Thingiverse
Wanhao/Maker Select i3 Ramps Conversion for OSOYOO Ramps Kit with 2.8" Touch Screen by Jimbotron
by Thingiverse
Last crawled date: 3 years ago
Updates:
2/17/2017 I made a tweak to the LCD adapter to allow printing without support material.
2/18/2017 I changed the Melzi to Ramps adapter so that the power cables are better aligned with the PSU and the Fan is better positioned to cool the stepper drivers.
2/26/2017 added a USB socket plug so you can access the main RAMPS USB connector.
This is a project I did based on the Osoyoo Ramps kit that I bought from Amazon for $69:https://www.amazon.com/OSOYOO-Controller-Combination-MEGA2560-RAMPS1-4/dp/B01J9ZVPZU/
*A few have reported that the above package is no longer available. Here is a second source that looks identical:https://www.amazon.com/gp/product/B01JA5EQJG
With this above link you'll need to buy the LCD board and the RAMPS board separately. They provide a link to the same osoyoo page that I used - so this is a good sign.
This is specifically for converting a Wanhao Duplicator i3 or MonoPrice Maker Select V2 i3 to Ramps with touch screen using the kit linked above.
The parts that I made include:
MKSTFT28_Adapter05.stl - this is the mount for the LCD touch screen, USB, and Card Reader.
Melzi2RampsAdapter02.stl - this is an adapter that allows you to use the existing screws that held the Melzi board in place to hold the new RAMPS board instead.
4mm_spacer.stl - Use these between 20mm stand-offs from the i3 enclosure and the LCD board. (optional). Print 4 of these. (takes about 5 minutes to print 4).
USBPort_for_MP_Case01.stl is an optional part.
Parts needed:
4 qty 15mm M3 screws for LCD
4 qty 20MM M3 standoffs (Vinyl or Brass).
8 qty 10MM M3 screws for Melzi to RAMPS mount
4 qty 10MM or 15MM standoffs to raise RAMPS board.
Assembly:
Print the 3 parts attached.
Disassemble your Metal enclosure and remove the Melzi board.
Carefully label your connections before pulling them from the Melzi board.
Before full assembly - Configure and Test the Ramps board (get that working first).
Guide is here: http://osoyoo.com/2016/06/30/mks-1-4-3d-printer-board-marlin-firmware-installation-guide/
Ramps Board - Do this after programming and testing your Ramps board with a test print. I added a wiring diagram to help.
Add 10 to 15mm standoffs to the Ramp board holes (the 4 center most holes) on the printed Melzi to Ramps adapter.
Screw your Ramps board onto the adapter standoffs. I highly recommend using Vinyl M3 screws to prevent shorts from metal screws.
Screw your Melzi to Ramps board to the 4 Melzi mount screw holes in the metal enclosure.
LCD Mount - alter to suit your needs.
Connect your LCD to Ramps ribbon Cable to the LCD board only at this time.
Drill out the four LCD inner mounting holes on your Metal enclosure so that the holes come through the top of the enclosure.
Screw 4 20MM M3 standoffs into the holes you drilled in step 1, pointing upward.
Seat 4 15MM M3 Screws into the top of the printed MKSTFT28 Adapter part until they protrude about 5-6mm from the bottom.
Put your LCD board on these screws - the LCD should nicely align with the face of the adapter.
Slide the printed 4mm spacers onto each of the 4 screws protruding from the bottom of the Adapter and LCD board's holes.
Align the TFT28 LCD Board and Adapter onto the M3 standoff screws and tighten them lightly until the LCD assembly is firmly attached to the Metal enclosure. Don't over tighten.
Connect the LCD ribbon cable to the Ramps board.
Test the system then power off and assemble the enclosure.
If you are stuck configuring your Ramps configuration.h file I have posted mine here for your reference: http://www.thingiverse.com/groups/i3/topic:11636
Also, if the LCD does not seem to be communicating properly with the RAMPS board, run the LCD firmware update procedure here: http://osoyoo.com/2016/07/25/mks-tft-2-8-touch-screen/
Optional - access to USB on RAMPS board.
