Werkzeughaltersystem fuer ein (Kupfer-) Hammer, Toolbox by cheffeundwackl

Last crawled date: 3 years ago

Servus,
This here is the holder for a hammer.
I have the drawing for the trigger with published. Maybe fit a different tool as well.
I got me here made ​​a complete system for tool holder. I do not like when the tool is loose in the case.
So now I have a separate holder for each tool creates. This holder can be screwed onto a plywood board now. (Spax 3 mm). Holes for the screws are integrated.
I then installed these plywood panels vertically with U-profiles in a Tanos Systainer http://www.systainer.de. On an area of ​​300 mm x 400 mm I get so below about 60 tools (screwdriver, wrench set, pliers, electric tester ...).
I have the created in Catia V5. If someone original files needed, please contact me.