Thingiverse
ZMR250-X LOS-Trainer by altermac
by Thingiverse
Last crawled date: 3 years ago
This Quadcopter is for only one purpose: Training LOS skills with a 250-class multicopter.
Warning: The mid-plate (zmr250-x2-mid.stl) should be made from CF-Board. It suffers the same problems as all similar designs: The 3D-printed part is not tough, PLA printed parts will crack because of vibrations. After some time the part will look like shattered security glass, with cracks all over.
You need 3mm ZMR 250 spare arms, get 4 of them for about 10$ at ebay.
Get 4 small zipties that fix the battery-holder. You can use a 20mm Velcro-Strap for the battery. In a hard crash the Zipties will break, whats maybe better for the battery. The zip-ties go through all three plates.
Use http://www.thingiverse.com/thing:1684887 for a CC3D Atom, the green parts on the exploded view. This will stack your pdb, CC3D and RX. The stack is mounted to the mid-plate, the four screws can be accessed when everything is completed. You can also use any other flightcontroller (F3, F4) that supports 30.5x30.5mm-mounting.
The arms are fixed with 12mm or 16mm M3-Screws and locknuts, you need 16 of them. The PDB and FC are mounted with 30,5x30,5mm schema with M3-Screws. You need 4 10mm-M3 to fix the first Level Nylon-Spacer or 4 30mm-M3-Screws if you wan't to use my CC3D-stack.
You can use 5" or 6"-props, any small battery around 1000mAh to 2200mAh will be fine. I use http://www.thingiverse.com/thing:1905550 as motor-protector.
AUW of my build is 417g with 3S 1300 mAh and 448g with 4S 1300mAh.
Warning: The mid-plate (zmr250-x2-mid.stl) should be made from CF-Board. It suffers the same problems as all similar designs: The 3D-printed part is not tough, PLA printed parts will crack because of vibrations. After some time the part will look like shattered security glass, with cracks all over.
You need 3mm ZMR 250 spare arms, get 4 of them for about 10$ at ebay.
Get 4 small zipties that fix the battery-holder. You can use a 20mm Velcro-Strap for the battery. In a hard crash the Zipties will break, whats maybe better for the battery. The zip-ties go through all three plates.
Use http://www.thingiverse.com/thing:1684887 for a CC3D Atom, the green parts on the exploded view. This will stack your pdb, CC3D and RX. The stack is mounted to the mid-plate, the four screws can be accessed when everything is completed. You can also use any other flightcontroller (F3, F4) that supports 30.5x30.5mm-mounting.
The arms are fixed with 12mm or 16mm M3-Screws and locknuts, you need 16 of them. The PDB and FC are mounted with 30,5x30,5mm schema with M3-Screws. You need 4 10mm-M3 to fix the first Level Nylon-Spacer or 4 30mm-M3-Screws if you wan't to use my CC3D-stack.
You can use 5" or 6"-props, any small battery around 1000mAh to 2200mAh will be fine. I use http://www.thingiverse.com/thing:1905550 as motor-protector.
AUW of my build is 417g with 3S 1300 mAh and 448g with 4S 1300mAh.
Similar models
thingiverse
free
CC3D Atom mount by altermac
...//www.thingiverse.com/thing:1599750 to mount the screws thru both bottom plates. it makes live easier, when working with the pdb.
thingiverse
free
Diatone FPV250 Arm Fix by aleksas
...d 4 m3x10mm scews to attach the motor to the plate.
(or just improvise and use zipties/glue/whatever...)
print @ 100% infill.
thingiverse
free
ZMR 250 LowRider by altermac
...ike: when using all screws and locknuts for the arms it's a pain to remove the upper carbon to get a hand on the electronics.
thingiverse
free
Mini X Quad Frame for ZMR250 Arms by Phil_590
...scs
1x naze32 or cc3d board
1x reciever (i used the frsky d4r-ii)
2x 5x3 props (cw)
2x 5x3 props (ccw)
1x 1000mah 3s lipo battery
thingiverse
free
Spacers for Zmr250 racing drone by kwijatkowski
...g:1736627http://www.thingiverse.com/thing:1736621http://www.thingiverse.com/thing:1736423http://www.thingiverse.com/thing:1717323
thingiverse
free
MOSFET - housing
...screws and nuts (for assembling the mosfets, fan and top)
countersunk screw (to mount the housing)
zipties (to fix the cables)
thingiverse
free
ZMR250 High Skid plates by RAH101
...zmr250 high skid plates by rah101 thingiverse remixed similar skid plates, theese are a bit taller so you...
thingiverse
free
ZMR 250 Low Racer conversion spacer by Chuck314159
...d mount here: http://www.thingiverse.com/thing:1221401
xt60 holder with led strip mount: http://www.thingiverse.com/thing:1100613
thingiverse
free
ZMR250 Drone CC3D and Power Distribution board mount by l33tengineer
...unt the top base with one center screw.
4.mount the cc3d to top base with 2 or 4 screws.
created with solidworks
jaron kaczmark
thingiverse
free
CC3D and PDB stack (36mm boards, customized for Quanum Neon 250 frame) by olli13
... v1 or v2 - both with the standard spacers.
p.s. top v2 has a larger gap for the main-connector to see the two status led better.