The USB port on the ramps board is inside the metal enclosure and with a ~22x23.5 rectangular hole in the side you can access it. Involves cutting the case - don't do this if you want to keep the original parts intact.
My method:
Eye up the location of the USB socket on the ramps connector and mark the case with a sharpie (please carefully measure this before you cut.
Remove all electronics from the enclosure for safe drilling (You don't want metal shavings on your electronics).
Drill 4 holes ~7 to 8mm in diameter at the corners of the square you measured in step one. They should be spaced 22mm apart horizontally and 23.5mm apart vertically.
Use a jigsaw or hacksaw with a metal cutting blade to cut a straight line between each hole. It should open up to a rectangle once all 4 lines are cut.
Pop in the printed "USBPort_for_MP_Case01.stl" part. The fit should be a snug pressure fit. Use Hot glue if the fit is loose.
This conversion pairs nicely with this backplate for 80mm fans: http://www.thingiverse.com/thing:2137022
2/17/2017 I made a tweak to the LCD adapter to allow printing without support material.
2/18/2017 I changed the Melzi to Ramps adapter so that the power cables are better aligned with the PSU and the Fan is better positioned to cool the stepper drivers.
2/26/2017 added a USB socket plug so you can access the main RAMPS USB connector.
This is a project I did based on the Osoyoo Ramps kit that I bought from Amazon for $69:https://www.amazon.com/OSOYOO-Controller-Combination-MEGA2560-RAMPS1-4/dp/B01J9ZVPZU/
*A few have reported that the above package is no longer available. Here is a second source that looks identical:https://www.amazon.com/gp/product/B01JA5EQJG
With this above link you'll need to buy the LCD board and the RAMPS board separately. They provide a link to the same osoyoo page that I used - so this is a good sign.
This is specifically for converting a Wanhao Duplicator i3 or MonoPrice Maker Select V2 i3 to Ramps with touch screen using the kit linked above.
The parts that I made include:
MKSTFT28_Adapter05.stl - this is the mount for the LCD touch screen, USB, and Card Reader.
Melzi2RampsAdapter02.stl - this is an adapter that allows you to use the existing screws that held the Melzi board in place to hold the new RAMPS board instead.
4mm_spacer.stl - Use these between 20mm stand-offs from the i3 enclosure and the LCD board. (optional). Print 4 of these. (takes about 5 minutes to print 4).
USBPort_for_MP_Case01.stl is an optional part.
Parts needed:
4 qty 15mm M3 screws for LCD
4 qty 20MM M3 standoffs (Vinyl or Brass).
8 qty 10MM M3 screws for Melzi to RAMPS mount
4 qty 10MM or 15MM standoffs to raise RAMPS board.
Assembly:
Print the 3 parts attached.
Disassemble your Metal enclosure and remove the Melzi board.
Carefully label your connections before pulling them from the Melzi board.
Before full assembly - Configure and Test the Ramps board (get that working first).
Guide is here: http://osoyoo.com/2016/06/30/mks-1-4-3d-printer-board-marlin-firmware-installation-guide/
Ramps Board - Do this after programming and testing your Ramps board with a test print. I added a wiring diagram to help.
Add 10 to 15mm standoffs to the Ramp board holes (the 4 center most holes) on the printed Melzi to Ramps adapter.
Screw your Ramps board onto the adapter standoffs. I highly recommend using Vinyl M3 screws to prevent shorts from metal screws.
Screw your Melzi to Ramps board to the 4 Melzi mount screw holes in the metal enclosure.
LCD Mount - alter to suit your needs.
Connect your LCD to Ramps ribbon Cable to the LCD board only at this time.
Drill out the four LCD inner mounting holes on your Metal enclosure so that the holes come through the top of the enclosure.
Screw 4 20MM M3 standoffs into the holes you drilled in step 1, pointing upward.
Seat 4 15MM M3 Screws into the top of the printed MKSTFT28 Adapter part until they protrude about 5-6mm from the bottom.
