WPL C24 Toyota Hilux Box Mounted Roll Bar

Last crawled date: 4 years, 2 months ago

Hi guys,
This is a simple mod for your WPL C24 truck to add a box mounted roll bar.
Check out the video intro on YouTube: https://youtu.be/5BFTJZsBse8
Feel free to post some feedback, good or bad. Like and subscribe if you want to see more free stuff.
Print the bars lying flat for strength. I used .15 layers but obviously smaller look nicer. Turn up the flow a bit for extra strength and add an extra 5 degrees to the nozzle temp if your parts seem weak.
The bar joint may need a little massaging with a file or moto tool and the box end has a beefy mounty bit that you can grind off if you don't like it. You'll need some M2 screws (approx 8mm) to put together the bars, or you can try gluing it. I plan to hot glue mine to the box, or maybe use some B-7000 (it's like rubber cement).
As always, use at your own risk.
Wrench to drive or drive to wrench?