thingiverse

free

4Max Spoolholder by layos82

...4max spoolholder by layos82 thingiverse this is a remix of https://www.thingiverse.com/thing:2909802 for the anycubic 4max

thingiverse

free

4MAX - BLTouch Holder

...4max - bltouch holder thingiverse -

thingiverse

free

Anycubic 4MAX LCD Cover by HuGhost

...anycubic 4max lcd cover by hughost thingiverse anycubic 4max lcd cover clean and 4max logo better fit

thingiverse

free

Knob for Anycubic 4MAX by aziodale

...ob for anycubic 4max by aziodale thingiverse bigger knob for anycubic 4max, facilitates bed adjustment by requiring less force.

thingiverse

free

4Max Pro Vibration Damper

...pro vibration damper thingiverse a vibration damper made for the anycubic 4max pro. also reduces the jerk noises of the printer.

thingiverse

free

Anycubic 4Max Pro Cable Chain

...anycubic 4max pro cable chain thingiverse cable chain for anycubic 4max pro

thingiverse

free

Camera mount C270 on 4Max by Kimmeke

...camera mount c270 on 4max by kimmeke thingiverse c270 logitech mount for 4max anycubic

thingiverse

free

4Max Pro Filament Miniature Cleaner

...4max pro filament miniature cleaner thingiverse a miniature of the anycubic 4max pro as a filament cleaner

thingiverse

free

4MAX LED Holder by runUNDfun

...d holder by runundfun thingiverse 4max/fourmax led holder. inserted two 2mm holes to fixed the led stripe with a small zip tie.

thingiverse

free

Anycubic 4Max update by film4rk

...lm4rk thingiverse i made this because some pla spool does not fit in the 4max, there are too big, with this i solve the problem.

thingiverse

free

Bed Knob Anycubic 4MAX by HuGhost

...stl: distance to the next stick 0,1mm for i3 mega -https://www.thingiverse.com/thing:3123902 -also suitable for 4max is smaller

thingiverse

free

Bed Cable Holder for Anycubic 4MAX by NGR923

...bed cable holder for anycubic 4max by ngr923 thingiverse cable holder for anycubic 4max

thingiverse

free

SSR Case for Anycubic 4Max by Richtl-M

...ssr case for anycubic 4max by richtl-m thingiverse a ssr case for anycubic 4max.

thingiverse

free

Appendice manico sportello Anycubic 4max pro

...appendice manico sportello anycubic 4max pro thingiverse appendice manico sportello anycubic 4max pro

thingiverse

free

4Max Pro Wire Holder Y-Axis

...4max pro wire holder y-axis thingiverse 4max pro wire holder y-axis 3

thingiverse

free

Longer cooling duct for Anycubic 4Max by Kimmeke

...longer cooling duct for anycubic 4max by kimmeke thingiverse replaced nozzle on 4max and made longer cooling duct.

thingiverse

free

DiiCooler Mod for Anycubic 4Max Pro

...ubic 4max pro thingiverse still in progress! maybe one of the best fan cooler in the 3d printer world modified for the 4max pro.

thingiverse

free

Filament roller for 4MAX by easyrider1984

...filament roller for 4max by easyrider1984 thingiverse a filament roller with bearing.

thingiverse

free

Anycubic 4Max Pro Part Cooling Duct

...anycubic 4max pro part cooling duct thingiverse remix for anycubic 4max pro printer. the 10mm version is 23mm hight.

thingiverse

free

4MAX Pro NikoNizer

...4max pro nikonizer thingiverse i needed a holder for my tools, but with the slot for the scraper, which i couldnt find.

thingiverse

free

ANYCUBIC 4MAX by WeberPapa

...anycubic 4max by weberpapa thingiverse to close your box, for abs printing and reduice the noise about the fan (close to me)

thingiverse

free

Anycubic 4Max top cover dummy

...a dummy model of the top lid part of the anycubic 4max 1. this will serve you in order to design your own lid or cover structure.

