x185s by windrides

...hair band by sry3091 thingiverse made with pla infill 30 %

...hook for backpack by mcvillacorta thingiverse pla 0.2 infill 30% sin soportes

...dacia keychain by kayhanbsrn thingiverse dacia keychain %30 infill pla 230c

...window holder by danilogrillo thingiverse printed with pla, 0,3 resolution and 30% infill.

...s: 4", 3" motors: 1407 or 1306 fc mount: 30-30.5mm weight: 25grams (x4, pla, 30% infill), 22grams (x3, pla, 30% infill)

...martian ii caddx ratel backplate by buglish thingiverse printed in pla at 30% infill.

...cz 75 by harry68 thingiverse cz 75 shadow keyring, infill 30 %, pla

...sig sauer keyring by harry68 thingiverse sig sauer keyring, infill 30, pla ,

...microsoft lifecam hd3000 tripod mount by fermunoz thingiverse pla 0.2mm, 30%infill.

...: 10 infill: 30% t-slot nut w/ fan mount: layer: 0.1 mm filament: pla perimeters: 10 top layers: 10 bottom layers: 10 infill: 30%

...r i added the .stp file if some of you want to remix it or export the dxf of the bottom plate real pictures will be added soon...

...camera turret by windrides thingiverse fpv camera turret for x185s quadcopter suitable cameras:http://www.banggood.com/600tvl-8_0mp-14-2_8mm-cmos-fpv-170-degree-wide-anlge-lens-camera-palntsc-p-984345.html orhttp://www.hobbyking.com/hobbyking/store/__97551__diatone_600tvl_120deg_miniature_camera_black_.html base mount: 30mm - 30.5mm...

... g1 y50 f3000 ; move out of the way of wiper g;; 1 x10 y10 f3000; back to 'near' front left g92 e0; zero extruder ; *****

...ing architecture retail commercial business storefront curtainwall mall exterior commercial building office building retail store

...basin 3dwarehouse 615 x 420 x185

...windrider - eldar jetbike - tm thingiverse windrider - eldar jetbike - tm

...m3 round spacers by windrides thingiverse m3 round spacers inner diameter: 3mm outer diameter: 6mm length: 2mm to 50mm

...eli_s fc mount: 30-30.5mm battery: 850-1000mah 3s-4s weight: 33.2 grams (30% infill, pla) print time: 2 hours 10 minutes @ 60mm/s

...es08mdii 12g metal gear tail screw: m3 33mm and m3 nyloc nut battery: 850-1000mah 3s-4s frame weight: 58 grams (100% infill, pla)

...infill) you will also need 5x m3x8mm screws for base plates. *** x195t-top.stl should be printed with 5 perimeters or 70%+ infill

...0 3d by windrides thingiverse main gear for blade 450 3d rc helicopter update: reduced gear diameter by 0.5mm and test flown it,

...runcam 2 fpv mount 20-45 by windrides thingiverse runcam 2 fpv mount angles: 20, 30, 40, 45 weight: 15-17grams

...s: 4", 3" motors: 1407 or 1306 fc mount: 30-30.5mm weight: 25grams (x4, pla, 30% infill), 22grams (x3, pla, 30% infill)

...hingiverse gopro (4 and 5) session fpv mount v2 angles: 0, 15, 20, 25, 30, 35, 40, 45 weight: 10 - 12.5 grams (pla, 100% infill)