Thingiverse
WAGO 221-412 Stepper Motor Mount by joochung
by Thingiverse
Last crawled date: 3 years, 1 month ago
UPDATE 8/8/2018
Added a 'B' version with wire strain relief tabs at the top.
This mount can hold 8 x WAGO 221-412 blocks. These are the 2 conductor blocks. So thats a total of 4 pairs. I designed this mainly to mount onto the extruder stepper motor. With the 4 pairs of wires of conductors, it can handle the hotend thermistor, the hotend heater cartridge, the extruder fan, and the parts fan.
This is a remix of my basic WAGO 221 mounts. There are 6mm x 2mm wide holes in the base of the mount for zip ties. The intent was to zip tie the mount to the extruder motor. This makes it easy and flexible with minimal filament required. And everyone has zip ties.
The end with the loops is the top. The end without the loops is the bottom. You can see from the picture that the zip tie goes up the bottom and out the back of the mount. It doesn't go out the top of the mount. The holes were positioned for stepper motors with 42.25mm square cases.
The spacing between the two middle rows of blocks is pretty tight. With my fat fingers, its hard to open and close the levers. So I use a small flat head screw driver.
Added a 'B' version with wire strain relief tabs at the top.
This mount can hold 8 x WAGO 221-412 blocks. These are the 2 conductor blocks. So thats a total of 4 pairs. I designed this mainly to mount onto the extruder stepper motor. With the 4 pairs of wires of conductors, it can handle the hotend thermistor, the hotend heater cartridge, the extruder fan, and the parts fan.
This is a remix of my basic WAGO 221 mounts. There are 6mm x 2mm wide holes in the base of the mount for zip ties. The intent was to zip tie the mount to the extruder motor. This makes it easy and flexible with minimal filament required. And everyone has zip ties.
The end with the loops is the top. The end without the loops is the bottom. You can see from the picture that the zip tie goes up the bottom and out the back of the mount. It doesn't go out the top of the mount. The holes were positioned for stepper motors with 42.25mm square cases.
The spacing between the two middle rows of blocks is pretty tight. With my fat fingers, its hard to open and close the levers. So I use a small flat head screw driver.
Similar models
thingiverse
free
WAGO 221-412 Stepper Motor Hole Mount by jonzynator
...nt one in the location on my ender 3's extruder motor mount. being i removed it for my hemera it was a great location for it.
grabcad
free
Wago 221-412 2 Wire Lever-Nut
...wago 221-412 2 wire lever-nut
grabcad
wago 221-412 2 wire connector / wire nut, end splice.
thingiverse
free
Robo R1 Extruder Stepper Tie Wrap Fixture by shingabiss
...tor and has slots for tie wraps to bundle hotend wires as well as ends that are used to secure it to the stepper with a tie wrap.
grabcad
free
Tri-Wago
...
inline holder for 3 lever nuts (wago 221-612) for brushless dc motor. with 3 optional mount or zip tie holes on 1 in. spacing.
thingiverse
free
Layer fan bracket/duct by jonahblackwell24
...hine or #8 wood screws to attach the 40x40mm fan to the bracket. the holes for mounting the fan are arranged in a 32x32mm square.
thingiverse
free
Dual RJ45 + WAGO 221-412 Breakout Case by joochung
...onfig.
i think this design is very space efficient and light. it should be well suited to a number of different printer styles.
thingiverse
free
E3D Titan Aero Part Cooling 40x20mm Blower Fan Mount and Shroud by NorcoT
...otend to allow for silicone heater block cover. removed 1 of the fan screw holes. added a tab/hole for cable tie point for wires.
thingiverse
free
DPS600PB Wago mount by Miko99
...dps600pb wago mount by miko99
thingiverse
2x wago 221 412
2x wago 221 413
thingiverse
free
Wago 221-412/413/415 Holder/Mount (2019 version) by thingster
...s are supported:
wago 221-412
wago 221-413
wago 221-415
i also made a design for the older (but still available) wago 222 series.
thingiverse
free
E3d upgrade for Wombot Exllis by Paul3163
...y screws from jaycar.
design files are included
40mm fan adaptor was from the link belowhttps://www.thingiverse.com/thing:2572641
Joochung
thingiverse
free
JCC Maker Coin by joochung
...jcc maker coin by joochung
thingiverse
my maker coin.
thingiverse
free
Temp CalibrationTower by joochung
...rked from 0 to 9. lines to mark each block. each block is 10mm tall. minor test of overhangs and bridging. minor test of ringing.
thingiverse
free
MKS SBASE v1.3 case by joochung
...giverse
update 4/19/2017 - added version with m5 tabs to mount onto a 2020 extrusion.
a case i designed for the mks_sbase v1.3.
thingiverse
free
Adjustable Rod Clamp by joochung
...n an 8mm threaded rod. it works well. it requires a ~ 30mm m3 bolt. the thumbwheel can be used to adjust the position of the nut.
thingiverse
free
Acaia Lunar Riser by joochung
...ttom of the pf. should reduce heat lost by the espresso as it falls into the cup. it should also help reduce splatter in the cup.
thingiverse
free
Wanhao Di3 Tool Holder by joochung
...xed a mount to include more holes for my flush cutters and mini pliers and also hooks for the putty knife and a pair of scissors.
thingiverse
free
8mm rod clamp by joochung
...39;t like any of the other clamps i saw so i made my own. it has a 7.75mm center hole so that it can clamp onto the 8mm rod well.
thingiverse
free
Mazzer Grinder Doser Egg by joochung
... it neat and clean.
i would recommend you print with a brim instead of a skirt to give the first 10mm or so better bed adhesion.
thingiverse
free
E-ZPass Flex Transponder Case by joochung
...isor clip mount, rearview mirror mount, etc... for people who don't want to actually stick one more item on their windshield.
thingiverse
free
2020 Spool roller w/ 608 bearing and no bolts by joochung
...a hole so it could be mounted on top of a 2020 aluminum extrusion. the hole is s sized for a m3 bolt. so use a comparable m3 nut.