thingiverse

free

Anycubic 4MAX PRO Fan Duct

...giverse this is pro version of fan duct dedicated to anycubic 4max pro. easy to print just use abs and supports from base only.

thingiverse

free

4max Pro Tool Holder Remix

...m on the putty knife slot to straighten that out. printed at 10% with a brim and no support on the 4max pro. tool about 8 hours.

thingiverse

free

AnyCubic 4Max - Z endstop fine adjustment by JavPerez

...anycubic 4max - z endstop fine adjustment by javperez thingiverse anycubic 4max - z endstop screw for fine adjustment.

thingiverse

free

4Max Pro v2!! Circular Fan Duct by etet100

...4max pro v2!! circular fan duct by etet100 thingiverse a circular fan duct adapted for the anycubic 4max pro 2.0.

thingiverse

free

4Max Pro Fan by MatiasAK212

...4max pro fan by matiasak212 thingiverse does not need supports. material: petg infill: 100%

thingiverse

free

Fan duct for 30 mm throat - Anycubic 4MAX by NGR923

...fan duct for 30 mm throat - anycubic 4max by ngr923 thingiverse fan duct for 30 mm throat - anycubic 4max

thingiverse

free

Anycubit 4MAX 3D printer filament spool holder by murbay

...anycubit 4max 3d printer filament spool holder by murbay thingiverse anycubic 4max 3d printer filament spool holder

thingiverse

free

4MAX - Z-Max Mount

... limiter. after starting z steppermotor goes always a little bit down and there no z-max detection, so z bumps against the motor.

thingiverse

free

Cover for handle gap Anycubic 4Max by Sp4wN

...or handle gap on anycubic 4max 3d printer. i used supports but it is not necessary, it is really easy to remove supports though.

thingiverse

free

Anycubic 4Max Pro - Light for the Nozzle

...anycubic 4max pro - light for the nozzle thingiverse my version for an additional light for nozzle

thingiverse

free

4MAX PRO flat cable protector

...4max pro flat cable protector thingiverse ciao, ... si capisce a cosa serve? :-)

thingiverse

free

ANYCUBIC 4MAX hole cover by noriyuki_takashima

... and y motor. although its main use is protection from dust, there may be only a little effect of heat retention during printing.

thingiverse

free

4Max Pro

...eo to understand how to use the code below: g1 x-3 y40 g1 x-3 y5 g1 x-3 y40 g1 x-3 y5 youtube video: https://youtu.be/f8xu8kx0etu

thingiverse

free

4Max Pro v2!! Cooling duct (V6 MOD!) by etet100

...4max pro v2!! cooling duct (v6 mod!) by etet100 thingiverse part cooling duct for 4max pro v2 with v6 (23x16x10) heat block.

thingiverse

free

4Max Pro 1Layer Test (270x205)

...4max pro 1layer test (270x205) thingiverse check out if your bed is good levelled.

thingiverse

free

Anycubic 4MAX Display-Cover Remix by Geek3Dde

...anycubic 4max display-cover remix by geek3dde thingiverse new remix

thingiverse

free

Bed levelling 4MAX

...ad video, but it shows ok how it should / can be used. https://www.youtube.com/watch?v=ttzfizfk9mo&feature=youtu.be have fun.

thingiverse

free

fan duck for Anycubic 4max pro

...fan duck for anycubic 4max pro thingiverse print it with supports only from the hotbed there is a version for a volcano

thingiverse

free

Allen wrench Bracket for Anycubic 4max by svenyc

...allen wrench bracket for anycubic 4max by svenyc thingiverse support 1.5mm to 6mm

thingiverse

free

Anycubic 4Max Pro 2.0 Ultimate Fan Duct by JHMiniatures

...is is not an elegant remix, its very hacky but it works like a charm. it's designed to use the stock hardware. happy printing

thingiverse

free

Filament-Holder-4Max-Remix by Geek3Dde

...filament-holder-4max-remix by geek3dde thingiverse filament-holder-remix ist breiter als das original

thingiverse

free

Anycubic 4max Dustcover 100% printable by matflat

...ine. print the handle from the side. at least glue everything together. (do not use heatglue) feel free to modify it as you like

thingiverse

free

4max pro SD guide/guard

...ard. will definitely update later. probably never. use w/ double sided adhesive tape. print with any plastic you want. take care.

