Thingiverse
Z-axis floating-nut-arrester by Bophoto
by Thingiverse
Last crawled date: 3 years, 1 month ago
Inspired by TwoTimes awesome wobble arrester,
http://www.thingiverse.com/thing:2151
You will need to purchase the vertical rails and bushings listed in the wobble arrester materials list.
The design captures the Z-axis nut, have a smooth base which can slide smoothly under the acrylic and have a vertical pin to prevent rotation. it is all very simple and makes a huge difference in the smoothness of your prints because it removes the wobble from the rotating z-shafts.
I also printed a simple triangle to capture the z-rails, but the ones in the wobble arrester is far cooler.
http://www.thingiverse.com/thing:2151
You will need to purchase the vertical rails and bushings listed in the wobble arrester materials list.
The design captures the Z-axis nut, have a smooth base which can slide smoothly under the acrylic and have a vertical pin to prevent rotation. it is all very simple and makes a huge difference in the smoothness of your prints because it removes the wobble from the rotating z-shafts.
I also printed a simple triangle to capture the z-rails, but the ones in the wobble arrester is far cooler.
Similar models
thingiverse
free
Z-Wobble Thingie by juniortan
...tp://www.thingiverse.com/thing:3052
i didn't have a 7mm pin, but i have plenty of 1mm brass rods; hence this simple variation
thingiverse
free
Z-Wobble without pin by MakiYoshida
... model was based on juniortan\'s.
i didn\'t have even 1mm brass rods, so i made more simple variation - without any rods.
thingiverse
free
Wobble Arrester - modified vertical plate clamp by gpvillamil
...e z-stage properly. so i modified the plate clamp to be a bit deeper, now it matches the thickness of the z-stage almost exactly.
thingiverse
free
Anet A8 Anti Z Wobble (Parametric Design) by nicolaferrara82
...bject at the bottom of the z-axis arm on both sides as shown in the picture.
have fun
https://www.youtube.com/watch?v=1zgwqm_v-9i
thingiverse
free
K8200 z anti z-axis wobble
...ts and 3 regular nuts.
requires a linear bearing to work.
all holes are slightly oversized to compensate for printer inaccuracies
thingiverse
free
Printrbot Simple Z Axis tie Bar (Stabilize Z Axis on tall Bots) by orangefurball
...imply print and install.
there is also a longer version. if you have the extra bar space available i would recommend this one.
thingiverse
free
Flexible Shaft Coupler by woodencase01
... easy to print and simple. it should improve the z axis wobbling problem.
hardware required:
2 m3 nuts
2 m3 set screw
2 m8 nuts
thingiverse
free
Prusa Z Screw Isolator by DaleDunn
...he nozzle. the z axis nut iss captured in a bracket that is not rigidly coupled to the x end brackets as with the regular prusa.
thingiverse
free
Velleman K8200 Anti Z Wobble Nut by ruediste
...ding in my prints and a wobbling z axis threaded rod. so i thought i add an anti wobble nut. didn't solve the issue though...
thingiverse
free
z-axis top stabilizer by gjallarhorn
...the print and noticed that there was a significant wobble within the z-axis rods. since installation prints have gone very smooth
Bophoto
thingiverse
free
Lenshood for Sanyo HD1 by Bophoto
...yo hd1 by bophoto
thingiverse
lasercut project for a small lens-hood for the sanyo hd1 and hd2. it is pressure fit on the lens.
thingiverse
free
Lenshood for Leica D-lux4 and panasonic LX3 by Bophoto
...a d-lux4 and panasonic lx3 by bophoto
thingiverse
this is a simple pressure fit lenshood for the leica d-lux4 and panasonic lx3.
thingiverse
free
DJI MavicPro - Nvidia SHIELD clip rev1 by Bophoto
... hold my nvidia shield k1 tablet with the mavicpro controller. works fine, but i would probably make the clips wider on next run.
thingiverse
free
LG HU80KA vertical wall mount by Bophoto
...just using a level when drilling and hanging did the trick for me.
have fun, post a picture if you print and hang a projector :-)
thingiverse
free
NVIDIA MOUNT CLIPS by Vonjet
...these are extended versions of the clip designed by bophoto they hold the nvidia shield to the mavic...
thingiverse
free
Z-Wobble Thingie by juniortan
...to): wobble arrester by twotimes: http://www.thingiverse.com/thing:2151 z-axis floating-nut-arrester by bophoto http://www.thingiverse.com/thing:3052 i didn't have a 7mm pin, but i...
thingiverse
free
Production-side Decoupled Z-stage by pandelume
...note: this is derivative of the cupcake (gnu gpl), bophoto#39;s work (pd), and twotimes' work (gnu lgpl), so i'm...
thingiverse
free
Z-Wobble without pin by MakiYoshida
...to): wobble arrester by twotimes: http://www.thingiverse.com/thing:2151 z-axis floating-nut-arrester by bophoto http://www.thingiverse.com/thing:3052 z-wobble thingie by juniortan: http://www.thingiverse.com/thing:3079 this model was...
thingiverse
free
Filament Usage Gauges by pandelume
...mirrored files just in case. edited to add: per bophoto#39;s suggestion, i've recalculated these for a 1mm solid shell...