Put your LCD board on these screws - the LCD should nicely align with the face of the adapter.
Slide the printed 4mm spacers onto each of the 4 screws protruding from the bottom of the Adapter and LCD board's holes.
Align the TFT28 LCD Board and Adapter onto the M3 standoff screws and tighten them lightly until the LCD assembly is firmly attached to the Metal enclosure. Don't over tighten.
Connect the LCD ribbon cable to the Ramps board.
Test the system then power off and assemble the enclosure.
If you are stuck configuring your Ramps configuration.h file I have posted mine here for your reference: http://www.thingiverse.com/groups/i3/topic:11636
Also, if the LCD does not seem to be communicating properly with the RAMPS board, run the LCD firmware update procedure here: http://osoyoo.com/2016/07/25/mks-tft-2-8-touch-screen/
Optional - access to USB on RAMPS board.
The USB port on the ramps board is inside the metal enclosure and with a ~22x23.5 rectangular hole in the side you can access it. Involves cutting the case - don't do this if you want to keep the original parts intact.
My method:
Eye up the location of the USB socket on the ramps connector and mark the case with a sharpie (please carefully measure this before you cut.
Remove all electronics from the enclosure for safe drilling (You don't want metal shavings on your electronics).
Drill 4 holes ~7 to 8mm in diameter at the corners of the square you measured in step one. They should be spaced 22mm apart horizontally and 23.5mm apart vertically.
Use a jigsaw or hacksaw with a metal cutting blade to cut a straight line between each hole. It should open up to a rectangle once all 4 lines are cut.
Pop in the printed "USBPort_for_MP_Case01.stl" part. The fit should be a snug pressure fit. Use Hot glue if the fit is loose.
This conversion pairs nicely with this backplate for 80mm fans: http://www.thingiverse.com/thing:2137022
Similar models
thingiverse
free
Wanhao Duplicator I3 Melzi to RAMPS Adapter by jamesarm97
...be. use at your own risk. i made a similar board for myself that adapts a radds board so...
thingiverse
free
Melzi to RADDS board mount by jamesarm97
...included a replacement front for the older enclosures. this is where i brought out my lcd cable and have a usb connector mounted.
thingiverse
free
Adapter to install BigTreeTech SKR V1.4 in Wanhao Duplicator i3 (Replacing Melzi board) by bensigsworth
...ting pillars for the skr and mosfet m3 as required.
print 4 washers to trap the bracket into position using the 4 original screws
thingiverse
free
Wanhao i3 Melzi to MKS Gen adapter by Angry_Samsquanch
...trudes a little so you may need to use longer screws with m4 nuts on the bottom if the m4 screws won't thread into the holes.
thingiverse
free
Spacer standoff M3 x 4mm by Hutasu
...to lift the pcb. center hole is
too small for m3 screw, but i drilled the hole bigger. four of these printed in under one minute.
thingiverse
free
Wanhao Duplicator i3 Melzi to Ramps 1.4 Adapter Fixed + Firmware by remuslt
...way you like.
please use arduino1.0.6 for windows to flash the marlin firmware (thanks go to bq and their hephestos 3d printer).
thingiverse
free
RAMPS mount for Anet A8 by SirFarthingtonSmythe
...ol connector pcb to ramps-1.4 shield using one(1) 35mm m3 screw.
4) secure bracket to anet a8 frame using four(4) 15mm m3 screws.
thingiverse
free
MEGA 2560 RAMPS 1.4 LCD 40MM FAN SHIELD by jessefilson94
... heat up the holes to accurately size them.
this is for printers with mega 2560 + ramps 1.4 + reprap lcd adapter
hope you like it
thingiverse
free
Wanhoa i3 Mosfet bracket by rcflyers
...board screws and slip this bracket over the 2 case studs nearest to the lcd display.
then refit the board and connect the wiring.
grabcad
free
Mounting plate for a GT2560 Melzi board
...60 melzi board.
the 2 mounting holes in center are designed for 4mm screws.
standoffs are designed to be tapped with 3mm threads.
