiverse
10dgr forward tilt
for 28mm mount
use with straight forward mounted motors(see hole alignment)
thingiverse
free
window tilt latch (for aluminum frame) by Draklore___
...window tilt latch (for aluminum frame) by draklore___
thingiverse
replacement tilt latch for older aluminum framed windows
thingiverse
free
Video pan/tilt module v3 by knighster35
...video pan/tilt module v3 by knighster35
thingiverse
the pan/tilt module without the axes and bearings parts.
thingiverse
free
Toilet Lid Tilt Sensor Holder by mikelduke
...or mount for a toilet seat lid, used for making a toilet night light.
the tilt sensor is used to switch a red led attached below.
thingiverse
free
Tilt Table with Motorized Stand by RobotSwarmControl
...s.
video of the large tilt table completing part assembly with the magnetic sliders: https://www.youtube.com/watch?v=sjwy1qdpw2s
3dbaza
$2
Tilt Top Table (341128)
...n use. ideal for compact space or as a convenient spare table that can easily be stored away.<br>dimensions: 740 x 900 (mm)
thingiverse
free
Fatshark Camara Tilt by EB5TC
...ide zmr250.
the servo is tg9e.
i was insipired by:http://www.thingiverse.com/thing:563674http://www.thingiverse.com/thing:1061264
thingiverse
free
Tilted square pattern illusion by janpatter
...ter
thingiverse
3d printable version of "laser cut tilted square pattern" by notwebsafe.
solidworks model is included.
thingiverse
free
Window Mortise Tilt Latch by BC_FJC
...giverse
window mortise tilt latch for double hung windows that swing in for cleaning. original design is weak and keeps braking.
thingiverse
free
Durafly Tundra Pan and Tilt by Chilternflyer
...hingiverse
mk1: still a work in progress.
use sg90 servo for the tilt.
there are two options for the pan servo (sg90 or tgy180).
thingiverse
free
DSLR Pan and Tilt mechanism for Timelapses by mbh16
...an and tilt mechanism for timelapses on dslr. here is an example of what time-lapses you can produce using a pan and tilt system:
thingiverse
free
Tilt sensor by vylbird
...on garden lights, as unlike infrared it isn't set off by the local foxes and cats. requires one metal pendulum and some wire.
thingiverse
free
FPV Camera with tilt by surver
...fpv camera with tilt by surver
thingiverse
replace two front standoffs.
thingiverse
free
Tilt mechanism for VTOL by P4man
...ing on.
fits a hitec hs-225bb might mini servo.
requires a 5mm round shaft and 5x8x2.5 mm bearings as well as 10x10mm square boom
thingiverse
free
Tilting Idler Gear by enhydra
...sembly (rsdoc) are not bevelled!
https://youtu.be/qi0wppae32i
see also http://www.3dgeometrie.com/2015/09/tilting-idler-gear.html
thingiverse
free
skymule pan/ tilt servo holder by Schulle
...skymule pan/ tilt servo holder by schulle
thingiverse
a simple 9g servo holder for fpv pa/tilt for the skymule
thingiverse
free
Pixy Pan/Tilt Mount & Headlight by DaveGun
...pixy pan/tilt mount & headlight by davegun
thingiverse
cmucam5 pixy pan tilt mount with headlight mount.
thingiverse
free
sOAT Impossible Tilt Mount by LitterBug
... pivot mount and not the duct or motor mount. the file is for one side only. a mirrored copy will be needed for the other side.
thingiverse
free
Tilt-o-matic tilt-shift adapter by bhautikj
... pretty straightforward and you should print with as fine a resolution as your printer can manage (worked great for me at 0.1mm).
