Thingiverse
X-ends for holding 20x20 extrusion 3 hole delrin/lm8uus by Simonious
by Thingiverse
Last crawled date: 3 years ago
x-ends compatible with the 3-hole delrin lead-screw nuts.
These x-ends don't hold x-rods, they hold a single 20x20 extrusion.
both ends have an integrated bolt holder meant to interface with a z-endstop held in the lower part from http://www.thingiverse.com/thing:28425
By the way these are intended for 605zz idler bearings, you'll have to enlarge the hole either before or after printing if you intend to use 608zzs.
These x-ends don't hold x-rods, they hold a single 20x20 extrusion.
both ends have an integrated bolt holder meant to interface with a z-endstop held in the lower part from http://www.thingiverse.com/thing:28425
By the way these are intended for 605zz idler bearings, you'll have to enlarge the hole either before or after printing if you intend to use 608zzs.
Similar models
thingiverse
free
X-ends for holding 20x20 extrusion 3 hole delrin/lm8uus for lm10uus by Simonious
...tended for 605zz idler bearings, you'll have to enlarge the hole either before or after printing if you intend to use 608zzs.
thingiverse
free
X-ends for holding 20x20 extrusion 3 hole delrin nuts/lm8uus by Simonious
...tended for 605zz idler bearings, you'll have to enlarge the hole either before or after printing if you intend to use 608zzs.
thingiverse
free
X-ends for holding 20x20 extrusion 3 hole delrin nuts/bushings by Simonious
...tended for 605zz idler bearings, you'll have to enlarge the hole either before or after printing if you intend to use 608zzs.
thingiverse
free
X-ends for holding 20x20 extrusion 2 hole delrin / lm8uus by Simonious
...ore or after printing if you intend to use 608zzs.
if you need a bushing version look here http://www.thingiverse.com/thing:34487
thingiverse
free
T-slot x ends, compatible with Trinity Labs 4 Hole 2 Mount Delrin Nut Leadscrews by Hewball
...of 605zz bearings for the idler. you'll have to enlarge the hole either before or after printing if you intend to use 608zzs.
thingiverse
free
X-ends for holding 20x20 extrusion nuts/lm8uus by Simonious
...z-nut with spring pair - should fit m8 or similar i'm using it on acme 1/4" rods in the...
thingiverse
free
T-slot x ends, compatible with both nut types by Simonious
...tended for 605zz idler bearings, you'll have to enlarge the hole either before or after printing if you intend to use 608zzs.
thingiverse
free
X-ends for holding 20x20 extrusion bushings/nuts by Simonious
...z-nut with spring pair - should fit m8 or similar i'm using it on acme 1/4" rods in the...
thingiverse
free
X-ends for holding 20x20 extrusion nuts/lm10uus by MishaT
...rse.com/thing:29484#
only things i changed was enlarge the idler hole to fit 608zzs and enlarged the bearing holders for lm10uus.
3dwarehouse
free
Delrin lead screw nut
...delrin lead screw nut
3dwarehouse
delrin nut for 3/8' lead screw 1.5' x 1' x .75' with 4 3/16' holes
Simonious
3ddd
$1
BILLARD TOULET
...кно высшего качества - iwan simonis.
27 цветов на выбор.
размер стола от 8 футов.
цвет материалов регулируется в diffuse color.
3d_export
$16
michelangelo bust
...mat: obj, max8,fbx,stl<br>the model is print ready. size : 4,8 x 6,5 x 12,0 cm<br>the model is rescalable as you need
thingiverse
free
Belt Mount by Simonious
...belt mount by simonious
thingiverse
zip tie belt tie down for rail.
thingiverse
free
Bed Corner by Simonious
...bed corner by simonious
thingiverse
used to mount the glass print bed to the sub bed.
thingiverse
free
Chainsaw (necklace?) by Simonious
...chainsaw (necklace?) by simonious
thingiverse
this is a little chainsaw - it doesn't actually work.
thingiverse
free
Filament guide for MendelMax by Simonious
...filament guide for mendelmax by simonious
thingiverse
filament guide for mendelmax
thingiverse
free
X-axis carriage by Simonious
...x-axis carriage by simonious
thingiverse
this car is meant to be machined in aluminum.
thingiverse
free
fan for extruder by Simonious
...fan for extruder by simonious
thingiverse
just a little aimable fan and nozzle for your extruder - also acts as a belt tie down.
thingiverse
free
Fan Models by Simonious
...fan models by simonious
thingiverse
fan models, i sometimes use these when working on a model, you may find them useful too.
thingiverse
free
GT2 pulleys by Simonious
...gt2 pulleys by simonious
thingiverse
these are untested gt2 pulleys, both have 17 teeth.
please report back if you try them out.
