WORX Landroid L-Series Cutting Disc. by plutoorjan

Last crawled date: 3 years, 1 month ago

Replacement cutting disc for the larger Worx Landroid L-series, such as the
new version of WG795E and similar with the "Hex"-mount AND the more common FLAT-mount.
It adds in total six knifes and increase the cutting capacity due to the added knifes.
You will see a great improvement in cutting speed, and the cutting capacity will increase with about at least 50%. You need six M4 locking nuts, and three longer M4 screws to assemble it.
To reduce the amount of needed support, I have made an printer
friendly version, where you print the disc in two separate parts.
Printed in PLA with 0.15 Layer and 75% Infill.
Rotate the parts 180° before you print it!
UPDATE 12 June-2018
I have added a updated version of the disc, wich now have a increased size.
The new version V2 is 200mm in diameter and will improve the total capacity further!
I have also included a new "Flat" adapter, so the disc will now fit almost all L-series models!
Both adapters will fit both 190/200mm disc.
When using the "Flat"-adapter, you will need to drill three new holes for the "M4"-mounting screws.
UPDATE Feb 2021
I have added an updated version of the regular 190mm disc, and now have an improved design in some details.
When using the "Flat"-adapter, you will need to drill three new holes
for the "M4"-mounting screws.