Thingiverse
Wooden Barrel Model Kit by PapaGolfDesigns
by Thingiverse
Last crawled date: 3 years ago
Update July 16, 2018: Added a screw on lid option.
Wooden Barrel Model Kit I submitted for the Envision the Future Design Challenge.
This tactile model is a representation of a small wooden barrel approximately 6 by 4.5 inches to help a visually impaired person understand the traditional craft of making barrels, buckets, baths and all forms of storage containers knows as Coopering. The craftsman who makes them is called a cooper.
A barrel, cask, or tun is a hollow cylindrical container, traditionally made of wooden staves bound by wooden or metal hoops and possessing flat ends or heads.
The model was designed in Autodesk® Fusion 360™ and has been adapted in order to support 3D printing. The model is comprise of 16 staves, 2 chime hoops, 2 bilge hoops and 2 sets of heads (3 parts each) so it can be assemble as either a bank or a jar. All the parts are inscribed with braille for easy identification except for the Top Head Ring used for the jar assembly as this part’s surface does not allow for an inscription and the optional storage box.
Due to the variances in tolerance with different 3D Printers, it may not be possible to take the model apart once the hoops have been fully seated in their respective positions. If the model is to be assemble and disassemble repeatedly, then either the x and y scale of the hoops need to be adjusted during the slicing prior to printing or rubber bands can be used instead of the hoops to keep the model firmly assembled.
All the parts can be printed without support except the Bottom Head Plug in order to allow the braille inscription. The chime and bilge hoops can be printed together as the chime hoop fits inside the bilge hoop with enough clearance. The staves are to be printed on their side. All the STLs have the correct orientation and are centred on the bed for printing. A separate set of STLs without braille are also supplied for people who would like to print the model but do not require the inscriptions.
Common parts to be printed:
16 Staves
2 Chime Hoops
2 Bilge Hoops
For the Bank assembly:
1 Top Head with coin slot
1 Bottom Head with treaded hole
1 Bottom Head Plug treaded
For the Jar assembly:
1 Top Head Ring
1 Top Head Lid
1 Bottom Head Full
Optional:
1 Kit Storage Box
1 Kit Storage Box Lid
Assembly
First, select the appropriate set of heads to assemble the kit as either the bank or the jar.
If assembling the bank you will need the top head with coin slot, bottom head with treaded hole and bottom head plug.
If assembling the jar you will need the top head ring, top head lid and bottom head full.
Next, take one stave in one hand and position it with the outside curve against the palm. Insert both heads it their respective slots at the end of the stave. If assembling the jar, the head ring need to be positioned so the recess it facing out to allow the lid to fit properly.
Continue adding stave one by one making sure they are sitting flush with the previous one and apply pressure on the heads so they do not fall off. Once enough staves are in place the heads will stay put.
Once all the staves are in place its time to secure everything by installing the hoops. The Chime hoops go nearest to the head and the bilge hoops go nearest the middle of the barrel. They fit in grooves so the model stays securely assemble. This will fit very tightly and it may not be possible to remove them once they are fully seated. If you wish to be able to disassemble the model, you may asked the person who printed the kit to adjust the dimension of the hoops so they are loose fitting or you can use rubber bands to temporarily secure the model.
The hoops are tapered to match the outside curve of the staves. Make sure the smaller side is toward the end of the barrel. The smaller side will be up when the inscription is right side up and you can just slip the hoops into the barrel. The chime hoops should be installed first. Use your finger tips to bring them down into their respective grooves. Some force maybe required depending on the fit.
Do the same with the bilge hoops.
The last step remaining is to screw in the bottom plug if you opted for the bank or the lid if you opted for the jar.
Enjoy.
Wooden Barrel Model Kit I submitted for the Envision the Future Design Challenge.
This tactile model is a representation of a small wooden barrel approximately 6 by 4.5 inches to help a visually impaired person understand the traditional craft of making barrels, buckets, baths and all forms of storage containers knows as Coopering. The craftsman who makes them is called a cooper.
A barrel, cask, or tun is a hollow cylindrical container, traditionally made of wooden staves bound by wooden or metal hoops and possessing flat ends or heads.
The model was designed in Autodesk® Fusion 360™ and has been adapted in order to support 3D printing. The model is comprise of 16 staves, 2 chime hoops, 2 bilge hoops and 2 sets of heads (3 parts each) so it can be assemble as either a bank or a jar. All the parts are inscribed with braille for easy identification except for the Top Head Ring used for the jar assembly as this part’s surface does not allow for an inscription and the optional storage box.
