Thingiverse
Wall-E Robot - Fully 3D Printed by ChaosCoreTech
by Thingiverse
Last crawled date: 3 years ago
This is the video showcasing Wall-E. So watch for more information and to see it in action! https://youtu.be/sBTc96pNLwo
That’s right! It’s finally time for Wall-E. This is a semi-functional Wall-E Robot that I created in Tinkercad, printed out on my Robo3D and painted by my wife using spray painting, airbrush painting and brush painting techniques.
I have links to the files for Wall-E listed below. Please note that there are two versions of some files. These are basically for the electronic and non electronic versions. The only two files with multiple versions are the neck files and the leg bracket files. These files have “Non Electric” in the file name so they’re easy to spot.
In the electronic version of Wall-E there are 43 individual files, 84 main parts, 72 treads, and 144 pins needed. So that's a total of 300 individual parts that need to be printed.
This is a list of the electronics components that I used. However, be aware that the DC motors I chose to drive Wall-E DO NOT work. They don’t have enough torque to drive him. So if you want to try to make this robot work, you’ll either need to redesign the legs/wheel mounts, or you’ll need to find a really high torque motor that is in a micro servo casing. The mounts I have built in fit micro servos specifically and it would be difficult to fit any other sized motors here.
Sub Micro Servo (Neck/Head):https://www.adafruit.com/products/2201
DC Motors in a Micro Servo Body (Drive Motors):https://www.adafruit.com/products/2941
There were a few other components I used like an Arduino Uno to control the whole thing, a bluetooth chip to control it with my phone, and a speaker to have him make noises. But these are not specifically fitted in here, so as long as you can fit it in the body, you’ll be good. So you can use your favorite components for this.
I also used #8 ½ inch screws and nuts to put him together and parts are fitted for these screws specifically. You’ll need roughly 30 screws for this. Most of the time the screws will screw right into the plastic and you won’t need the nuts, but most places have the ability to insert nuts if needed. Up to you.
Also some of the STLs will need to be printed more than once to complete Wall-E so I’ll put the quantity needed in the STL file name.
I will be creating some diagrams to show how Wall-E is assembled shortly. So if you’re looking to build this for yourself, check back in a few days for those.
I really hope you enjoyed this project. Let me know what you thought. Happy printing. :)
The Non Electronic files are added now. It turns out I only needed to change the neck piece out. So instead of printing all the pieces with "neck" starting them. You can just download the "neck non electronic" file and that'll take care of the whole neck. The other part I was considering changing was the motor mounts for the legs but I would have to redesign that whole section so the parts will work without motors, there will just be a small gap underneath him.
That’s right! It’s finally time for Wall-E. This is a semi-functional Wall-E Robot that I created in Tinkercad, printed out on my Robo3D and painted by my wife using spray painting, airbrush painting and brush painting techniques.
I have links to the files for Wall-E listed below. Please note that there are two versions of some files. These are basically for the electronic and non electronic versions. The only two files with multiple versions are the neck files and the leg bracket files. These files have “Non Electric” in the file name so they’re easy to spot.
In the electronic version of Wall-E there are 43 individual files, 84 main parts, 72 treads, and 144 pins needed. So that's a total of 300 individual parts that need to be printed.
This is a list of the electronics components that I used. However, be aware that the DC motors I chose to drive Wall-E DO NOT work. They don’t have enough torque to drive him. So if you want to try to make this robot work, you’ll either need to redesign the legs/wheel mounts, or you’ll need to find a really high torque motor that is in a micro servo casing. The mounts I have built in fit micro servos specifically and it would be difficult to fit any other sized motors here.
Sub Micro Servo (Neck/Head):https://www.adafruit.com/products/2201
DC Motors in a Micro Servo Body (Drive Motors):https://www.adafruit.com/products/2941
There were a few other components I used like an Arduino Uno to control the whole thing, a bluetooth chip to control it with my phone, and a speaker to have him make noises. But these are not specifically fitted in here, so as long as you can fit it in the body, you’ll be good. So you can use your favorite components for this.
I also used #8 ½ inch screws and nuts to put him together and parts are fitted for these screws specifically. You’ll need roughly 30 screws for this. Most of the time the screws will screw right into the plastic and you won’t need the nuts, but most places have the ability to insert nuts if needed. Up to you.
Also some of the STLs will need to be printed more than once to complete Wall-E so I’ll put the quantity needed in the STL file name.
I will be creating some diagrams to show how Wall-E is assembled shortly. So if you’re looking to build this for yourself, check back in a few days for those.
I really hope you enjoyed this project. Let me know what you thought. Happy printing. :)
The Non Electronic files are added now. It turns out I only needed to change the neck piece out. So instead of printing all the pieces with "neck" starting them. You can just download the "neck non electronic" file and that'll take care of the whole neck. The other part I was considering changing was the motor mounts for the legs but I would have to redesign that whole section so the parts will work without motors, there will just be a small gap underneath him.
