Thingiverse
Zallus reflow oven controller v2 bezel by kiddingme
by Thingiverse
Last crawled date: 3 years ago
This is a bezel I designed to compliment the original enclosure on the Zallus website and the stand by Beaker. There is also a picture of the hardware I used which was purchased at Home Depot. I would suggest going with a slightly longer screw if possible.
Original Zallus enclosure:http://www.zallus.com/resources/
Stand by Beaker:http://www.thingiverse.com/thing:611186
(8) #4 x 5/8" or 3/4" pan head Phillips screws
(8) M3 flat washers
Original Zallus enclosure:http://www.zallus.com/resources/
Stand by Beaker:http://www.thingiverse.com/thing:611186
(8) #4 x 5/8" or 3/4" pan head Phillips screws
(8) M3 flat washers
Similar models
thingiverse
free
Zallus Oven Controller case stand by Beaker
....
update:
changed angle of stand for better balance.
added holes in bottom to allow for easier tightening of bottom screws.
thingiverse
free
Nextion NX4827T043 Bezel and Stand by minted52
...a small pilot hole in each triangle; use these holes with a drill and 4-40 tap to thread the holes so that a screw fits securely.
thingiverse
free
Zallus Reflow Controller Case, with mounting brackets and bezel by garyacrowellsr
...s. this has both, and some loops in the back that might be useful for cable management.
this case is for the rev 2 controller.
thingiverse
free
5/8"-27 Male to 1/4"-20 Female Screw Thread Adapter for Microphone
... my microphone on a stand for the camera. i create this 5/8"-27 male to 1/4"-20 female screw thread adapter. fit tight.
thingiverse
free
Yi Home Camera 3/8"-16 Screw Mount by aaronzhang
... printed directly, if you rarely disassemble it.
link of the screw adapter: http://amzn.to/2czvt92
model of the stand: atw tv-7wx
thingiverse
free
Zalman Reflow Oven Controller V1 - Case for 3.2 LCD by StealthMicro
...se to protext the device and actually use.
screw holes are a standard .10 diameter so most small self tapping screws will work.
thingiverse
free
1/4-20 Tripod screw set by amg0D
... and couldn't find something. there are various lengths:
1/4"
3/8"
1/2"
5/8"
3/4"
7/8"
1"
thingiverse
free
4.3" LCD Bezel and Box (Gameduino 2 LCD) by BrewBot
...8" inch machine screw). it is recommended to drill out this hole to 2.5mm so the screw can self tap into the pla bezel hole.
thingiverse
free
Raven Pro Scanner Stand
... me to "pull" the rods further into the holes by tightening the screws. it will still work without enlarging the holes.
thingiverse
free
Screw for Sleek Microphone Stand by FoxRom
...e stand
thread is 5/8" 27
i printed it with 0.1 layer height
fyi, i removed the inner hole, cause it made tightening harder.
Zallus
thingiverse
free
Zallus Reflow Oven PCB mounting bracket by JRad
...e
mounting bracket for this reflow oven kit from zallus designs.
http://www.zallus.com/reflow-oven-kit-assembly-instructions/
thingiverse
free
Zallus Oven Controller case stand by Beaker
....
update:
changed angle of stand for better balance.
added holes in bottom to allow for easier tightening of bottom screws.
thingiverse
free
Zallus Reflow Controller Case, with mounting brackets and bezel by garyacrowellsr
...s. this has both, and some loops in the back that might be useful for cable management.
this case is for the rev 2 controller.
thingiverse
free
Zalman Reflow Oven Controller V1 - Case for 3.2 LCD by StealthMicro
...3.2 lcd by stealthmicro thingiverse this is for the zallus v1 oven controller not the v2 * the case...
Kiddingme
thingiverse
free
USB shim by kiddingme
...extender pcb provided with the pi control kit. it gives the pcb just a bit more thickness for best fit in the raspberry pi ports.
thingiverse
free
Pi Control Packaging Shell by kiddingme
...ntrol packaging shell by kiddingme
thingiverse
this is the packaging shell i designed to help keep my kits safe during shipping.
thingiverse
free
Mini NES Embedded NFC Tray by kiddingme
...y kiddingme
thingiverse
the latch depressor should be a tight press fit and may require gentle persuasion with a pair of pliers.
thingiverse
free
USB Style A Bottom Shell No Upper USB port by kiddingme
...usb style a bottom shell no upper usb port by kiddingme
thingiverse
removed the rear upper usb port
thingiverse
free
NES minier with KiddingMe's tweaks by kiddingme
...guide to the front of it to properly space it from the front of the button hole openings.