thingiverse

free

Vertically printable fan duct for 4MAX pro

...vertically printable fan duct for 4max pro thingiverse low overhang fan duct.

thingiverse

free

Anycubic 4max pro stepper driver fan duct with chipset vent by happyhop

...anycubic 4max pro stepper driver fan duct with chipset vent by happyhop thingiverse немного изменил для установки в 4max pro

thingiverse

free

4Max Pro BLTouch Cable Holder

...x pro bltouch cable holder thingiverse this construction holds the cables of your in printhead installed bltouch/3dtouch sensor.

thingiverse

free

Anycubic 4max pro 2.0 cura profile by omarhaasan

... 4max 2.0 cura profile so they send these files i will share it with you unfortunately still have some stringing with esun pla+

thingiverse

free

"KISS Duct" for ANYCUBIC 4Max Pro

... block temperature drop. at use. set "initial fan speed" and "regular fan speed" to prevent the duct melting.

thingiverse

free

4Max Spoolholder 85mm by rexina

...a remix of https://www.thingiverse.com/thing:3002830 but wider (for spools up to 85 mm). you can use it with bearings or without.

thingiverse

free

Anycubic 4MAX upper enclosure KIT by NGR923

...anycubic 4max upper enclosure kit by ngr923 thingiverse upper enclosure kit for anycubic formax

thingiverse

free

Wires holders collection AnyCubic 4MAX (2020 profiles) by JavPerez

...anycubic 4max and 2020 profiles in all sizes. 9diameter, 12diameter and 15diameter are rounds, and clip is for inner small wires.

thingiverse

free

(UPGRADED) Anycubic 4MAX cooler by I_CREATE

...he anycubic 4max! this easy to print part drastically changed the print quality on my printer, as well as overhang capabilities.

thingiverse

free

Anycubic 4max pro duct - hobot by Kilovad

...e jets to flow around the nozzle. it is possible to install a protective screen to prevent the cube from cooling by air currents.

thingiverse

free

Cooling Duct V3 for Anycubic 4Max by easyrider1984

...he duct height is adjustable, range about 4mm, to get more accurate cooling target. other materials: 2xm3.5-10 bolts, 3xm3.5 nuts

thingiverse

free

Spulholder Anycubic 4Max Pro

...much more subtle, but not so stiff and a 2kg spool should be marginal if it would fit the diameter for a maximum of 250mm spools.

thingiverse

free

Anycubic 4Max Pro Build plate was sagging in the middle correction

... correction with a aluminum profile with thread in the middle, be careful not to get into the center not to damage the thermistor

thingiverse

free

Titan Aero extruder base for Anycubic 4Max Pro

...ock extruder has some issues. i decided to replace it to titan aero + volcano (due to distance between rods and glass near 30mm).

thingiverse

free

8025 fan Side Cover For Anycubic 4max by svenyc

... for tmc drivers cool down also good to be silence you need a 8025 fan and another switch and another ac socket a moon logo on it

thingiverse

free

Anycubic 4Max Pro Filament Cleaner by Wooden_Loony

...max pro filament cleaner by wooden_loony thingiverse printing with bridges\ drillhttps://www.thingiverse.com/thing:4056076/files

thingiverse

free

ANYCUBIC 4MAX-PRO Power Switch Protector

... protector is composed of two part, the protector and the back cap. the back cap should be printed with red colour. enjoy enrico.

thingiverse

free

2kg Spool holder for Anycubic 4Max Pro by AndreyPrikupets

...nal thing for spool holder for anycubic 4max pro, but longer. longer thing is needed prevent spool edge touching filament inlet.