Similar models
thingiverse
free
wall-e neck piece by anonymousstudent
...wall-e neck piece by anonymousstudent
thingiverse
wall-e beck part, fits servos
thingiverse
free
Elfdroid Neck by aneta82016
...imply methods of attaching the head to the neck, although i think screwing in a 21mm diameter circular servo horn is more secure.
thingiverse
free
Animatronic Neck Mechanism by PagliaIndustries
...eft and right). the top servo gets bolted to the bottom on "neck_tilt_2" (resulting in the neck moving left and right).
thingiverse
free
Points motor for Piko/LGB G Scale
...coder-mit-servo-funktionstaste-f0-f28-oder-weichenadresse-schaltbar-nachwippen-fahrreglersteuerung-glockenschwingen
15 mm x 33 mm
thingiverse
free
Rock Crawler servo adapter parts by tjheikki
...rs, they were slightly bigger than the stock ones but fit fine after some quick carving, and have survived a lot of hard driving.
thingiverse
free
Simple SG90 Micro Servo Motor mount by confusedCoyote
...icro servo motor. it can be screwed down with a pair of m2.5 bolts.
included is the sketchup file so you can easily modify them.
cg_trader
$15
1-12 RC Muscle Car | 3D
... bolts, bearings and electronics. such electronics as a motor, battery, charger, radio, servo. сost of all is approximately 50$.
thingiverse
free
anet a6 direct drive version from Dovanzeijl (non tested yet) by panch47
...ruder motor. i haven't tested it yet.
the part "direct drive 1" is removable to use it with a bowden extruder type.
thingiverse
free
Micro-servo (SG90) round mounting plate by mavu
...printed part, but they are there, and with the correct scaling work just fine.
i only tried pla.
edit: added freecad source file
thingiverse
free
Steering servo first axel by Pka78
...t have calibrated printer i really suggest that you enlarge this model something like 2%.
"servo horn, for t25-servo".
Chaoscoretech
thingiverse
free
Alien3D Mascot by ChaosCoreTech by alieneila
...
thingiverse
the official alien3d mascot created by garrett and chelsea from chaoscoretech https://www.twitter.com/chaoscoretech
thingiverse
free
JATMN Ban Hammer by ChaosCoreTech
...jatmn ban hammer by chaoscoretech
thingiverse
for jatmn :)
thingiverse
free
Dumbbell - 25lbs by ChaosCoreTech
...giverse
i detailed how this was created in a fusion 360 tutorial video. you can see the video here: https://youtu.be/nr58baxyoam
thingiverse
free
ChaosCoreTech's Spin Logo by Novice3DPrints
...nnel/ucvmyytnqqrctg1wrfxto14q
as for printing it you do have to have supports on i used cura and it worked also i used 20% infill
thingiverse
free
Wall-E Figure Collab ChaosCoreTech and Sebastian
...or better support removal experience!
edit dec 19, 2019: rebuilt legs, added arm joints, hand joints, and hollowed out the center
thingiverse
free
Reptar [Rugrats] by ChaosCoreTech
...new we had to do it. i'm really happy with how it came out. :)
printer: peopoly moai
resin: peopoly green
layer height: 0.1mm
thingiverse
free
Bottle Funnel by ChaosCoreTech
...just a basic funnel. :)
here's a video showing how i designed it and what i used it for. enjoy!https://youtu.be/g9p1scn8d98
thingiverse
free
BMO - Adventure Time! by ChaosCoreTech
...ed. i printed it on my robo 3d r1 with hatchbox white pla.
print settings:
layer height: 0.3mm
infill: 20%
supports: no
raft: no
thingiverse
free
Rotated Top-TL for Full Sized Halo Plasma Pistol by ChaosCoreTech by ryonsherman
... halo plasma pistol by chaoscoretech by ryonsherman
thingiverse
part rotated on y axis -0.45° to lay flat on the build platform.
thingiverse
free
Hoothoot [Pokemon] by ChaosCoreTech
...
print settings:
printer: xyzprinting da vinci 1.0 pro
filament: hatchbox pla
layer height: 0.1mm
infill: 20%
supports/raft: yes
Robot
3d_ocean
$20
Robot
...robot
3docean
character metal robot robot robotic white
robot model for 3dsmax 2009 and greater
3d_ocean
$45
Robot
...robot
3docean
fighing machine robot
a fighting robot from the scrapyard.
3d_ocean
$18
Robot
...robot
3docean
machin robot science fiction
high poly robot.
3d_export
$7
Robot
...robot
3dexport
robot
3d_export
$5
robot
...robot
3dexport
robot
3d_export
free
Robot
...robot
3dexport
robot
turbosquid
$10
Robot/ Alien Robot
...
royalty free 3d model robot/ alien robot for download as max on turbosquid: 3d models for games, architecture, videos. (1442828)
3d_export
$5
robot
...robot
3dexport
robot in blender
3ddd
$1
robot
...robot
3ddd
робот
robot
3ddd
$1
Robot
...robot
3ddd
робот
robot
Fully
turbosquid
$50
Drone fully rigged
...
