Thingiverse
X-Carve Dust Collection Boot V3 by GingerBrandon
by Thingiverse
Last crawled date: 3 years ago
This is my third version of a dust shoe for my X-Carve CNC.
The first one was aimed at a using a shop vac, which was too loud, and the second one was aimed at using 4" Dust Collection hose, but I had issues with the arms breaking, and it just seemed too big.
The actual shoe is my design that aims to optimize airflow to pull right from the area the bit is ejecting chips. It is also designed to use any bristles you have on hand, glued in with hot glue.
I used the top connector of the "New Brit" design and the arms of ronnfolks' design.
I added a quick version with a 2.5in port for regular vacuum hose in case someone wanted to try that.
I made the port to accept 4" hose end, but then I used a quick release 4" end so it could be quickly detached to get whatever dust is missed, thus making the ports end higher then it needed to be. Ive include a shorter shoe, should that be preferred.
I added a knob I designed to work with an M5 Bolt.
If your brave enough to drill holes in your gantry Ive made a V4 at
www.thingiverse.com/thing:3896165
Follow my antics at www.brandonhilder.com
The first one was aimed at a using a shop vac, which was too loud, and the second one was aimed at using 4" Dust Collection hose, but I had issues with the arms breaking, and it just seemed too big.
The actual shoe is my design that aims to optimize airflow to pull right from the area the bit is ejecting chips. It is also designed to use any bristles you have on hand, glued in with hot glue.
I used the top connector of the "New Brit" design and the arms of ronnfolks' design.
I added a quick version with a 2.5in port for regular vacuum hose in case someone wanted to try that.
I made the port to accept 4" hose end, but then I used a quick release 4" end so it could be quickly detached to get whatever dust is missed, thus making the ports end higher then it needed to be. Ive include a shorter shoe, should that be preferred.
I added a knob I designed to work with an M5 Bolt.
If your brave enough to drill holes in your gantry Ive made a V4 at
www.thingiverse.com/thing:3896165
Follow my antics at www.brandonhilder.com
Similar models
thingiverse
free
X-Carve Dust Collection Hose Adapter, 4in-2.5in by mstrperson
...es' dust shoe!
printed in filaflex for the supple connections! top is ribbed to hold into the 4 inch hose with a hose clamp.
thingiverse
free
4" Dust Port-Hose Adaptor by 3dtandar
...ose and the other has a 4" id for a friction fit onto a 4" dust port.
new version incorporates a more aggressive thread
thingiverse
free
4" Rockler Dust Right Hose Connector by ignisuti
...lly for my rockler dust right system.
will be connecting to a storage tote as my dust collection bin and adding pictures shortly.
thingiverse
free
X-Carve Dust Shoe Replacement Insert
...tic posted by x-carve. dxf given so you can cut it with laser or cnc. stl given if you want to 3d print one "un-tested"
thingiverse
free
Dust Collection 4in PVC to 4" Flex Hose Threaded
...d for this connection.
check out my other dust collection parts.https://www.thingiverse.com/boulwarek/collections/dust-collection
thingiverse
free
Shop Vac 4" hose adapter by TucksProjects
...de for my rigid shop vac (2.5") to connect to my saw stop (4") dust collection port.
items needed: 4-5" hose clamp
thingiverse
free
Y Splitter for Bosch Router Table Dust Collection by kwixson
...ection hose.
there is a basic base y solid model with uniform ports and then adapters for different hoses to fit into the y base.
thingiverse
free
Glowforge 4" threaded exhaust hose adapter
...but good to my glowforge, you might have have to adjust your horizontal expansion a bit to get the perfect fit from your printer.
thingiverse
free
X Carve 4" Dust Boot by GingerBrandon
...hilder.com/cnc/x-carve/x-carve-upgrades
edit 06-06-18
ive made a much better model here:https://www.thingiverse.com/thing:2960642
thingiverse
free
1.25" ShopVac Adapter for Ryobi Compound Miter Saw
...the hose, and just has the corrugated hose. this part is designed to fit inside the hose and on the outside of the saw dust port.