sketchfab
$11
Stilton mushrooms tilted wig photogrammetry
...hfab
created with polycam - stilton mushrooms tilted wig photogrammetry - buy royalty free 3d model by alex tench (@alex.harvey)
sketchfab
$7
3D breakfast - Tilted wig Warwick
...wick
sketchfab
created with polycam - 3d breakfast - tilted wig warwick - buy royalty free 3d model by alex tench (@alex.harvey)
thingiverse
free
Pan y TILT webcam by Todopic
...ilt webcam by todopic
thingiverse
control inalambrico de una webcam, con pan y tilt, empleando motores paso a paso con reducción
thingiverse
free
Battered Barrels Tilted Buried by onebitpixel
...le tilts, rotations and plane cuts to make these look like they were buried or submerged. these printed without support but ymmv;
thingiverse
free
Tilt WadeExtruder (fixed tool) by natko
...ko
thingiverse
wade stile extruder parts for tilt printer excluding hot end, will fit on a cupcake with abp
all respect to wade
thingiverse
free
Pan & Tilt FPV for Skymule or other by RedStan
...pan & tilt fpv for skymule or other by redstan
thingiverse
here my pan & tilt for durafly skymule fpv
3dbaza
$3
Lampatron tilt Floor lamp (172977)
...lampatron tilt floor lamp (172977)
3dbaza
thingiverse
free
parabola tilted 36degree by einsKomma62
...parabola tilted 36degree by einskomma62
thingiverse
the parabola is printed on a 100x100mm square area
thingiverse
free
tilt/shift macro for konica lens & camera by Laposka
... by laposka
thingiverse
tilt/shift macro for konica lens & camera
print the tilt/shift with support
print it with black pla.
thingiverse
free
Tilting Tablet Stand Remix by oldcyclist
...ingiverse
this is a remix from tilting tablet stand cnc/laser.
i modified to use 2.5mm mdf board and optimized for laser cutter.
thingiverse
free
PM300 Tilted motormounts by notalP
...ame/pm300-quadcopter/
there are two versions, 10 and 15 degrees. 10 degrees will be fast and 15 will be...well, even faster :)
thingiverse
free
Limelight Tilt mount
...em. this locks it in place. be careful, as under high stress, it can crack. fasten the limelight with 4 cable ties.
version 2.0.0
blendswap
free
Tilt/Shift Effect
... that look like miniatures. e.g. take a photo of a city from on top of a hill and the city will look like a little model village!
thingiverse
free
Impossible tilt - BabyTri edition by Motorpixiegimbals
...nter the servo and calibrate 40 degrees to either side.
https://rcexplorer.se/product/babytricopter-kit-with-f3fc-racing-and-pdb/
thingiverse
free
Pan and Tilt for Foxeer Box action cam. by Noircogi
...
thingiverse
simple pan and tilt mechanism for the foxeer box action camera. use a 9 gram servo for tilt and a gws 125 for pan.
thingiverse
free
Business card hoider, tilted by Feanim
...e
the rounded business card holder from pyromaniac, slightly more tilted back so that the cards lean more against the back wall.
thingiverse
free
Camera Tilt Mount with servo by evans036
...is designed for standard board camera with 28 mm hole spacing. the tilt is servo controlled.
servo is a standard 9g micro server
thingiverse
free
Camera mount with servo tilt by evans036
... is designed for standard board camera with 28 mm hole spacing. the tilt is servo controlled.
servo is a standard 9g micro server
thingiverse
free
SuperSimple Pan and Tilt FPV by Guizmo12
... from the pan/tilt of fatshark. perfect for hextronic 9g servos
probably need some modification. like the hole for control horn
thingiverse
free
Compact Pan Tilt Mount by machadolab
...for a design where the pan servo is already recessed. utilizes a 3x8x4 bearing, m3x12 hex head, and 2 m3 nuts for smooth tilting.
thingiverse
free
Full tilt logo by johnbo1211
...full tilt logo by johnbo1211
thingiverse
this is for all of the skiers out there, should print perfectly
thingiverse
free
Ergodox EZ Extended Tilt Kit Leg by nnifinn
...m your existing ergodox ez tilt kit on the replacement legs.