button caps and cartridge:
-unmodified
thingiverse
free
Alternative button holder by kiddingme
...button from the front)
depth including plunger: 13.8mm.
buttons: http://www.frys.com/product/8770911?site=sr:search:main_rslt_pg
thingiverse
free
USB mount NC Miata by kiddingme
...t usb extension found on amazon:https://www.amazon.com/gp/product/b07j4st13k/ref=ppx_yo_dt_b_asin_title_o04_s00?ie=utf8&psc=1
thingiverse
free
Front USB finish trim for larger USB port by kiddingme
...rt by kiddingme
thingiverse
led alignment guide for soldering 3mm red led to pi control control board. spaces led ~5mm from pcb.
thingiverse
free
Cartridge mod requires no glue by kiddingme
...ve the x brace built into one half of the cartridge's. one version has the small recessed detail removed for easier printing.
thingiverse
free
Combo LED/Switch holder with backing coverd by kiddingme
...e button from the front)
depth including plunger: 13.8mm.
switch: http://www.frys.com/product/8770911?site=sr:search:main_rslt_pg
Reflow
3d_export
$29
Chemical Glass Reactor
...negative pressure in the sealed reactor. the evaporating and reflowng of the reacted solution is controlled. the material can...
thingiverse
free
DIY REFLOW OVEN by VILLOZZO88
...diy reflow oven by villozzo88
thingiverse
link to the projecthttps://www.villolab.org/2021/03/12/reflow-oven/
thingiverse
free
Reflow Holder by donaldsimonet
...//www.bumpdesign.fr/3d-print-stuffs/#reflow_holder
fix for hot air flow reflow resolder. diameter of the gun env. 30mm
use m6 nut
thingiverse
free
Zallus Reflow Oven PCB mounting bracket by JRad
...e
mounting bracket for this reflow oven kit from zallus designs.
http://www.zallus.com/reflow-oven-kit-assembly-instructions/
thingiverse
free
Solder tip and reflow cap holder by jasperpants
... hold the tips and reflow caps.
this works great and can be stuck on to the top of the reflow station with some doublesided tape.
thingiverse
free
Reflow Oven case by tedhuntington
...or this project:http://reprap.org/wiki/reflow_toaster_oven_using_thermistor
box contains:
1 arduino uno
1 solid state relay (ssr)
thingiverse
free
SMD Reflow Hot Air Heat Gun Mounting Bracket by PHolzwarth
...heat gun of a reflow workstation. it has space for a 10mm neodymium magnet and for screws, so that it can be mounted to the wall.
thingiverse
free
DIY Reflow Oven by polihedron
...e
rocker switch spst, 10a/250vac, ø20,2mm
some m3 screws, wires with thermal shielding, connectors
severin to-2068 20l 1500w oven
thingiverse
free
Reflow 858D+ Nozzle Holder by Sp0nge
...e: added a short version only 10mm,8mm,5mm
just a holder for 10mm,8mm,5mm and 3mm nozzle.
heat the pla and screw the screws in :)
thingiverse
free
Zallus Reflow Controller Case, with mounting brackets and bezel by garyacrowellsr
...s. this has both, and some loops in the back that might be useful for cable management.
this case is for the rev 2 controller.
Bezel
turbosquid
$20
Tactical bezel
...uid
royalty free 3d model tactical bezel for download as max on turbosquid: 3d models for games, architecture, videos. (1212612)
turbosquid
$30
Single bezel ring
...
royalty free 3d model single bezel ring for download as 3dm on turbosquid: 3d models for games, architecture, videos. (1327613)
turbosquid
$26
Bezel split shank ring
...alty free 3d model bezel split shank ring for download as 3dm on turbosquid: 3d models for games, architecture, videos. (1202921)
turbosquid
$30
SOLITAIRE BEZEL HALO RING
...d model solitaire bezel halo ring for download as 3dm and stl on turbosquid: 3d models for games, architecture, videos. (1340334)
turbosquid
$9
Heart Pendant w Bezel
...model heart pendant w bezel for download as 3dm, stl, and obj on turbosquid: 3d models for games, architecture, videos. (1678731)
3d_export
$5
basic close volume of bezel door
...rt
this is files for the basic close volume of the bezel door. the close volume of an automotive interior part in catia software
turbosquid
$22
Ring BEZEL Trefoil HB
...l trefoil hb for download as 3ds, max, obj, fbx, stl, and ztl on turbosquid: 3d models for games, architecture, videos. (1349133)
turbosquid
$22
Ring BEZEL Trefoil Band
...il band for download as 3ds, max, obj, fbx, 3dm, stl, and ztl on turbosquid: 3d models for games, architecture, videos. (1349144)
turbosquid
$22
Ring Wave HB-110 BEZEL
...0 bezel for download as 3ds, max, obj, fbx, 3dm, stl, and ztl on turbosquid: 3d models for games, architecture, videos. (1349112)
turbosquid
$22
Ring Wave Band 110 Bezel
...0 bezel for download as 3ds, max, obj, fbx, 3dm, stl, and ztl on turbosquid: 3d models for games, architecture, videos. (1349148)
Oven
3d_export
$5
oven
...oven
3dexport
this electric oven. the oven door can be animated.