Osoyoo
thingiverse
free
Raspberry Pi 3_Modell B - Sleeve with 3.5 TFT - OSOYOO KeDei Remix by HyDz
...3_modell b - sleeve with 3.5 tft - osoyoo kedei remix by hydz
thingiverse
remix to use the osoyoo 3.5 screen with the hdmi link.
thingiverse
free
KeDei / OSOYOO 3.5" TFT Case VESA 75 by avs727
...kedei / osoyoo 3.5" tft case vesa 75 by avs727
thingiverse
remixed bottom part for vesa 75 mount
thingiverse
free
Ball bearing caster for Osoyoo Robot Car v2 by brent_atkinson
...locally. it also adjusts the mounting holes and hex cutouts to work with the same screws and bolts that ship with the osoyoo kit.
thingiverse
free
KeDei / OSOYOO 3.5" TFT Case by JuneBeatle
...int, i printed the back cover at a lower quality (for quick printing) which is why it's a little uglier than the front cover.
thingiverse
free
Osoyoo 5" Display Case Caribou3D (3030) with DSI Connector for Raspberry by toddel
..._s00?ie=utf8&psc=1). i use this printer with klipper running on a raspberry pi.
you need the clamps 2x...
no supports needed.
thingiverse
free
OSOYOO 3.5 Inch DSI Touchscreen mount for Anycubic Mega by ThxAndBye
...me.
the original hex screws that mounted the original display can be reused to mount the adapter to the chassis of the printer.
thingiverse
free
wanhao gr2 octopi mod (raspberry + osoyoo 3.5 screen) by luckylup
...int with 5x5x5 walls/top/bottom and 40% infill
each part is interlocking with the original parts, no modifications must be made
thingiverse
free
Case for Raspberry Pi 4 + GeekWorm P165-A + Osoyoo Screen 3.5" by adjuro
...;sr=8-3
https://www.amazon.com/gp/product/b07y6zz674/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=utf8&psc=1
5 m3x20 screws
1 m3 nut
thingiverse
free
LCD Bezel for OSOYOO 5 Inch DSI Touch Sceen LCD Display by servabofidem
... fusion360. remove the bolts on the back, and it'll slide right into the side. i put 4 3mm holes for mounting in the bezel.
thingiverse
free
Jointing 3.5 inch monitor to xbox 360 controller by kantamochida
...3.5 inch monitor to xbox 360 controller 3.5 inch monitorhttps://www.amazon.com/osoyoomonitor-display-instructions-raspberry/dp/b01n447aey/ref=sr_1_1?ie=utf8&qid=1511399907&sr=8-1&keywords=osoyoo hdmi...
Jimbotron
thingiverse
free
PIral by Jimbotron
...piral by jimbotron
thingiverse
this is a π "pi" spiral for those who love π.
thingiverse
free
Japanese Doll Ornament by Jimbotron
...
thingiverse
this is a japanese doll ornament for my daughter and anyone else on thingiverse who wants to download and print it.
thingiverse
free
PI Pile or PI Flower? by Jimbotron
... a spiraling pile of pi that i did for fun - and for those who love pi
my daughter pointed out that it also works great as a top.
thingiverse
free
Spiral Shell Based on Fibonacci Spiral by Jimbotron
...al is inspired by the awesome fibonacci sequence and fibonacci spirals.
it is 6 spiral spokes extruded upward and rotated around.
thingiverse
free
EMF Wave / Test Print by Jimbotron
... with minimal sagging and stray strands.
this is a good print challenge if you want to show off your 3d printer tweaking skills.
thingiverse
free
Icebergs for penguins, models, and scenery by Jimbotron
... (clear) pla with no supports or raft needed. i suggest infill at 10%.
i'll try to post a clearer picture when time permits.
thingiverse
free
Twirling Fidget Toy by Jimbotron
...m still working on that) i made a neat little fidget toy that my kids love fiddling with so i'm sharing it with the community
thingiverse
free
Wacky Tree Fractal (WTFractal!) by Jimbotron
...o eventually get around to trying to print this. it will certainly need supports. i'll post pics and details once complete.
thingiverse
free
Grove Ultrasonic Ranger Servo Mount by Jimbotron
...ve or seeed sonic ranger - this is the mount for you.
the ...mount6 version is plain
the ...mount5 version has mouse ears for fun
thingiverse
free
Wearable Royal Crown by Jimbotron
... - use about 84 to 88% scale to shrink it down a bit. also, if your printer is limited to 200x200 use 93 or less scaling to fit.
