WG 0005 - Cultivator of continuous processing 300cm

Last crawled date: 1 year, 6 months ago

A cultivator WG 0005 is a piece of agricultural equipment used for secondary tillage. Have a frame with teeth (also called shanks) that pierce the soil as they are dragged through it linearly.
Cultivators stir and pulverize the soil before planting (to aerate the soil and prepare a smooth, loose seedbed)
Cultivators of the toothed type are often similar in form to chisel plows, but their goals are different. Cultivator teeth work near the surface, usually for weed control, whereas chisel plow shanks work deep beneath the surface, breaking up hardpan. Consequently, cultivating also takes much less power per shank than does chisel plowing.
This is full solidworks model.
Developed as design documentation for launch into production of this machine. According to the drawings and models, you can implement both single and serial production!
This lot contains a complete set of documentation. Models and drawings of all details made in SolidWorks 2015.
Design documentation for launch into production of this machine (in formats: *.sldprt; *.slddrw; *.sldasm; *.igs; *.stp; *.stl; oll cad drawings in *.pdf; programs for plasma (laser) saved in the format: *.DXF).
Modeled in SolidWorks 2015. The model contains the most popular formats:
SolidWorks: *.sldprt *.slddrw *.sldasm (NATIVE)
IGES: *.iges *.igs
STEP: *.step *.stp
Stereolithography: *.stl
All CAD Drawings are saved in format *.PDF
Programs for plasma (laser) saved in the format: *.DXF