thingiverse

free

Anycubic 4Max(Pro) Tool Holder

...t 0.2mm layer height and 10% infill but the settings don't matter too much unless you're trying to make the part heavier.

thingiverse

free

4Max Display Gehäuse by xXIssiXx

... die halterung wird auf der rückseite mit 2 schrauben befestigt. benötigte schrauben: 4x m3x20mm 4x m3x4mm 2x m3x16mm 2x m4x18mm

thingiverse

free

Anycubic 4Max Top Cover by Die_Bastelkammer

...find on my blog: https://diebastelkammer.wordpress.com/2018/06/22/anycubic-4max-diy-abdeckhaube-halt-die-warme-fur-den-abs-druck/

thingiverse

free

Filter fan duct for Anycubic 4Max Pro

...filter fan duct for anycubic 4max pro thingiverse design far from perfect, but it is better than hot air blowing on drivers.

thingiverse

free

Anycubic 4MAX Display by Schlumpfi2411

...nst mich auch unterstützen wenn du willst. paypal: www.paypal.me/tfenk habt ihr verbesserungen oder vorschläge?!? mail an mich :d

thingiverse

free

60mm Anycubic 4Max Classic Cooling Fan by benmarte

...s just print with supports from the bed no need to do any post-processing to clean the vents etc. just print and mount it, enjoy.

thingiverse

free

Anycubic 4Max Pro PLA profile for Cura 4.5

...d the best pla profile setup. you can try it, it is working very good. please unzip this profile and let me know your outcome....

thingiverse

free

Anycubic 4MAX Side Cover 60mm Fan by HuGhost

...anycubic 4max side cover 60mm fan by hughost thingiverse side cover for 60mm fan 2mm and 4mm air slots

thingiverse

free

Anycubic 4Max Pro Head Limit Slim by Darkluxifer

...ic 4max pro head limit slim by darkluxifer thingiverse once the lid is removed, using this object will make it easier to access.

thingiverse

free

Anycubic 4Max Pro DUAL MOSFET MOUNT by 666cin

...oling fan. because i'm using my own cooling mod - i just used mounting points to create holder for new mosfets. enjoy. marcin

thingiverse

free

Silicone damper for Anycubic 4max Ultrabase negative form by HuGhost

...abs and aceton vaporized. 1 mm difference back side to front lid with and without 3mm rod. you can use m3 screws or a screw clamp

thingiverse

free

Spool Holder for Anycubic 4MAX Pro

...he factory was too small and the filament spool did not become loose. i recommend printing with supports touching the buildplate.

thingiverse

free

Anycubic 4max pro MeanWell LRS-350 Replacement Top for Noctua 60*25 by happyhop

...op for noctua 60*25 by happyhop thingiverse крышка блока питания anycubic 4max pro для установки тихого вентилятора noctua 60x25

thingiverse

free

Protector trasera LCD 4MAX by Franciscoxx

... franciscoxx thingiverse es una simple cubierta para la parte trasera del lcd para que no le entre polvo ni restos de filamento.

thingiverse

free

4MAX Pro - Trust Webcam Spotlight Pro Stand

...4max pro - trust webcam spotlight pro stand thingiverse supporto per la economica webcam spotlight pro di trust

thingiverse

free

Anycubic 4Max Pro - Voltage Selector Cover by PixelatedDad

...ed this up quickly. super easy to print, no rafts or supports needed (its printed upside down on purpose to make printing easier)

thingiverse

free

BLTouch holder for anycubic 4max

...ou want to use this holder you must use 40x40x10 fan and radiator. in deatful system is 40x40x20 fan and radiator is not include.

thingiverse

free

Led strip cover AnyCubic 4MAX mod by JavPerez

... free. there is a strip on each side on the y axis and a strip on the x axis above the door. they are printed on transparent pla.

thingiverse

free

Fillament Guide for Anycubic 4Max by easyrider1984

... drill after printing. there are 2 version, they both works. the half-chopped version is for not interfering with the set screws.