Wanhao
thingiverse
free
Wanhao Logo Plate / Wanhao Logo Schild by JMDesigns
...wanhao logo plate / wanhao logo schild by jmdesigns
thingiverse
wanhao logo plate / wanhao logo schild
thingiverse
free
Wanhao logo by nebtio
...wanhao logo by nebtio
thingiverse
wanhao logo
thingiverse
free
Wanhao keychain by Rein3003
...wanhao keychain by rein3003
thingiverse
a keychain with the logo of wanhao
thingiverse
free
Wanhao Di3 v2 Light / Wanhao Di3 v2 Beleuchtung by JMDesigns
...wanhao di3 v2 light / wanhao di3 v2 beleuchtung by jmdesigns
thingiverse
wanhao di3 v2 light / wanhao di3 v2 beleuchtung
thingiverse
free
TUSH For Wanhao by wtmi1992
...tush for wanhao by wtmi1992
thingiverse
the ultimate spool holder, modified for the top of the wanhao control box. fits snug.
thingiverse
free
fanduct wanhao d12 by theopoilmek
...fanduct wanhao d12 by theopoilmek
thingiverse
fanduct pour wanhao d12
thingiverse
free
Wanhao i3 Marlin by johan21
...wanhao i3 marlin by johan21
thingiverse
marlin for wanhao i3 rampsboard 1.4.
thingiverse
free
Wanhao Duplicator i3 by imagineering4
...wanhao duplicator i3 by imagineering4
thingiverse
these are the stl files for the improvements to the wanhao duplicator i3, v2
thingiverse
free
Wanhao D6 filament guard
...wanhao d6 filament guard
thingiverse
this is a filament guard for wanhao d6 machine to avoid the filament unrolling
thingiverse
free
Wanhao Duplicator i3 Model by Hilde3D
...wanhao duplicator i3 model by hilde3d
thingiverse
wanhao duplicator i3 model
Ramps
turbosquid
$3
Kicker Ramp - Skate Ramp
...ramp - skate ramp for download as 3ds, obj, c4d, fbx, and dae on turbosquid: 3d models for games, architecture, videos. (1153575)
turbosquid
$2
Ramp
...squid
royalty free 3d model ramp for download as obj and fbx on turbosquid: 3d models for games, architecture, videos. (1494204)
turbosquid
$5
ramp
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_export
$5
Ramp 3D Model
...ramp 3d model
3dexport
ramp jump carjump carramp car
ramp 3d model ryisnelly100 83186 3dexport
turbosquid
$10
Ramp and Barrels
...d
royalty free 3d model ramp and barrels for download as fbx on turbosquid: 3d models for games, architecture, videos. (1263040)
turbosquid
$19
Skate Ramp
...ty free 3d model skate ramp for download as dxf, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1187602)
turbosquid
$19
Skate Ramp
...ee 3d model skate ramp for download as dxf, obj, c4d, and fbx on turbosquid: 3d models for games, architecture, videos. (1187673)
turbosquid
$45
ramp door_center
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$40
Ramp.3DS
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$20
Skater Ramp
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
Conversion
3ddd
$1
Conversation Seat
...шетка
the conversation seat made in englandhttp://www.squintlimited.com/products/the_conversation_seat/gold
+ max 2011
3d_export
$10
Converse 3D Model
...converse 3d model
3dexport
converse shoe pc unix mac
converse 3d model electropainter17075 38067 3dexport
turbosquid
$100
converse-shoe
...quid
royalty free 3d model converse-shoe for download as c4d on turbosquid: 3d models for games, architecture, videos. (1398427)
turbosquid
$10
Conversation Furniture
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$7
Converse Allstars
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
design_connected
$16
Conversation Club Chair
...conversation club chair
designconnected
donghia conversation club chair chairs computer generated 3d model. designed by n/a.
design_connected
$27
Hemicycle Conversation Chair
...rsation chair
designconnected
ligne roset hemicycle conversation chair computer generated 3d model. designed by nigro, philippe.
