Wheel nut for 1/10 RC car by LarNil

Last crawled date: 3 years ago

I shattered the wheel nut (see picture) and needed a fast replacement. The green is 3D printed one and the black is the original.
This is a replacement 12mm bring-along wheel nut for my 1/10 Stealth X09 Brushless R/C car. I thought it might be used on other models as well, so I wanted to share it with you.
It has tight tolerences, so you'll need a well calibrated printer. Print with 0,1mm layers and 100% infill.
There are two stl's:
one for a well adjusted printer
one for standard adjusted printers
The stl for welll adjusted printers have tight tolerences
The stl for standard adjusted printer have ~10% bigger holes (because circles are really polygons)
Note: the model is 10:1 (nut model is 120mm real life nut is 12 mm. Remember to scale it Down.