thingiverse

free

Anycubic 4Max pro central bed lever by claudio3g

...ly the main bar is not printed, il is a steel bar 25x5x230mm. it has a threaded hole in the middle and a screw m3. that's all

thingiverse

free

Anycubic 4Max Filament Usage Meter by Sp4wN

...e oem spool holder, but i am not sure. you need 2x 30mm m4 screws, the filament sensor can be mounted with the original m4 screw.

thingiverse

free

Anycubix 4Max Pro Shroud Upgrade

...etter format to improve the cooling. requires no support and has a small break away piece to allow for easy printing and removal.

thingiverse

free

Anycubic 4MAX - leveling + plotter support by WeberPapa

...papa thingiverse 2 in 1 pen plotter support and bed leveling pen plotter is perfect to calibrate x and y include solidworks file

thingiverse

free

Anycubic 4Max by pool9

...das blech komplett neu gezeichnet und mit einem noctua 40x40x20 lüfter ausgestattet , siehe da , enorme was es jetzt leiser ist .

thingiverse

free

BLTouch mount for Anycubic 4Max by balek

...b:https://github.com/agkaminski/marlin please note that it also contains other tweaks (i.e. support for tmc2208 stepper drivers).

thingiverse

free

Anycubic 4Max Pro Filament Holder

...ot fed up with the metal one! printed only support from build plate..... just slots in the same place, no other fixings required.

thingiverse

free

Guide for flexible filaments Anycubic 4Max (MK8 extruder) by moschito

...ooved wheel from the extruder, you just put the guide on the throat and fix it with double-sided adhesive tape (or other method).

thingiverse

free

Anycubic 4Max Pro Y axis rod limiter

... for the rod to travel but it won't fall out. you need 2 pieces for both sides. you can scale it down to about 70-80% height.

thingiverse

free

4max Pro Dial Indicator Holder

... not face you but it should be sturdy. printed without any compensations or support. only a brim is needed to hold it to the bed.

thingiverse

free

Fan cover 4MAX

...ing the filament down to the correct place. if you've thrown away the spacers or lost them, i've made them too. have fun.

thingiverse

free

ANYCUBIC 4Max Pro Tool organizer

... part is for persons whom likes order :) there is one extra position, it's for the knife (not included in printers tool set).

thingiverse

free

40 mm Air Filter Fan Adapter for Anycubic 4Max Pro 2.0 by Hartrusion

...ic 4max pro 2.0 with a 40 mm fan, without changing other parts. the part was designed to fit a noiseblocker blacksilent xm-2 fan.

thingiverse

free

Anycubic 4MAX motherboard cover with 80mm fan and Raspbery Pi 3 case

...ad of standard usb cord. i moved from default trigorilla motherboard to skr 1.3 with installed marlin 2.0 so it is not a problem.

thingiverse

free

V3 Spulholder Anycubic 4Max Pro by JustinX

...wo measures to save some material, but the holder is so big that it can just be printed on the 4max pro, i printed it in easyabs.

thingiverse

free

Anycubic 4Max Pro PTFE cutter by Bemko

...e radiator into the tool, then insert the ptfe tube all the way into the heatbreak and use a sharp knife to cut the ptfe to size.

thingiverse

free

4Max Filament Spool Holder by Bluecobra73

...e from rotating around the spool. the teflon-hose leading out of the printer is used a sspring to press the roll agains the hook.

thingiverse

free

4Max Titan Aero Mount by fpoussin

...2130 drivers on xyz (stepper direction is reversed compared to generic drivers) pt1000 + 4.7k pullup temperature sensor on hotend

thingiverse

free

E3D V6 carriage for 4Max by Chrisitan

...pgrades in the future. the new fan duct should have even better airflow and cool from 2 sides. it needs to be welded or glued on.