3d_export
$24
Converse keds 3D Model
...converse keds 3d model
3dexport
converse all star ked shoe clothes sports
converse keds 3d model vermi1ion 26201 3dexport
3ddd
$1
Converse All-Star Shoes
...converse all-star shoes
3ddd
кеды , обувь
converse all-star shoes
design_connected
$18
CONVERSE Jack Purcell Sneakers
...converse jack purcell sneakers
designconnected
converse jack purcell sneakers computer generated 3d model.
I3
3d_export
$10
suv i3
...suv i3
3dexport
suv i3 2013 series
3d_ocean
$89
BMW i3 2012
...y, in real units of measurement, qualitatively and maximally close to the original. model formats: - *.max (3ds max 2008 scanl...
cg_studio
$99
BMW i3 20143d model
...
cgstudio
.3ds .c4d .fbx .lwo .max .obj - bmw i3 2014 3d model, royalty free license available, instant download after purchase.
cg_studio
$99
BMW i3 20123d model
...tudio
.3ds .c4d .fbx .lwo .max .mb .obj - bmw i3 2012 3d model, royalty free license available, instant download after purchase.
cg_studio
$99
BMW i3 20143d model
...tudio
.3ds .c4d .fbx .lwo .max .mb .obj - bmw i3 2014 3d model, royalty free license available, instant download after purchase.
humster3d
$75
3D model of BMW i3 2014
...
buy a detailed 3d model of bmw i3 2014 in various file formats. all our 3d models were created maximally close to the original.
humster3d
$40
3D model of Kitchen Set I3
...uy a detailed 3d model of kitchen set i3 in various file formats. all our 3d models were created maximally close to the original.
3d_ocean
$30
Kitchen set i3
...ensils oven plates shelves sink table ware
kitchen set i3 include 3d models: cooker, oven, sink, cupboards, table, chair, plates.
3d_ocean
$89
BMW i3 2014
...y, in real units of measurement, qualitatively and maximally close to the original. model formats: - *.max (3ds max 2008 scanl...
cg_studio
$99
BMW i3 Concept 20113d model
...i3
.3ds .c4d .fbx .lwo .max .obj - bmw i3 concept 2011 3d model, royalty free license available, instant download after purchase.
Touch
3ddd
$1
Touch
...touch
3ddd
touch , альфа банк
электронный терминал для очереди
3ddd
$1
GSG / Touch
... ванна
http://www.ceramicagsg.com/sanitaryware-touch/bathtub-touch-free-standing.html
turbosquid
$10
Oculus Touch
...squid
royalty free 3d model oculus touch for download as skp on turbosquid: 3d models for games, architecture, videos. (1462433)
turbosquid
$64
iPod Touch
...ty free 3d model ipod touch for download as 3ds, max, and obj on turbosquid: 3d models for games, architecture, videos. (1299603)
3ddd
$1
iPod Touch 5
...ipod touch 5
3ddd
apple , плеер
модель ipod touch 5
3ddd
$1
Asnaghi "Touch"
...asnaghi "touch"
3ddd
asnaghi , touch
фабрика: asnaghi
модель: touch
3ddd
free
Japanese stone touch
...japanese stone touch
3ddd
фонарь
japanese stone garden touch
японский садовый фонарь
икеокоми-гата
3d_ocean
$15
IPOD TOUCH 5
...apple blender ipad iphone ipod mp3 nano player touch
3d model of ipod touch 5 in 3 colours. available in .3ds, .blend, .obj, .x3d
3d_ocean
$12
iPod touch 5G
...pod jobs nano steve touch
ipod touch 3d model. formats, fbx, obj, max(2010) textures and materials with multiple colors included.
