Wall mounts for Ikea Socker Plant Pots by Cpt_Unstable

Last crawled date: 3 years ago

A variety of wallmounts for 10- and 12cm Ikea Socker sheetmetal-planters as well as a matching wallmount for standard glass bottles (0.5l, german alu screw caps).
Most are intended for use with an automatic irrigation system based on porcelain cones and contain a hook to retain the feeding tube.
There also is a version of every kind with a hole for mounting a hook, so you can add a stick or piece of string to help the plants climb upwards.
The bottle mount is to be used with Ikea sirup bottles that i had on hand.
They just screw in and can be used as water supply for the irrigation system.
Remember to mount the bottle in a way that the water level is below the lowest irrigation point, otherwise your plants will be flooded... ;)
All parts are printable without support in ABS/0.2mm without raft.
The mounting plate should be positioned flat on the heatbed.
Drilling templates provided!
EDITS:
06.01.2017 - Revised 10cm-holders, as the inner diameter was slightly larger than expected, old version worked too, tho
12.01.2020 - Edited the standard drill-tremplate, as the dimensions were cleraly wrong. Also added a PDF of the drill template.