https://ergodox-ez.com/https://ergodox-ez.com/products/tilt-tent-kit
thingiverse
free
CMOS mount with 15* tilt by nightislight
...cmos mount with 15* tilt by nightislight
thingiverse
this is for fpv .
thingiverse
free
DJI Tilt control by jlark
...d. i found that the existing 3d printed control were breaking both for pla and abs so used this to modify it. works like a charm.
thingiverse
free
Mobius Mount 20 degree tilt by nicolasgod
...nt 20 degree tilt by nicolasgod
thingiverse
mobius mount with 20 degree tilt angle, a short version available if you prefer it.
thingiverse
free
RD290 landing gear set for tilted takeoff by liftbag
...at helps when you use tilted motors.
you can find a suitable tilted motor mount set here: http://www.thingiverse.com/thing:986272
thingiverse
free
effector tilt meter, bigger by Bjoern85
...ingiverse
made the effector tilt meter a bit larger, where you clamp it. its now 40mm wide.
thank you for this very useful tool!
thingiverse
free
A small pan and tilt mechanism by Altoidian
...an device made from five separate parts. the table is only 34mm square. it is adaptable for making it remote control with servos.
thingiverse
free
Raspberry PI Pan/Tilt Cam by flodejr
...i cam and pi noir) is from
super ultra compact pan/tilt camera mount - v2 by zalophus (https://www.thingiverse.com/thing:1799905)
thingiverse
free
Tilt out latch for double hung windows by mightyquinn
...tilt out latch for double hung windows by mightyquinn
thingiverse
tilt out latch for double hung windows
thingiverse
free
SF11 Lidar Bracket with 5 Degrees Tilt by rorypaul
...sf11 lidar bracket with 5 degrees tilt by rorypaul
thingiverse
bracket for the lightware sf11 with a 5 degree tilt
thingiverse
free
Pan and Tilt by golanmi97
...pan and tilt by golanmi97
thingiverse
simple pan and tilit
print settings:
3 to 4 walls
20 % infill
made in nx 11
enjoy !
thingiverse
free
Tilted bowl by AdmiralPumpkinPie24
...wl by admiralpumpkinpie24
thingiverse
this is a fancy tilded ( and elegant) bowl,
its measures are : 25,8 cm x 29,7 cm x 16,4 cm
thingiverse
free
Tilt Case by natko
...router job, 4mm thick x 1200mm x 600mm sheet needed and designed for itx psu
and this will change when got build platform sorted.
thingiverse
free
Icom IC-705 Tilt bail by Dl9rnv
...icom ic-705 tilt bail by dl9rnv
thingiverse
tilt bail for icom 705 qrp transceiver. printing time about 25min on cr-10
thingiverse
free
beehive tilt
...hive inclinator different inclinations. 2 units per hive
inclinador para colmena diferentes inclinaciones. 2 unidades por colmena
thingiverse
free
JD TILT BIN STORAGE by jakobdam
...t snap in and that's it.
outer dimensions: 8 x 9.5 x 7 cm
can be scaled up but not down as the walls will become too brittle.
thingiverse
free
ZMR250 Fatshark Pan Tilt by EB5TC
...needed to rotate the piece 90º.
http://www.banggood.com/fatshark-fpv-pan-tilt-mount-with-9g-servo-180-degree-gimbal-p-953567.html
thingiverse
free
Trackball tilt offset by samesser
...ackball tilt offset by samesser
thingiverse
this is a thing to improve the ergonomics of a trackball to a more neutral position.
thingiverse
free
E3D BigBox tilted camera case by alex9779
...in the stock part the camera is tilted by 15° down which was too low for me so i created this part which tilts the camera by 25°.
thingiverse
free
Tilted Batarang Base by Fergi111
...was designed with that in mind. it is only 145 mm on the x. i used billzarek's batman symbol and articulated it in tinkercad.
thingiverse
free
Pan Tilt Mechanism - Version A by inertiarobotics
...suitable for robotic applications, rc cars, boars , airplanes.
details here:
https://github.com/inertiarobotics/pan-tilt-camera-a
thingiverse
free
Mobius Tilt Gimbal by ssayer
...to self-tap the holes. obviously you'd still need the "pan-tilt-base-camara" from the original make, and a servo...