royalty free 3d model drone fully rigged for download as max on turbosquid: 3d models for games, architecture, videos. (1282280)
turbosquid
$12
FULLY PARAMETRIC CHAIR
...alty free 3d model fully parametric chair for download as rvt on turbosquid: 3d models for games, architecture, videos. (1280209)
turbosquid
$10
firetruck-fully-rigged
...yalty free 3d model firetruck-fully-rigged for download as ma on turbosquid: 3d models for games, architecture, videos. (1653811)
turbosquid
$6
Fully rigged character
...ty free 3d model fully rigged character for download as blend on turbosquid: 3d models for games, architecture, videos. (1486076)
turbosquid
$3
Fully Rigged shark
...ee 3d model fully rigged 3d shark model for download as blend on turbosquid: 3d models for games, architecture, videos. (1517695)
turbosquid
$75
Fully Customizable Hospital
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
free
Fully Rigged Link
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
design_connected
$16
Troy W Fully Covered
...troy w fully covered
designconnected
magis troy w fully covered computer generated 3d model. designed by wanders, marcel.
cg_studio
$99
Pepe fully rigged3d model
...ully rigged3d model
cgstudio
.max - pepe fully rigged 3d model, royalty free license available, instant download after purchase.
3d_export
$60
Ankylosaur 8K - fully animated
...ankylosaur 8k - fully animated
3dexport
Wall
turbosquid
$5
Wall and UDK Wall
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
archibase_planet
free
Wall
...wall
archibase planet
batten wall plywood partition
batten wall - 3d model for interior 3d visualization.
3d_ocean
$5
Wall
...wall
3docean
low polgon wall low stone old wall stone wall
2048*2048 tex obj,fbx,blend format. low polygon. game ready.
3ddd
$1
wall
...wall
3ddd
камень , кладка
damaged stone wall
3d_export
$5
wall
...wall
3dexport
room with a wall with doors made of wood and leather
3ddd
$1
WALL FREAMS
...wall freams
3ddd
wall freams
wall freams
3ddd
$1
WALL-E
...wall-e
3ddd
wall-e , робот
wall-e
3ddd
$1
WALL PANNEL
...wall pannel
3ddd
панель
wall pannel for enterance wall.
3d_export
$18
great wall-city wall-dianjiangtai
...great wall-city wall-dianjiangtai
3dexport
great wall-city wall-dianjiangtai<br>3ds max 2015
turbosquid
$5
Wall
...wall
turbosquid
royalty free 3d model wall for download as on turbosquid: 3d models for games, architecture, videos. (1522889)
E
3ddd
$1
WALL-E
...wall-e
3ddd
wall-e , робот
wall-e
3d_export
$100
e-rickshaw
...e-rickshaw
3dexport
e-rickshaw- it have 3d model of passenger e-rickshaw
3d_ocean
$12
Wall E
...wall e
3docean
character robot wall e
its a 3d model of wall e….
turbosquid
$68
Model-E Droids 2-E Q-E Star Wars
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
cg_studio
$45
Model-E Droids 2-E Q-E Star Wars3d model
....3ds .c4d .obj .vue - model-e droids 2-e q-e star wars 3d model, royalty free license available, instant download after purchase.
3d_export
$100
e-rickshaw
...e-rickshaw
3dexport
e-rickshaw design for passenger it have all mechanical component
design_connected
$7
Cone E
...cone e
designconnected
bonaldo cone e computer generated 3d model. designed by pasini, ennio.
3ddd
$1
Wall-E NEW
...wall-e new
3ddd
wall-e , робот
wall-e
design_connected
$29
Extrasoft E
...extrasoft e
designconnected
living divani extrasoft e computer generated 3d model. designed by lissoni, piero.
3ddd
$1
E-Turn
... скамейка
современная скамейка фирмы kundalini.
модель e-turn.
дизайнер brodie neil.
размеры: h 42 cm l 185 cm w 54 cm
Printed
design_connected
$27
...print
designconnected
moroso print computer generated 3d model. designed by wanders, marcel.
3ddd
free
Eichholtz Prints
...- eichholtz print central station i
13 - eichholtz print central station ii
14 - eichholtz print marisa
15 - eichholtz print tish
3ddd
$1
Eichholtz Prints
...print abstract - set of 2
10 - eichholtz print orange abstract
11 - eichholtz print buddha right
12 - eichholtz print buddha left
turbosquid
$1
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3ddd
free
Eichholtz Prints
...of 4
2 - print dunbar 2 set of 4
3 - print guadeloupe 1 set of 4
4 - print guadeloupe 2 set of 4
5 - print giles
6 - print trett
3ddd
$1
Eichholtz Prints
...nt tutti frutti
3 - eichholtz prints watson - set of 2
4 - eichholtz prints antique nautilus - set of 2
5 - eichholtz print tiara
3d_export
$5
Monster for printing
...monster for printing
3dexport
monster 3d model printing
3ddd
free
printed rug
...printed rug
3ddd
ковер
very creative printed rug
3ddd
free
Eichholtz Prints
...иал: бумага
габариты (вхш): 72 x 62 см
описание: print sweetmeat - постер в деревянной раме.
3 - prints varsity set of 2
арти
3ddd
free
Art Print Posters
...art print posters
3ddd
прованс
art print posters by patrician prints