Gingerbrandon
thingiverse
free
Pegboard System by GingerBrandon
...pegboard stuff i thought someone might like...
i used these hooks in conjunction with ithttps://www.thingiverse.com/thing:4681959
thingiverse
free
2X4 alignment jigs by GingerBrandon
... alignment jigs by gingerbrandon
thingiverse
i made a bunch of tools to align screw holes on 2x4s for a workshop table im making
thingiverse
free
2X4 alignment jigs by GingerBrandon
...nt jigs by gingerbrandon
thingiverse
i wanted a way to cut all holes for a table i'm making for the shop in a consistent way
thingiverse
free
Shop Floor Sweep by GingerBrandon
...iverse
i needed an adapter for 4" pvc to a sweep for the shop, and this was faster then ordering one and fit better anyway!
thingiverse
free
Dewalt Bit Extension hanger by GingerBrandon
...dewalt bit extension hanger by gingerbrandon
thingiverse
i made this to hang the cool bit extension wands:
dw1589
dw1588
thingiverse
free
CNC clamps, guides and hold downs by GingerBrandon
...cnc clamps, guides and hold downs by gingerbrandon
thingiverse
this is a collection of clamps and guides ive made for my cnc
thingiverse
free
Hex Bit Holder Wall Mount by GingerBrandon
...hex bit holder wall mount by gingerbrandon
thingiverse
i wanted a place to mount my favorite dewalt countersink hex shank bits
thingiverse
free
Delta Planer Belt Cover by GingerBrandon
...on
thingiverse
melted my belt cover, and they don't sell them anymore, so i made a version that works.
hope it helps someone
thingiverse
free
LED Strip lens by GingerBrandon
...ss rugged.
i added a couple that can be used with non-transparent filament, but you have to make sure your leds are 16.5mm apart.
thingiverse
free
Outdoor Door Sensor Box by GingerBrandon
...te, so this is what i came up with. the magnet holder has a 40x40mm hole for a trapped magnet inside
http://bit.ly/tuyadoorsensor
Boot
thingiverse
free
mercedes Boot
...mercedes boot
thingiverse
boot
thingiverse
free
BOOTS by TimHaines
...boots by timhaines
thingiverse
boots!
thingiverse
free
Minecraft Steve Boots Armor Boot by eddie2799
...minecraft steve boots armor boot by eddie2799
thingiverse
minecraft steve boots armor boot
thingiverse
free
boot by andr56338
...boot by andr56338
thingiverse
ski boots
thingiverse
free
Boot Heel by romiusgod
...boot heel by romiusgod
thingiverse
boot heel, for 4 pin boots
thingiverse
free
boot by ali222
...boot by ali222
thingiverse
this is a boot that i made. you can use this for figures, dolls and more.
thingiverse
free
Boot Knife by danielferal
...boot knife by danielferal
thingiverse
boot knife
thingiverse
free
Boot by mocapca
...ged).
http://data.mocap.ca/
check out clubclay's printable version of this boot:
http://www.thingiverse.com/thing:94470
thingiverse
free
boot by TheBigTricky
...boot by thebigtricky
thingiverse
thingiverse
free
Rain Boot by mrhers2
...rain boot by mrhers2
thingiverse
rain boot that is 2.5 cm tall
Carve
thingiverse
free
Carved Capital
...carved capital
thingiverse
replacement of faulty wooden carved capital.
thingiverse
free
Wood Carving by baltimorehacker
...wood carving by baltimorehacker
thingiverse
grandfathers carving.
thingiverse
free
Carving skull by kai6661305
...carving skull by kai6661305
thingiverse
carving skull
thingiverse
free
Carving Acrylic by MENA
...carving acrylic by mena
thingiverse
alpha mena carving acrylic product
thingiverse
free
wood carving by alfredkim74
...wood carving by alfredkim74
thingiverse
deign of wood carving pedal powered machine
thingiverse
free
Carved by MrAhmama
...carved by mrahmama
thingiverse
pretty stuff.
thingiverse
free
Carved rock. by solomondg
...carved rock. by solomondg
thingiverse
a carved rock i found at my grandparent's house. scanned with 123d catch.