Due to the variances in tolerance with different 3D Printers, it may not be possible to take the model apart once the hoops have been fully seated in their respective positions. If the model is to be assemble and disassemble repeatedly, then either the x and y scale of the hoops need to be adjusted during the slicing prior to printing or rubber bands can be used instead of the hoops to keep the model firmly assembled.
All the parts can be printed without support except the Bottom Head Plug in order to allow the braille inscription. The chime and bilge hoops can be printed together as the chime hoop fits inside the bilge hoop with enough clearance. The staves are to be printed on their side. All the STLs have the correct orientation and are centred on the bed for printing. A separate set of STLs without braille are also supplied for people who would like to print the model but do not require the inscriptions.
Common parts to be printed:
16 Staves
2 Chime Hoops
2 Bilge Hoops
For the Bank assembly:
1 Top Head with coin slot
1 Bottom Head with treaded hole
1 Bottom Head Plug treaded
For the Jar assembly:
1 Top Head Ring
1 Top Head Lid
1 Bottom Head Full
Optional:
1 Kit Storage Box
1 Kit Storage Box Lid
Assembly
First, select the appropriate set of heads to assemble the kit as either the bank or the jar.
If assembling the bank you will need the top head with coin slot, bottom head with treaded hole and bottom head plug.
If assembling the jar you will need the top head ring, top head lid and bottom head full.
Next, take one stave in one hand and position it with the outside curve against the palm. Insert both heads it their respective slots at the end of the stave. If assembling the jar, the head ring need to be positioned so the recess it facing out to allow the lid to fit properly.
Continue adding stave one by one making sure they are sitting flush with the previous one and apply pressure on the heads so they do not fall off. Once enough staves are in place the heads will stay put.
Once all the staves are in place its time to secure everything by installing the hoops. The Chime hoops go nearest to the head and the bilge hoops go nearest the middle of the barrel. They fit in grooves so the model stays securely assemble. This will fit very tightly and it may not be possible to remove them once they are fully seated. If you wish to be able to disassemble the model, you may asked the person who printed the kit to adjust the dimension of the hoops so they are loose fitting or you can use rubber bands to temporarily secure the model.
The hoops are tapered to match the outside curve of the staves. Make sure the smaller side is toward the end of the barrel. The smaller side will be up when the inscription is right side up and you can just slip the hoops into the barrel. The chime hoops should be installed first. Use your finger tips to bring them down into their respective grooves. Some force maybe required depending on the fit.
Do the same with the bilge hoops.
The last step remaining is to screw in the bottom plug if you opted for the bank or the lid if you opted for the jar.
Enjoy.
Similar models
grabcad
free
wooden barrel
... its parts, the chime, the head, the croze, chime hoops, bilge hoops, bung hole and the bung, staves, rivets and my branding luis
cg_trader
free
Wooden barrel
... the bung, staves, rivets and my branding luis wooden barrel beer hoop oil bung hole architectural other oil barrel wooden barrel
grabcad
free
Wine Barrel
...wine barrel
grabcad
tall: 940mm
head diameter: 570mm
bilge diameter: 690mm
staves: 24
grabcad
free
g gauge 55gallon 6 hoop wood barrel
...gallon wood 6 hoop barrel , scale is 16mm to the foot , two types of tops and plain flat bottom staves have printed in joint line
3d_export
$10
Bilge Chair 3D Model
...ort
bilge rustic wood barrel staves industrial iron modern contemporary chair swivel
bilge chair 3d model jwwright 21918 3dexport
thingiverse
free
Bank Bottom Plug Stopper by roacheart
... to model this in, but the thickness was so thin on my bank, i didn't think it would make it through the 3d printing process.
cg_trader
$2
barrel
...c, whiskey and the like) stand in wooden barrels. barrel 3dmax wood new forest wooden various models various models wooden barrel
thingiverse
free
Stacked Screw sorter storage by tibuck
...mply sand the bottoms a bit to fit on their own they are a snug fit to hold well in place when shaking for screw size separation,
thingiverse
free
Biohazard Mason Jar Lid by Bach_Tender_One
... if you want a different image on the top just comment and i'll be glad to put what you want on it! made in autodesk inventor
3d_export
$8
Wine barrel 3D Model
...el keg cask wooden wood container wine cellar winery brewery staves hoops bung vray
wine barrel 3d model trinity23 27630 3dexport
Papagolfdesigns
thingiverse
free
BLTouch Mount for Wanhao D6. by PapaGolfDesigns
...ch mount for wanhao d6. by papagolfdesigns
thingiverse
bltouch mount for wanhao d6. fits over heat break fan.
print upside down.
thingiverse
free
Board Wall Mount #SKATEFORCE by PapaGolfDesigns
...ce by papagolfdesigns
thingiverse
board wall mount thing for @pressreset #skateforce contest.