3dfindit
free
62120 Tilt Head Precision Adjuster
...62120 tilt head precision adjuster
3dfind.it
catalog: wixroyd
3dfindit
free
62040 Tilt Head Precision Adjuster
...62040 tilt head precision adjuster
3dfind.it
catalog: wixroyd
3dfindit
free
62100 Tilt Head Precision Adjuster
...62100 tilt head precision adjuster
3dfind.it
catalog: wixroyd
3dbaza
$4
Roche Bobois Tilt armchair (136909)
...aza
roche bobois tilt armchair 3d model.<br>v-ray render and materials<br>lighting setup is not included in the file
thingiverse
free
Echo Show 5 tilt table
... of amazon echo show 5 by 12.5 degrees.
parts are divided into two.
please bond by sandwiching four strong 16mm magnets of daiso.
thingiverse
free
iPhone 5 tilting stand by _Ezra
...apse video's. the stand allows you to keep your phone in a tilted position. the phone can be tilted 360°, with 6° increments.
thingiverse
free
FPV cam tilt degree meter by oxivanisher
...t degree meter by oxivanisher
thingiverse
this tool is a easy way to measure your fpv cam tilt degree.
each opening is 10° wide.
thingiverse
free
Oblique Active Tilt mod for RCExplorer Bicopter by LitterBug
...t axis for the rcexplorer bicopter. slips on the 10x10mm carbon tube and the tilt is then mounted to the 45 degree printed beam.
thingiverse
free
Robo R2 Camera Tilt Fix by WheresWaldo
...e video to be tilted 10° because robo's fix was to use an html transform to rotate the image rather than fixing the hardware.
thingiverse
free
Pan Tilt Mechanism by KillerGardevoir
... the mcad library (involute_gears.scad only, plus its dependencies). this is my first model made using openscad, so be gentle ;p.
thingiverse
free
Tilt Switch Anemometer by Seth_Proaps
... pvc pipe.
required hardware
m3 screws x6
603 (fidget spinner) ball bearing
6.5mm diameter x 12 mm neodymium magnet.
tilt switch.
thingiverse
free
Motor Tilt Bracket Bushes Mariner/Mercury 40hp ELO manual trim/tilt by BrianvanNiekerk
...m/tilt by brianvanniekerk
thingiverse
bushing for the bracket that keeps up 1987 and newer mariner/mercury 30 and 40hp outboards
thingiverse
free
GoPro Mount exopro 20 deg tilt by T0PS
...gopro mount exopro 20 deg tilt by t0ps
thingiverse
gopro mount exopro 20 deg tilt for qav-r.
thingiverse
free
Tilted Motormounts for Mini H-Quad FourOut by smartshapes
...tilted motormounts for mini h-quad fourout by smartshapes
thingiverse
10 degree tilted motormounts for mini h-quad fourout
thingiverse
free
Pan-Tilt cam by rapanapa
...pan-tilt cam by rapanapa
thingiverse
parts:
sg90 x 2
raspberry pi camera module
thingiverse
free
MAXNOMIC Tilt Mechanism Handle
...maxnomic tilt mechanism handle
thingiverse
is a bit shorter than the normal handle, but works just fine.
thingiverse
free
Audioengine A5+ Tilting Stand by forg0t
...very little filament. the nub in the back stick into the camera tripod hole while helps align the stand. currently using on a5+
thingiverse
free
GoPro Cradle Tilt 30º by ChanCopter
... force of the strap and crash is dispersed evenly over the camera base. works well with the gopro platform for the hovership zuul
thingiverse
free
Ultimaker Z-tilt adjustment by Berend
...tment.