Delrin
thingiverse
free
folgertech kossel 2020 delrin bearing slider (wider delrin) by deltadodge
...in bearing slider (wider delrin) by deltadodge
thingiverse
made carriage slider wider to accomidate wider delrin bearing v wheel
thingiverse
free
Carriage_v3_V-Wheel Delrin by allen_g30
...r v-wheel delrin http://makerstore.cc/product/dual-v-wheel-kit-delrin/
thanks laurman (https://www.thingiverse.com/laurman/about)
thingiverse
free
Replicator Delrin Plunger Replacement by rkelley
...replicator delrin plunger replacement by rkelley
thingiverse
fits the mk7 and mk8 stepstruders.
thingiverse
free
Delrin Roller Spacer for Kossel XL 2020 extrusion by electronhacks
... xl 2020 extrusion by electronhacks
thingiverse
spacer for delrin roller for kossel xl 2020 movement. hole is for m5 screw size.
thingiverse
free
Delrin Nut Adapter for Printrbot Smalls by ES0602
...nge on the delrin nut a little so it would fit in the space available on the smalls.
this fix solved my horizontal banding issue.
thingiverse
free
Variable Delrin Wheel Spool Holder by KauaiMaker
...ol.
additional materials required:
4x delrin v-wheels with bearings (mine were from a tevo tarantula)
4x m5*25 screws
4x m5 nuts
thingiverse
free
Delrin Plunger Replacement for Replicator 2 MK8 Extruder by FunbieStudios
...pgrade to arrive, we designed and printed out a replacement head for it. it still makes use of the stock screw and rubber o-ring.
thingiverse
free
Delrin bearubg 15mm od 8mm id by markfruhauf
...y own with delrin. i have 6 x 8mm liner stainless rods so it gets costly to purchase 3 sets of high quality 49mm x 8 mm bearings
thingiverse
free
Scalar - Idler fork for Delrin Idler by 3DModularSystems
...ww.3dmodularsystems.com
twitter: https://twitter.com/3dmodularsystem
youtube: http://www.youtube.com/c/3dmodularsystems3dprinters
thingiverse
free
Spacer for Delrin V-wheels by peridot_faceted
...he nuts on either side; the inner races then bind firmly between the nuts and spacers, while the outer races still roll smoothly.
Lm8Uus
thingiverse
free
Lm8uu Bearing
...lm8uu bearing
thingiverse
lm8uu bearing
thingiverse
free
2020 lm8uu
...2020 lm8uu
thingiverse
lm8uu 2020 bosch
thingiverse
free
LM8UU spiral & LM8UU linear by Dmawzx
...lm8uu spiral & lm8uu linear by dmawzx
thingiverse
replace lm8uu linear ball bearing type.
size: 8x15x24 mm
thingiverse
free
LM8UU by Emyx74
...lm8uu by emyx74
thingiverse
printable linear beating lm8uu
thingiverse
free
lm8uu holder
...lm8uu holder
thingiverse
simple holder for lm8uu
screw hole distance is 38mm
thingiverse
free
Printed LM8UU by peke
...printed lm8uu by peke
thingiverse
a spare lm8uu
thingiverse
free
LM8UU holder by Modellaner
...lm8uu holder by modellaner
thingiverse
another lm8uu holder.
thingiverse
free
Adapter LM12UU to LM8UU
...adapter lm12uu to lm8uu
thingiverse
adapter lm12uu to lm8uu
thingiverse
free
lm8uu holder by yusuf_uzun
...lm8uu holder by yusuf_uzun
thingiverse
lm8uu holder for 3d printer
thingiverse
free
LM8UU Small by haldemir55
...lm8uu small by haldemir55
thingiverse
small size lm8uu support
20X20
turbosquid
$4
20X20
...royalty free 3d model 20x20 for download as max, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1311637)
3d_export
$8
exhibition booth 20x20 octanorm system
...aterials are decorated in the same style as the real exhibits<br>the sketch has a public big booth and nine small companies
3ddd
$1
KUTAHYA SERAMIK CROSS, STAR, HANEDAN
...размером 13080mm x 13080mm с библиотекой материалов .mat: cross, 20x20matt hanedan, 20x20_matt star bone, 20x20_matt star brown, 20x20_matt _____________________________________...