Altermac
thingiverse
free
ZMR250 VTX-Holder universal by altermac
...e design. use a zip-tie to fix the vtx on the holder. you need to cut out the top-plate of a zmr250 to make room for the antenna.
thingiverse
free
Quad-/Tricopter Landing Gear 50mm by altermac
... with two zip-ties. it will lift the arm by 50mm. with a hard landing you only break the zip-ties. the 10mm leg weights about 4g.
thingiverse
free
ZMR250 Quadrocopter Landing Gear ziptied by altermac
...h by moving on the ziptie.
i created this version after some hassle with the screwed-version. i printed a flexible set with tpu.
thingiverse
free
CC3D Atom mount - glue in by altermac
....com/thing:526082), you need an opening in the body of your thing (plane or copter) to access the usb. check this before glueing.
thingiverse
free
Wrench for Sunnysky 2216 1250KV by altermac
...with pla although this might be to weak if you pull yout nut really tight. in this case use 100% infill to get a stronger wrench.
thingiverse
free
Hinge for R/C-plane by altermac
...your model.
there is another hinge for r/c-plane without holes. use that one when you glue your hinge to the surface of the wing.
thingiverse
free
Motor-wrench for Multistar Elite 2216-920kv by altermac
...another wrench for sunnysky 2216 1250kv motor ( https://www.thingiverse.com/thing:4661718 ) wich ist often used for a mini talon.
thingiverse
free
LED-Riser for Eheim classicLED by altermac
... ca (superglue), the other is put together with m3x16mm screw and m3-nut. there are three holes for m3 screws, you need only two.
thingiverse
free
VTX-Holder for ZMR250 by altermac
...ttp://www.thingiverse.com/thing:1266000
the et25-holder fits behind the led-spacer from http://www.thingiverse.com/thing:1599750
thingiverse
free
ZMR250 Quadrocopter Landing Gear by altermac
...oose once in a while, so pla is your eco-friendly choice.
v3.2: stronger sphere, older version was a bit thin for rough flying...
Zmr250
thingiverse
free
ZMR250 Parts by thunderbird18j
...zmr250 parts by thunderbird18j
thingiverse
zmr250 parts
thingiverse
free
ZMR250 Sidepanel by sitoca
...zmr250 sidepanel by sitoca
thingiverse
zmr250 sidepanel
thingiverse
free
ZMR250 Motorguards by sitoca
...zmr250 motorguards by sitoca
thingiverse
zmr250 motorguards
thingiverse
free
Motorguards for ZMR250 by Dimon372
...motorguards for zmr250 by dimon372
thingiverse
motorguards for zmr250
thingiverse
free
ZMR250 Feet by pupuyang
...zmr250 feet by pupuyang
thingiverse
zmr250 feet
thingiverse
free
Unispacer ZMR250 by darioc
...unispacer zmr250 by darioc
thingiverse
unispacer for zmr250 20mm
thingiverse
free
ZMR250 Spacer by meban
...zmr250 spacer by meban
thingiverse
zmr250 spacer (10 mm)
thingiverse
free
ZMR250 Stand by FPVpolska
...zmr250 stand by fpvpolska
thingiverse
this is the stand for zmr250 frame drone. enjoy :)
thingiverse
free
ZMR250 Backplate by robinmglsk
...zmr250 backplate by robinmglsk
thingiverse
zmr250 backplate, for mounting frsky d4r-ii and vtx
thingiverse
free
ZMR250 Part by BluefishNZ
...zmr250 part by bluefishnz
thingiverse
these are additional parts that can be used on a custom zmr250 quadcopter build.
Trainer
3d_ocean
$29
Trainer
...trainer
3docean
trainer
original trainer
archibase_planet
free
Trainer
...ator training apparatus gym equipment
trainer kinesis personal heritage n290411 - 3d model (*.3ds) for interior 3d visualization.
archibase_planet
free
Trainers
...trainers
archibase planet
running shoes jogging shoes footwear
trainers - 3d model (*.gsm+*.3ds) for interior 3d visualization.
turbosquid
$22
Trainer
...id
royalty free 3d model trainer for download as max and fbx on turbosquid: 3d models for games, architecture, videos. (1517866)
3d_export
free
elliptical trainer
...elliptical trainer
3dexport
elliptical trainer for running.
turbosquid
$55
Trainers
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$1
trainer
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
free
Trainer
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3ddd
$1
Total Trainer
...total trainer
3ddd
тренажер
тренажер total trainer. моделил по фото.
3d_ocean
$22
Elliptical Trainer
...uipement gym gymnastic indoor silver sport stepper trainer workout
3d model of black and silver elliptical trainer with computer.
Los
3ddd
$1
Paperminions - Los Increibles
...inions - los increibles
3ddd
paperminions , los increibles
paperminions - los increibles
3ddd
$1
DO-LO-REZ
...do-lo-rez
3ddd
do-lo-rez , moroso
do-lo-rez sofa
3ddd
$1
Do-lo-Res
... угловой
диван фабрика do-lo-res компонуется из отдельных боксов, разнообразных размеров и тканей.
3ddd
$1
Lo turi
...lo turi
3ddd
bensen
1200x1200
turbosquid
$30
Lock Lo
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
free
face lo
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3ddd
$1
DO-LO-REZ
...бы образовалась форма дивана, и закреплены к основе стальными булавками.
покрытия модели do-lo-rez несъемные. основа деревянная.
turbosquid
$41
Lo-profile Wheel.max
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$2
Espada - sword LO
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
free
Sofa Los Cabos
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.