the printing platform is supported by 3 adjustment screws.
you pay a little stability but you get a tiltfree printplatform
thingiverse
free
Desmond DMH-2 Tilt Head Spacer by AstroStock
... tilt head. i created this to use on a motion slider so my pan/tilt controller would clear the rail in a steep vertical position.
thingiverse
free
Hydrophobe Hero 8 Tilt Mount by niklasm
...y niklasm
thingiverse
shendrones hydrophobe tilt camera mount. use with waterproof mini metal gear servo and aluminum servo arm.
thingiverse
free
Logitech trackball mouse ergo tilt by Fanon
...ingiverse
25deg tilt for better ergonomics for a old logitech trackball mouse for my home office. attach to the mouse with tape.
thingiverse
free
MX2 EPP + SWIFT II PAN&TILT
...mx2 epp + swift ii pan&tilt
thingiverse
simple pan&tilt mechanism for swift ii camera mounted over a mx2 epp airplane.
thingiverse
free
Ring Doorbell Angle Wedge With Tilt by dkrider
...e
this is a modified version of ring doorbell angle wedge. it has a slight vertical tilt so that it can be mounted to shingles.
thingiverse
free
iPad Tablet Stand with adjustable tilt by rtsandiego
...diego
thingiverse
tablet stand suitable for ipads (including the mini). stand has a cam you can position for adjusting the tilt
thingiverse
free
Mobius Pan & Tilt with 9gram servos by blistik
...eap online versions. tilts from level though to 90deg forwards. base fits the bix3 fpv canopy perfectly. 50grams auw with servos.
thingiverse
free
Tilt Base for Webcam by crstrand
... surface roughness serves as a position lock.
i printed this in petg because that is what was on the printer. pla would be fine.
thingiverse
free
Phone holder pan and tilt by wakaru44
... tilt controlled with cheap small servos.
it's part of a bigger project to have a phone mounted on top of a juno rover robot.
thingiverse
free
Tilt/Swivel Screen Mount by casesensitive
...ceptre 19" led tv.
very specific model, whatever...
update:
added swivel and front stop for tilt to prevent tv falling over.
thingiverse
free
Pan and Tilt FPV GoPro Mount by CXframes
...
minimal pan tilt for fpv camera and gopro or similar action cameras.
remixed of --> https://www.thingiverse.com/thing:696864
thingiverse
free
Runcam Split Mini Pan and Tilt by Vortecks
...thingiverse
this is v1 of my pan & tilt for the runcam split mini.
i also have a pod for the mini talon that this fits into.
thingiverse
free
Tilted Tablet Stand by Mebro2020
...tilted tablet stand by mebro2020
thingiverse
the stand can support tablets that are less than 9mm thick. enjoy! :)
thingiverse
free
Tilted Fan Mount by EchoEcho
...tilted fan mount by echoecho
thingiverse
mount a 60mm fan in an angle and extract the air through an opening at the back.
thingiverse
free
Pan Tilt mount for ProtoTank by elkayem
...unts out there on thingiverse, for example, http://www.thingiverse.com/thing:350229 and http://www.thingiverse.com/thing:1242570.
thingiverse
free
Stepper Pan Tilt by 3dfbomb
... needed for this
alternative https://www.thingiverse.com/thing:2516471
visit my etsy https://www.etsy.com/shop/shadowknightprints
thingiverse
free
Pan and Tilt for Durafly P51D by McRunBecks
...nto the cockpit of the durafly p51d.
you will need:
two 9g servos
one cross arm
one single arm
four servo mounting screws
spy cam
thingiverse
free
RC AIRPLANE FPV USE PAN/TILT CAMERA by shihron
...rc airplane fpv use pan/tilt camera by shihron
thingiverse
this is a fpv use pan/tilt camera