video https://youtu.be/pvh-gfd4sfo
thingiverse
free
Board Wall Mount V2 #SKATEFORCE by PapaGolfDesigns
...by papagolfdesigns
thingiverse
board wall mount v2 thing for @pressreset #skateforce contest.
video https://youtu.be/pvh-gfd4sfo
thingiverse
free
55 Gal Drum by PapaGolfDesigns
...ed 12 of them. the client processes hazardus materials and they are stored in 55 gal drums. done in fusion with a quick revolved.
thingiverse
free
#OpenRC #F1 2017 Update WallMount by PapaGolfDesigns
...oard wall mount (thing : 2330845) i did for pressreset design contest. this one is to safely hang my openr/c f1 2017 on the wall.
thingiverse
free
Wanhao D6 GoPro Mount by PapaGolfDesigns
...e door.
*attention: do check the clearance with the printhead. i have no clearance issue on mine but all the machine a different.
thingiverse
free
Wanhao D6 Printhead Cable management Zip-tie Clip by PapaGolfDesigns
...g in the back of the printer moving from right to left. this keeps the cables close to the head and secure.
printed in ngen flex.
Barrel
3d_ocean
$4
Barrel
...barrel
3docean
low poly medi evil barrel wood barrel
barrel, wood barrel, low poly,
3d_ocean
$12
Barrel
...barrel
3docean
barrel barrique drink oak barrel vine wood
a new barrel
3d_ocean
$3
Barrel
...barrel
3docean
barrel furniture
a high quality barrel .
3d_ocean
$4
Barrel
...barrel
3docean
barrel
a lowpoly barrel which is ready to use .
3d_export
$10
barrel
...barrel
3dexport
barrel
3d_export
$5
barrel
...barrel
3dexport
barrel
3d_export
$8
barrel
...barrel
3dexport
lolipop barrel
3d_export
$5
barrel
...barrel
3dexport
!!!radioactive barrel!!!
3d_export
free
barrel
...barrel
3dexport
old barrel
3d_export
$5
Barrel
...barrel
3dexport
high wooden barrel. reconstruction of medieval scandinavian barrel (viking age).
Kit
turbosquid
$3
Bathroom Kit Baño kit
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$19
Kit
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_export
$20
Drift Kit
...drift kit
3dexport
turbosquid
$40
BitCoin Kit
...urbosquid
royalty free 3d model bitcoin kit for download as on turbosquid: 3d models for games, architecture, videos. (1519068)
turbosquid
$9
Industrial kit
...osquid
royalty free 3d model industrial kit for download as on turbosquid: 3d models for games, architecture, videos. (1144117)
turbosquid
$6
Kit Vases
...
turbosquid
royalty free 3d model kit vases for download as on turbosquid: 3d models for games, architecture, videos. (1285114)
turbosquid
free
Survival Kit
...rbosquid
royalty free 3d model survival kit for download as on turbosquid: 3d models for games, architecture, videos. (1637721)
turbosquid
$50
Ninja Kit
...rbosquid
royalty free 3d model ninja kit for download as fbx on turbosquid: 3d models for games, architecture, videos. (1672364)
turbosquid
$35
Brushes Kit
...osquid
royalty free 3d model brushes kit for download as max on turbosquid: 3d models for games, architecture, videos. (1216721)
turbosquid
$19
Medical kit
...osquid
royalty free 3d model medical kit for download as fbx on turbosquid: 3d models for games, architecture, videos. (1486089)
Wooden
3d_ocean
$5
Wooden crate
...wooden crate
3docean
crate wooden
a lowpoly wooden crate .
3ddd
$1
Wooden bucket
...wooden bucket
3ddd
wooden bucket , ведро
wooden bucket
3d_ocean
$2
Wooden Cup
...ional wooden
this is a wooden cup made by blender v2.74 2 files included : wooden-cup.blend, wooden-cup.obj thank you for looking
3d_ocean
$5
Wooden table
...wooden table
3docean
furniture wooden table
a lowpoly wooden table .
3d_ocean
$4
wooden pallet
...wooden pallet
3docean
load transportation wood wooden pallet
wooden pallet
3d_ocean
$8
Wooden fence
...wooden fence
3docean
fence wooden
a high quality wooden fence with high resolution texture
3d_ocean
$5
Wooden bridge
...wooden bridge
3docean
bridge wooden
a high quality wooden bridge with high resolution texture .
3d_ocean
$2
Wooden Cross
...wooden cross
3docean
chapel christmas church cross jesus wooden
wooden hand cross
3d_export
$15
wooden fort
...wooden fort
3dexport
wooden hamlet
3d_export
$8
wooden house
...wooden house
3dexport
wooden house