thingiverse

free

ANYCUBIC 4MAX PRO Y CARRIAGE LM8UU LMU8 BEARINGS IGUS by 666cin

...sing misumi lmu8 - which are the best for me. right carriage can be printed w/o supports. left one require support. enjoy! marcin

thingiverse

free

Anycubic 4Max Extruder Stepper Motor Cooler NEMA 17 by Sp4wN

...claimer: i am not claiming you can solve the ticking problem with this thing, there are several other factors can cause this too.

thingiverse

free

Axis m1025 Cam Mount for Anycubic 4MAX 1. Gen by eckonator

...ckseite ein loch für die cam gebohrt und eine halterung dafür benötigt. rausgekommen ist dabei dieses bauteil. viel freude damit.

thingiverse

free

ANYCUBIC 4MAX LED DUCK COOLER by antopos

...millimetri al di sopra dell'ugello. una volta montato il duck misurarne l'altezza e, se necessario, alzare l'hot end.

thingiverse

free

Anycubic 4Max top raiser by sergeyksv

...com/thing:3407123 usb hole cap https://www.thingiverse.com/thing:3410807 cable hole cap https://www.thingiverse.com/thing:3412175

thingiverse

free

Top enclosment for Anycubic 4max by Sinistros

...r frame/cover could be combine in one piece. ithink 3 parts is easier to handle and print. version to print without windows added

thingiverse

free

Duct for Anycubic 4MAX Pro

...uence of temperature. the part has been designed so that you do not have to use supports. i encourage you to comment and like. :)

thingiverse

free

Anycubic 4MAX - Extruder Cable Guide on Filament Sensor Remix by Voodootec

...verse i like this cable guide but i didn't want to loosen all the cables so i make this remix with an open spot for easy fit

thingiverse

free

Modified LowerPlate BMG Carriage Mod by Lisuz for Anycubic 4Max Pro by lijgame

... friction when moving the carriage along x axis. i modified the lower plate by cutting the right part. now it works like a charm!

thingiverse

free

BMG Wind left for Anycubic 4Max Pro by VladimirK

...for fan duct and 2 for fan cooler). rest is for nuts and bolts m3 and 2 m4 for belt mount (see link above if you have questions).

thingiverse

free

Temperature display mount for Anycubic 4Max by Sp4wN

...thermometer-electronic-fish-tank-water-for-aquarium-drop-shipping-support/32799423978.html print as you wish, no supports needed.

thingiverse

free

Micro switch mount for Anycubic 4Max or any 2020 frame by Sp4wN

...ld plate option) just for the pins where the micro switch goes on. here a little demo:https://www.youtube.com/watch?v=4nnvumo0bv4

thingiverse

free

Anycubic 4Max Circular Fan Duct by Sp4wN

...supports in the air channels. i used 85° support overhang angle on cura 3.3.1 with no supports in the air channels in the circle.

thingiverse

free

Anycubic 4Max Pro fan duct MEGA STRONG COOLING

...working without silicone sock on heat block. this longer roof modeling the air flow to cool down under the nozzle. it is perfect.

thingiverse

free

Bed Leveling Assistant for Anycubic 4Max by Sp4wN

...or the maker of this code is not responsible if you damage your printer with this code, it is all on you if something goes wrong.

thingiverse

free

4max_pro_tray

...4max_pro_tray thingiverse 4max pro tray

thingiverse

free

Anycubic 4MAX PRO Internal Filament Mount Sensor Mount by 666cin

...mensions of the hole are in the pictures. all parts are printed from petg - due to temps in chamber which can be achieved. enjoy!

thingiverse

free

4max Pro / Makerbot print head with BMG dual gear extruder & E3D V6 hotend by Hbquax

... design for the cooling shroud (_4 instead of _3) with some stator vanes and a base plug for the fan plus an enlarged air outlet.

thingiverse

free

Power Supply Air Duct for Anycubic 4Max Pro 2.0 by Hartrusion

... distance behind the plastic cover and a lot of air will definitely just circulate. the part can just be glued to the side cover.