3ddd
free
Bisazza
...bisazza 3ddd bisazza , мозаика bisazza colors gemme 20x20 архив содержит 20 текстур плитки в формате jpg. cайт...
3ddd
$1
DECOR MEDIEVO 20*20 MIX
...20*20 mix коллекция: bolonia фабрика: mainzu страна: испания размер: 20x20 см...
3ddd
$1
Ape Giorno Decor mix TREVISO
...treviso , плитка плитка ape giorno decor mix treviso, 20x20 стек открыт. текстуры - есть порезанные на отдельные плитки,...
3ddd
$1
KUTAHYA SERAMIK ANTIACID
...12840mm с библиотекой материалов .mat: kutahya seramik antiacid bone, 20x20matt kutahya seramik antiacid sand, 20x20_matt _____________________________________ 3dsmax 2014, 2011....
3ddd
free
Ceramica Bardelli (Fornasettiana)
...белом глянцевом (bianco extra) и матовом (l.111) фоне формата 20x20 см. рекомендуемые артикулы одноцветной фоновой плитки: bianco extra, l.111,...
3d_export
$9
Set of plugs
...games, videos, 3d printing and more.<br>set plugs:<br>1. square plug 30x30-20x20lt;br>2. square plug 40x40-30x30<br>3. square plug 50x50-40x40<br>4. square plug 60x60-40x40<br>5....
thingiverse
free
20x20 Damper / 20x20 Aluminiumprofil Dämpfer by JMDesigns
...20x20 damper / 20x20 aluminiumprofil dämpfer by jmdesigns
thingiverse
20x20 damper / 20x20 aluminiumprofil dämpfer
Extrusion
turbosquid
free
aluminum extrusion profiles
...free 3d model aluminum extrusion profiles for download as max on turbosquid: 3d models for games, architecture, videos. (1381707)
turbosquid
$5
Cable Cover Extrusion
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_export
free
30 x 30 extrusion
... x 30 x 40.sldprt<br>30 x 30 x 50.sldprt<br>30 x 30 x 606.sldprt<br>the sketch.sldprt<br>30 x 30 x 40.stl
3d_export
$300
melt-blown fabric extrusion molding machine
...an email to me.<br>designed with solidworks 2017, render with photoview 360<br>**************************************
3d_export
$5
Spaceship - Galaxy Crusher
...with a more ominous twist. it has lots of extrusion and cubes and comes with a whopping 4k texture,...
3d_export
$20
1600 Meltblown cloth production line set drawing CAD
...width of 1600mm. the steel structure frame, feeding host, extrusion screw, heating system, screen changer, metering pump, melting it...
3d_export
$5
one-eyed scary virus
...cinema, the body relief is formed by the standard extrusion noise. the eye texture is...
3d_export
$20
GE TF34 Fan Blade and Nose Cone
...and appropriately sized fillet features are provided.<br>also, a threaded extrusion profile is provided on the fan blade component and...
3d_export
$10
glue injection machine
...injection technology. the ordinary glue injection machine is screw extrusion type, and its instantaneous pressure can reach more than...
3d_export
$1000
bead triangle adhesive laminating machine
...a triangular rubber head with the shape required for extrusion the rear end of the extruder is also provided...
Ends
archibase_planet
free
Cigarettes end
...d
archibase planet
cigarettes end cigarette stub cigar-butt
cigarette-end - 3d model (*.gsm+*.3ds) for interior 3d visualization.