thingiverse
free
Carving Knife Sheath for Robin Wood Spoon Carving Knife by varngold
...for robin wood spoon carving knife by varngold
thingiverse
protection sheath for razor sharp spoon carving knife from robin wood
thingiverse
free
Skull relief carve by largeformat3dprinter
...skull relief carve by largeformat3dprinter
thingiverse
skull relief carving made in aspire
thingiverse
free
Carving Chisel holder by Gmanicman
...carving chisel holder by gmanicman
thingiverse
blunted carving chisels required a home,
Dust
thingiverse
free
Dust Separator
...dust separator
thingiverse
this is a dust separator similar to the "dust deputy"
thingiverse
free
dust deputy to xcarve dust boot adapter
...e coupler to interface an inventables xcarve dust shoe hose (1.5"id) to an oneida dust deputy cyclone extractor (2"od).
thingiverse
free
DUST HOLDER by frasart
...dust holder by frasart
thingiverse
dust holder
thingiverse
free
DUST NOZZLE by frasart
...dust nozzle by frasart
thingiverse
dust nozzle
thingiverse
free
Dust remover
...l piece of sponge to each part. with the sponges this tool will remove all the dust from your filament and will prevent cloaking.
thingiverse
free
drill dust blower
...drill dust blower
thingiverse
drill dust blower
thingiverse
free
CXP Dust Cap
...cxp dust cap
thingiverse
cxp dust cap
thingiverse
free
Dust Filter by galeev
...dust filter by galeev
thingiverse
simple filament dust filter
thingiverse
free
Dust collector by Rachdie23
...dust collector by rachdie23
thingiverse
a dust collector for my saw
thingiverse
free
Dust Remover by NArdo
...dust remover by nardo
thingiverse
prototype dust remover can
V3
thingiverse
free
Watch v3 by Rasmusskoeld
...watch v3 by rasmusskoeld
thingiverse
watch v3
thingiverse
free
v3 Panel by SpencerR87
...v3 panel by spencerr87
thingiverse
v3 panel
thingiverse
free
Box v3 by robinmorris
...box v3 by robinmorris
thingiverse
box. v3.
thingiverse
free
Minion v3 by bjarkemape
...minion v3 by bjarkemape
thingiverse
minion v3
thingiverse
free
HappyBrush V3 Wallmount
...happybrush v3 wallmount
thingiverse
wallmount for happybrush v3
thingiverse
free
NodeMCU v3 Case
...nodemcu v3 case
thingiverse
its a nodemcu v3 case
thingiverse
free
Jet engine V3
...jet engine v3
thingiverse
jet engine v3 re
thingiverse
free
PLA guider V3
...pla guider v3
thingiverse
updated pla guider v3
thingiverse
free
Pedestal v3 by DanTech
...pedestal v3 by dantech
thingiverse
pedestal v3 - two variants
thingiverse
free
v3 street
...v3 street
thingiverse
for joe
Collection
thingiverse
free
Coaster Collection
...coaster collection
thingiverse
this is a collection of coasters.
thingiverse
free
sonic collection
...sonic collection
thingiverse
sonic collection characters
thingiverse
free
Spellcaster Collection
...spellcaster collection
thingiverse
a collection of various spellcasters in different poses.
thingiverse
free
HRV Collective
...hrv simpit | the left side console | part 1hrv simpit | the left side console | part 2hrv simpit | the left side console | part 3
thingiverse
free
Skeleton collection
...skeleton collection
thingiverse
a collection of skeletons made with desktop hero 2.0
thingiverse
free
Collection of tests
...sts
thingiverse
a collection of tests for:
retraction distance, speed and coasting
single one layer square for flow and diameter
thingiverse
free
Stones collection
...ollection
thingiverse
a collection of random stones. rezise ist to your prefered measures in your slicer or combine it to walls.
thingiverse
free
Doomguy Collectible by danne8_6
...doomguy collectible by danne8_6
thingiverse
doomguy collectible
thingiverse
free
Collection playmobil by bouillant
...collection playmobil by bouillant
thingiverse
collection playmobil
thingiverse
free
Sandbag Collection by onebitpixel
...sandbag collection by onebitpixel
thingiverse
sandbag collection