3ddd
$1
HTC Touch HD
...http://www.gsmarena.com/htc_touch_hd-2525.php фото:http://i.smartphone.ua/img/phones/htc-touch-hd/foto_001.jpg
Select
3ddd
$1
TUBADZIN SELECT
...max 2014, 2011.
fbx 2014, 2013, 2011,
obj
_____________________________________http://www.tubadzin.pl/en/collection/324
3ddd
$1
Плитка Selection
... supergres , плитка
плитка selection - supergres ceramiche
turbosquid
$15
Christmas Selection
...royalty free 3d model christmas selection for download as fbx on turbosquid: 3d models for games, architecture, videos. (1696333)
turbosquid
$39
Vases selection
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
free
SELECTIVE RACKING SYSTEM
...yalty free 3d model selective racking system for download as on turbosquid: 3d models for games, architecture, videos. (1282512)
turbosquid
$10
Hansgrohe ShowerTablet Select
...ee 3d model hansgrohe showertablet select for download as max on turbosquid: 3d models for games, architecture, videos. (1336955)
turbosquid
$29
Chill selectional sofa
...odel chill selectional sofa for download as max, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1465691)
3ddd
free
Lunaria - Nova, ASA Selection
... asa selection , dried flowers
ветка лунарии в вазе nova, asa selection
3ddd
$1
inno SELECT SLIM chair
...inno select slim chair
3ddd
inno
high detailed inno select slim chair
turbosquid
$29
Select Chaise Lounge
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
Screen
archibase_planet
free
Screen
...screen radiator screen radiator enclosure lattice
screen radiator n120315 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Screen
...screen
archibase planet
screen group display
movie screen - 3d model for interior 3d visualization.
3ddd
$1
Screen
...screen
3ddd
screen
modern dressing wall partition
3d_ocean
$15
HP Screen
...test hp screen. it is has different object, so you can use it as a wall mounted screen or a stand on table. hope you all like it.
3d_export
$10
Accessories screen LCD screen 3D Model
...d screen 3d model
3dexport
accessories screen lcd 3d model interior
accessories screen lcd screen 3d model sunupcg 17831 3dexport
turbosquid
$25
SCREEN
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$2
Screen
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_export
$10
Screen metal screen microwave 3D Model
...ave 3d model
3dexport
screen metal microwave oven 3d model interior
screen metal screen microwave 3d model sunupcg 17847 3dexport
3d_ocean
$5
Projector Screen
...hat have presentations. the projector screen consists of an alluminum structure that holds the canvas up. this model can be us...
archive3d
free
Screen 3D Model
...rchive3d
screen folding screen
screen n020811 - 3d model (*.3ds) for interior 3d visualization.
Kit
turbosquid
$3
Bathroom Kit Baño kit
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$19
Kit
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_export
$20
Drift Kit
...drift kit
3dexport
turbosquid
$40
BitCoin Kit
...urbosquid
royalty free 3d model bitcoin kit for download as on turbosquid: 3d models for games, architecture, videos. (1519068)
turbosquid
$9
Industrial kit
...osquid
royalty free 3d model industrial kit for download as on turbosquid: 3d models for games, architecture, videos. (1144117)
turbosquid
$6
Kit Vases
...