3d_export
$5
end table
...end table
3dexport
end table 3d model dimensions:(w)60cm×(d)60cm×(h)56cm
3d_export
$5
end table
...end table
3dexport
end table 3d model dimensions:(w)60cm×(d)60cm×(h)56cm
turbosquid
$10
End Table
...rbosquid
royalty free 3d model end table for download as max on turbosquid: 3d models for games, architecture, videos. (1570610)
turbosquid
$5
End Table
...urbosquid
royalty free 3d model end table for download as ma on turbosquid: 3d models for games, architecture, videos. (1622809)
turbosquid
$3
End Table
...rbosquid
royalty free 3d model end table for download as fbx on turbosquid: 3d models for games, architecture, videos. (1315115)
3d_export
$5
rope end ring
...rope end ring
3dexport
rope end ring
turbosquid
$2
End Tables
...
royalty free 3d model end tables for download as max and obj on turbosquid: 3d models for games, architecture, videos. (1706896)
turbosquid
$14
End Table
...lty free 3d model end table for download as max, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1403051)
turbosquid
$12
End Table
...lty free 3d model end table for download as max, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1574707)
Holding
turbosquid
$15
Holds
...royalty free 3d model holds for download as max, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1479462)
archive3d
free
Hold 3D Model
...ld 3d model
archive3d
hold include enclose
hold k0029 - 3d model for interior 3d visualization.
turbosquid
$19
Brown curtains in the hold
...lty free 3d model brown curtains in the hold for download as on turbosquid: 3d models for games, architecture, videos. (1617521)
3ddd
$1
Holds for indoor and outdoor climbing
...holds for indoor and outdoor climbing
3ddd
holds for indoor and outdoor climbing
3d_export
free
men holding a stone
...men holding a stone
3dexport
turbosquid
$1
Hold-down Assembly
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$12
Dragon Holding Sphere
...lding sphere for download as ma, dae, fbx, gltf, obj, and stl on turbosquid: 3d models for games, architecture, videos. (1554881)
3ddd
$1
Art.com-HOLD ON TIGH
...art.com-hold on tigh
3ddd
michael mullan
framed art print michael mullan
3ddd
$1
iNeo sofa- Bold Hold collection
... collection
ineo sofa bold hold. original chair designed by mostafa jamaluddin www.i.n.e.o.com
3ddd
$1
iNeo table- Bold Hold collection
... collection
ineo table bold hold. original chair designed by mostafa jamaluddin www.i.n.e.o.com
Hole
design_connected
$9
Hole
...hole
designconnected
zeritalia hole shelves and storage computer generated 3d model. designed by derin design.
3ddd
$1
Magic hole
...magic hole
3ddd
magic
дизайнерское кресло magic hole
3d_export
free
black hole
...black hole
3dexport
3d rendering black hole in blender 2.9
3ddd
$1
Magic Hole
...magic hole
3ddd
philippe starck
magic hole - дизайн philippe starck (2010)
turbosquid
$4
Black Hole
...squid
royalty free 3d model black hole for download as blend on turbosquid: 3d models for games, architecture, videos. (1606724)
turbosquid
$5
security hole
...yalty free 3d model security hole for download as 3dm and max on turbosquid: 3d models for games, architecture, videos. (1669645)
turbosquid
$32
hole punch
... 3d model hole punch for download as 3ds, obj, fbx, and blend on turbosquid: 3d models for games, architecture, videos. (1230702)
3d_export
$10
Black hole
...black hole
3dexport
a minimalist representation of a singularity
turbosquid
$50
Worm Hole
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$30
15 Hole
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3
turbosquid
$10
Mountain Bike 3 -3 of 3
...model mountain bike 3 (#3 of 3) for download as fbx and blend on turbosquid: 3d models for games, architecture, videos. (1438752)
turbosquid
$6
Rock 3-3
...urbosquid
royalty free 3d model rock 3-3 for download as obj on turbosquid: 3d models for games, architecture, videos. (1628065)
turbosquid
$29
Books 150 pieces 3-3-3
...books 150 pieces 3-3-3 for download as max, obj, fbx, and stl on turbosquid: 3d models for games, architecture, videos. (1384033)
turbosquid
$3
Genesis 3 Clothing 3
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_export
$5
hinge 3
...hinge 3
3dexport
hinge 3
3ddd
$1
Розетка 3
...розетка 3
3ddd
розетка
розетка 3
turbosquid
$50
is-3
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$10
Mountain Bike 3 -2 of 3
...model mountain bike 3 (#2 of 3) for download as fbx and blend on turbosquid: 3d models for games, architecture, videos. (1438750)
turbosquid
$10
Mountain Bike 1 -3 of 3
...model mountain bike 1 (#3 of 3) for download as fbx and blend on turbosquid: 3d models for games, architecture, videos. (1438743)
3d_export
$5
3 CATS
...3 cats
3dexport
3 cats pen holder