Zmorph VX Templates for Simplify3D by SidHiscocks

Last crawled date: 3 years ago

Zmorph VX Templates for Simplify3D
This is a remix of Mike Bogutsch's (fortwienix) Wanhao Template for S3D, and my UM2 Template, Many thanks for his permission to use his instructions as below.
(The template I have made is for Simplify3D but I have read somewhere that it also works with other slicers.)
At the moment the Template is for the Zmorph 3dprinter heads and allows to to quickly see if you have the Dual (Y) Nozzle Head or the Single Nozzle Head profile
Simplify3D template Installation:
Copy the stl file (e.g. ZmorphBedDual.stl) to the following folder:
C: \ Users \ USERNAME \ AppData \ Local \ Simplify3D \ S3D software
Start Simplify3D and export your FFF profile to the desktop (File-> Export FFF profile)
Open the profile with an editor e.g:Notepad and search for the following entries (about line 145 ish)....
overridePrinterModels>0printerModelsOverride>.....change the upper value from 0 to 1 and in the second line enter the name of the template. like below
overridePrinterModels>1printerModelsOverride>TEMPLATE NAME.STLIf overridePrinterModels already is set to 1, you do not need to change this.
Save the FFF profile and import it back to Simpify3D
Restart Simplify3D
Have two profiles one for the Single Print head and one for the Dual (Y) Print Head, if you have a different print head let me kno the details and i'll do another file to suit.
Tip:
If you think the template is not centered. Import the model to Simplify3D, change the position and Export the model (File->Export Models->Export Binary STL)