WANHAO DUPLICATOR D9 400 x axis extruder plate by bubu1882

Last crawled date: 4 years, 1 month ago

WANHAO DUPLICATOR D9 400 x axis extruder plate
This upgrade will allow you to rotate the printer head 180 degrees. This causes the nozzle to be closer to the X axis and thus reduce the height differences between the nozzle and the bed While printing.
Consider that there are a number of things that need to be done to make this upgrade work like a drill to make thread in the printer head.
You can see where to place the head of the printer according to the pictures I upload.
In addition, holes should be drilled according to the extruder plate hole locations.
You also need four 25mm M3 screws to strengthen the part between the layers.
In addition, the Z axis beams need to be moved forward more than usual so that the bed can reach its entire range because now the nozzle is located closer to the X axis.
As a result, another hole must be drilled in the printer's chassis beams in order to have new access to the screw that holds the Z axis beams. The hole does not have to be accurate just for the purpose of That the Allen screwdriver through it so don't be afraid.
You can see in the pictures the distance of the new hole
The bracket fits the original version of WANHAO and also the version of the D9 Mk2 WAGGSTER FIRMWARE V1.0 software
WANHAO DUPLICATOR D9 400 BLTouch brackethttps://www.thingiverse.com/thing:4260266