Arrester
turbosquid
$10
PACA Arrest Shield
... free 3d model paca arrest shield for download as obj and fbx on turbosquid: 3d models for games, architecture, videos. (1494065)
turbosquid
$45
Surge Arrester / Bushing / Insulator High Voltage
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3ddd
free
Сетевой фильтр APC Surge Arrest PH6VT3
...сетевой фильтр apc surge arrest ph6vt3
3ddd
сетевой фильтр
размеры (ширина x высота x глубина) 122 x305 x42 мм
3d_ocean
$8
HANDCUFFS
...est cop hand handcuffs police
3d realistic model of cop’s handcuffs all used materials are included files 3ds/obj/fbx/dwg/dxf/skp
3d_export
$60
lockheed martin f-35 c lightning ii
...s. the larger wing area allows for decreased landing speed while increasing both range and payload. the f-35c is limited to 7.5 g
3ddd
$1
Toulouse Chandelier Curreycodealers
...m rings that hang from slender linked chains. a proper blacksmith finish completes the restrained look of this exceptional style.
3ddd
$1
Blainey North Hercule Dining Chair
...with the leather chair. sit back and let the hercule take you for the ride of your life.
dimensions:
h 97cm | w 65cm | d 68.5cm
3d_export
$20
saesee tin
...d for ease of scene management.<br>model is centered in 3d space, each part are arranged in heirarchy and parented objects.
3d_export
$110
uss midway cv-41 carrier
...odifications necessary to correct the problem. this model show the last figure of this sea beast. the f-18 are included on files.
3dfindit
free
Surge Arresters modular
...surge arresters modular
3dfind.it
catalog: eti
Floating
3ddd
$1
float
...float
3ddd
молдинг
float modeling 3dsmax and vray
design_connected
$20
Float
...float
designconnected
design mobel float computer generated 3d model. designed by trubridge, david.
design_connected
$20
Float
...float
designconnected
paola lenti float computer generated 3d model. designed by rota, francesco.
3ddd
$1
ArmChair4 - Float
...armchair4 - float
3ddd
sillon , float
armchair, sillon, float
3d_export
$12
Float book
...float book
3dexport
float book
3d_export
free
floating island
...floating island
3dexport
a lowpoly floating island...
3ddd
free
Floating Sofa
...floating sofa
3ddd
philippe nigro
floating sofa
design philippe nigro
3d_export
free
floating seat
...floating seat
3dexport
you'll enjoy your day in this floating seat
design_connected
$25
Floating Sofa
...floating sofa
designconnected
comforty floating sofa computer generated 3d model. designed by nigro, philippe.
archive3d
free
Float 3D Model
...loat 3d model
archive3d
swimming mattress float
float - 3d model for interior 3d visualization.
Axis
3ddd
$1
Мария Axis
...
3ddd
кухня , классическая , axis
модель кухни.
3d_export
$22
Axis robot 6-axis robotic arm
...ing parts drawings, standard parts purchased parts list, can be produced directly according to the drawings, welcome to download!
3ddd
free
Versatile Axis
...ddd
nexus , плитка
http://bvtileandstone.com/ceramic-porcelain/versatile-axis/
3d_export
$19
robot 2 axis
...robot 2 axis
3dexport
robot 2 axis
turbosquid
$40
Axis R5F
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$40
Axis S5F
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$30
Axis Athlon
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$10
Linear Axis
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_export
$15
drawing axis
...drawing axis
3dexport
simple rendering of the scene file
3ddd
$1
versatile axis ARC
...versatile axis arc
3ddd
versatile , плитка
versatile axis arc red dot design award
Z
3d_export
$5
nissan z
...nissan z
3dexport
nissan z
3ddd
$1
Vase Z
...vase z
3ddd
vase z
3ddd
$1
полотенцесушить Z
...полотенцесушить z
3ddd
полотенцесушитель
полотенцесушить z
design_connected
free
Z-Chair
...z-chair
designconnected
free 3d model of z-chair designed by karman, aleksei.
design_connected
$11
Z Lamp
...z lamp
designconnected
phillips z lamp computer generated 3d model. designed by kalff, louis.
3d_export
$5
Dragon balls z
...dragon balls z
3dexport
dragon ball z
turbosquid
$20
Fighter Z
...
turbosquid
royalty free 3d model fighter z for download as on turbosquid: 3d models for games, architecture, videos. (1292563)
turbosquid
$9
Pen Z
...pen z
turbosquid
free 3d model pen z for download as obj on turbosquid: 3d models for games, architecture, videos. (1686775)
turbosquid
free
z chair
...z chair
turbosquid
free 3d model z chair for download as max on turbosquid: 3d models for games, architecture, videos. (1410230)
turbosquid
$5
Letter Z
...urbosquid
royalty free 3d model letter z for download as max on turbosquid: 3d models for games, architecture, videos. (1408540)
Nut
3d_export
free
nut
...nut
3dexport
low poly
turbosquid
$13
Nut
...
royalty free 3d model nut for download as max, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1227126)
turbosquid
$12
nut
...
royalty free 3d model nut for download as max, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1175191)
3d_export
$5
nut handle
...nut handle
3dexport
nut handle
3d_export
$5
nut anchor
...nut anchor
3dexport
nut anchor
3d_export
$5
wing nut
...wing nut
3dexport
wing nut
3d_export
$5
butterfly nut
...butterfly nut
3dexport
butterfly nut
3d_export
$5
special nut
...special nut
3dexport
special nut
3d_export
$5
nut hook
...nut hook
3dexport
nut hook
3d_export
$5
nut ring
...nut ring
3dexport
nut ring