turbosquid
royalty free 3d model kit vases for download as on turbosquid: 3d models for games, architecture, videos. (1285114)
turbosquid
free
Survival Kit
...rbosquid
royalty free 3d model survival kit for download as on turbosquid: 3d models for games, architecture, videos. (1637721)
turbosquid
$50
Ninja Kit
...rbosquid
royalty free 3d model ninja kit for download as fbx on turbosquid: 3d models for games, architecture, videos. (1672364)
turbosquid
$35
Brushes Kit
...osquid
royalty free 3d model brushes kit for download as max on turbosquid: 3d models for games, architecture, videos. (1216721)
turbosquid
$19
Kit Bedroom
...osquid
royalty free 3d model kit bedroom for download as max on turbosquid: 3d models for games, architecture, videos. (1290049)
8
turbosquid
$6
Rock 8-8
...urbosquid
royalty free 3d model rock 8-8 for download as obj on turbosquid: 3d models for games, architecture, videos. (1659393)
3ddd
$1
Italamp 387/8+8
...italamp 387/8+8
3ddd
italamp
люстра italamp 387/8+8
размеры 92x71h
3ddd
$1
8 марта
...8 марта
3ddd
8 марта
кресло 8 марта
design_connected
$16
No 8
...nected
photo-realistic 3d models of the sibast no 8 armchair from sibast for 3d architectural and interior design presentations.
3d_export
$5
hinge 8
...hinge 8
3dexport
hinge 8
3d_export
$5
iphone 8
...iphone 8
3dexport
iphone 8
turbosquid
$69
iPhone 8 and iPhone 8 Plus
... free 3d model iphone 8 and iphone 8 plus for download as max on turbosquid: 3d models for games, architecture, videos. (1202442)
turbosquid
$12
Calligraphic Digit 8 Number 8
...hic digit 8 number 8 for download as max, obj, fbx, and blend on turbosquid: 3d models for games, architecture, videos. (1389341)
3ddd
free
PLANTS 8
...plants 8
3ddd
цветок , горшок
plant 8,,, hope u all like it
3ddd
$1
8 Марта / Amadey
...8 марта / amadey
3ddd
8 марта
8 marta amadey
Maker
3d_ocean
$17
Coffee Maker
...coffee maker
3docean
breakfast coffee drip electric maker morning
detailed coffee maker and a plug.
3ddd
$1
coffee maker
...coffee maker
3ddd
кофемашина
coffee maker
3d_export
$10
chapati maker
...chapati maker
3dexport
it is a indian traditional chapati maker
archibase_planet
free
Coffee maker
...aker
archibase planet
percolator coffee-machine coffee maker
coffee maker - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Coffee maker
...aker
archibase planet
percolator coffee-machine coffee maker
coffee maker - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Coffee maker
...aker
archibase planet
percolator coffee-machine coffee maker
coffee maker - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Сoffee maker
...er
archibase planet
coffee maker percolator coffee-machine
сoffee maker n020112 - 3d model (*.3ds) for interior 3d visualization.
archibase_planet
free
Coffee maker
...aker
archibase planet
coffee maker percolator coffee-machine
coffee maker - 3d model (*.gsm+*.3ds) for interior 3d visualization.
3ddd
$1
Juice Maker
...juice maker
3ddd
соковыжималка
fully detailed kenwood juice maker
archibase_planet
free
Coffee maker
...hibase planet
coffee maker percolator coffee-machine
coffee maker n140611 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
2
design_connected
$11
No 2
...no 2
designconnected
sibast no 2 computer generated 3d model. designed by sibast, helge.
turbosquid
$6
Cliff Rock 2-2
...uid
royalty free 3d model cliff rock 2-2 for download as obj on turbosquid: 3d models for games, architecture, videos. (1619161)
turbosquid
$22
Classic baluster (2) (2)
...assic baluster (2) (2) for download as max, obj, fbx, and stl on turbosquid: 3d models for games, architecture, videos. (1483789)
turbosquid
$99
Smilodon 2 Pose 2
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$20
Barrel Barricade 2-2
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$6
Wall Trophy (2) (2)
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
free
Tire label 2 of 2
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3ddd
$1
Кровать, 2 тумбочки, 2 светильника
...кровать, 2 тумбочки, 2 светильника
3ddd
кровать, 2 тумбочки, 2 светильника
нормальное качество
формат 3ds max
без текстур
3ddd
free
Кровать, 2 тумбочки, 2 светильника
...кровать, 2 тумбочки, 2 светильника
3ddd
кровать, 2 тумбочки, 2 светильника
нормальное качество
формат 3ds max
без текстур
turbosquid
$19
Loft wooden square box chandelier (2) (2) (2)
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.