Walking Dead - Dead Inside Box by wjordan819

Last crawled date: 3 years ago

Although completely satisfied with the journal I created. My son soon suggested that I should make the doors open individually. As a book this would be very difficult and complicated to do, so I created a box.
I have reworked my original design. The handles in the original proved to be too thin and broke when I tried to insert the wood beam. I have since improved this, but have not yet printed the new design.
As with the original you will need to use supports for the handles.
Some assembly is required. the door frame needs to be glued to the box and the doors slotted into place.
to finish off, i grabbed a pic of the internet to stick in the bottom of the box.
############PLEASE NOTE:-############
although i have provided an STL for the whole thing it is not intended to be printed in this way and should be printed in it's individual parts.
Sorry if i caused any confusion
##############UPDATE################
I have now managed to print the doors and can comfirm that once the support material is fully removed the beam fits perfectly.