archibase_planet
free
Oven
...en
archibase planet
oven electric oven kitchen-range kitchen range
oven n081111 - 3d model (*.3ds) for interior 3d visualization.
archibase_planet
free
Oven
... planet
oven oven panel kitchen equipment
panel oven smeg cortina n030414 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Oven
...oven
archibase planet
oven kitchen equipment
oven - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Oven
...oven
archibase planet
oven kitchen equipment
oven - 3d model (*.gsm+*.3ds) for interior 3d visualization
archibase_planet
free
Oven
...oven
archibase planet
oven kitchen-range kitchen appliances
oven - 3d model for interior 3d visualization.
archibase_planet
free
Oven
...oven
archibase planet
oven kitchen equipment
oven - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Oven
...oven
archibase planet
oven kitchen equipment
oven - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Oven
...oven
archibase planet
oven kitchen equipment
oven - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Oven
...oven
archibase planet
oven kitchen equipment
oven - 3d model (*.gsm+*.3ds) for interior 3d visualization.
V2
3d_export
free
Lamp v2
...lamp v2
3dexport
lamp v2 with solar panel
3d_export
$5
hammerhead v2
...hammerhead v2
3dexport
razer hammerhead v2 headphones, modeled in cinema 4d, render in corona
3d_export
$5
manometer v2
...manometer v2
3dexport
3d_export
$5
potato v2
...potato v2
3dexport
turbosquid
$52
Lifebuoys v2
...squid
royalty free 3d model lifebuoys v2 for download as fbx on turbosquid: 3d models for games, architecture, videos. (1560870)
turbosquid
$2
Mask v2
...turbosquid
royalty free 3d model mask v2 for download as stl on turbosquid: 3d models for games, architecture, videos. (1527741)
turbosquid
free
Flashlight V2
...d
free 3d model flashlight v2 for download as , obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1663559)
turbosquid
$29
Thanos v2
...
royalty free 3d model thanos v2 for download as ztl and obj on turbosquid: 3d models for games, architecture, videos. (1651077)
turbosquid
$29
Titan v2
...d
royalty free 3d model titan v2 for download as ztl and obj on turbosquid: 3d models for games, architecture, videos. (1540228)
turbosquid
$29
Frieza v2
...
royalty free 3d model frieza v2 for download as ztl and obj on turbosquid: 3d models for games, architecture, videos. (1701238)
Controller
3d_ocean
$4
Controller TQFP32
...qfp32
3docean
chip controller cpu electronic gpu mcu micro controller silicon smd tqfp wafer
a micro controller in tqfp32 package
3d_ocean
$4
Controller TQFP44
...44
3docean
chip controller cpu electronic gpu mcu micro controller package smd tqfp tqfp44
a micro controller in a tqfp44 package
3d_export
$15
control unit
...control unit
3dexport
control unit
3ddd
$1
Yacht control
...yacht control
3ddd
yacht control
3d_export
$5
controle pgdm
...controle pgdm
3dexport
carcaca controle pgdm
turbosquid
free
controler
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3ddd
$1
Control
...
http://www.schmitz-leuchten.de/html-ru/einzelleuchten-lampentyp-details.php?lamptype_no=700&group;=917&id;=731
3d_ocean
$4
Controller TQFP100
...100
3docean
chip computer cpu electronic gpu mcu micro controller pin platine silicon wafer
a micro controller in tqfp100 package
3d_ocean
$4
Controller TQFP64
...qfp64
3docean
chip computer cpu gpu mcu micro controller package silicon tqfp tqfp64 wafer
a micro controller in a tqfp64 package
3d_ocean
$7
Remote controller
... control switcher tv remote
remote controller for tv, sound systems etc easy to edit textures photo real rendered with mental ray