412
design_connected
$16
Cab 412
...cab 412
designconnected
cab 412 computer generated 3d model. designed by bellini, mario.
3ddd
$1
Cassina 412 CAB
...cassina 412 cab
3ddd
cassina
cassina 412 cab
turbosquid
$19
Gispen 412
...ee 3d model gispen 412 for download as max, obj, 3ds, and fbx on turbosquid: 3d models for games, architecture, videos. (1698105)
3ddd
$1
Komfort 412
...komfort 412
3ddd
om , стул
bnos ukraine
3ddd
$1
Gispen 412
...937 году и до сих пор производится голландской компанией gispen.http://www.goodmax.ru/producers/gispen/art/ngispen.html
evermotion
$24
Bell 412 am73
... helicopter with all textures, shaders and materials. it is ready to use, just put it into your scene. evermotion 3d models shop.
3d_export
$40
Bell 412 helicopter 3D Model
...bell 412 helicopter 3d model
3dexport
bell 412 helicopter
bell 412 helicopter 3d model evermotion 92774 3dexport
turbosquid
$48
Handgun MP-412
...ree 3d model handgun mp-412 for download as max, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1279657)
turbosquid
$48
AZLK 412 Moskvitch
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$28
MP-412 Rex
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
221
turbosquid
$18
plants 221
...
royalty free 3d model plants 221 for download as max and obj on turbosquid: 3d models for games, architecture, videos. (1465636)
design_connected
$16
KT-221 Armchair
...kt-221 armchair
designconnected
de sede kt-221 armchair computer generated 3d model. designed by thut, kurt.
3d_export
$30
Villa 221 3D Model
...villa 221 3d model
3dexport
villa 221 3d model freebird 49466 3dexport
3ddd
free
Sigma A 221
... regal , статуэтка
the regal collection. sigma.
turbosquid
$7
Rug Set 221
...y free 3d model rug set 221 for download as max, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1497434)
turbosquid
$2
Decorative panel 221
... model decorative panel 221 for download as max, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1461244)
turbosquid
free
Geometric Shape 221
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
design_connected
$11
KT-221 Coffee Table
...kt-221 coffee table
designconnected
de sede kt-221 coffee table computer generated 3d model. designed by thut, kurt.
design_connected
$16
Salon Side M-221
...designconnected
mcguire furniture company salon side m-221 chairs computer generated 3d model. designed by orlando diaz - azcuy.
3d_export
$55
Lobby 221 3D Model
... entrance hall antechamber vestibule entry foyer business centre office center building
lobby 221 3d model pupuhol 56200 3dexport
Wago
thingiverse
free
WAGO Holder by cosmowave
...e
this holder is for wago-terminals.
available with 88mm, 106mm and 115mm gap.
you can glue your wago-terminals on this holder.
thingiverse
free
WAGO-in-box by Ghiotto
...wago-in-box by ghiotto
thingiverse
wago 5x2 + 3x3 stand inside electric box
thingiverse
free
Wago Hutschienenadapter by Son_Goku_2
...wago hutschienenadapter by son_goku_2
thingiverse
wago hutschienenadapter
keine fliegenden klemmen mehr im verteiler
thingiverse
free
Wago Base (knockoff wago) by l1mb0
...r the producthttps://www.ebay.com/itm/10-pcs-2-3-wege-klemme-wagoklemmen-verbindungsklemme-hebel-klemmen-dosenklemme/193765655994
thingiverse
free
DPS600PB Wago mount by Miko99
...dps600pb wago mount by miko99
thingiverse
2x wago 221 412
2x wago 221 413
thingiverse
free
Wago terminal 221 holder / Wago Klemmenhalter für 221 by Boschlike
...alter für 221 by boschlike
thingiverse
wago terminal holder for 3 pin 221 terminal / wago klemmenhalter für 3-polige 221 klemme
thingiverse
free
WAGO 221 Hutschienenmontage by 13HN1904
...o 221 hutschienenmontage by 13hn1904
thingiverse
wago hutschienenmontage auch zu finden auf.:https://wago-creators.com/design/95
thingiverse
free
Wago Holder by Overnau
...s wago holder to the wires.
hope it will help to solve coller connecton problem without soldering.
have a good and stable prints.
thingiverse
free
Wago modular accessory / Wago accessoire modulaire by boxplyer
...e.
epaisseur de couche 0.3
epaisseur de coque 0.6
taux de remplissage 25
température d'impression 220c°
type de support aucun
thingiverse
free
Wago Holder 2 by Overnau
...from the holder.
hope it will help to solve coller and hotend connecton problem without soldering.
have a good and stable prints.
Stepper
turbosquid
$85
Stepper
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_ocean
$22
Mini Stepper
...gymnastic indoor legs machine mini silver sport stepper trainer workout
3d model of silver and black mini stepper with a counter.
turbosquid
$3
stepper deluxe
...osquid
royalty free 3d model stepper deluxe for download as on turbosquid: 3d models for games, architecture, videos. (1284335)
turbosquid
$49
Stepper Motor
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$5
Fitness Stepper
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$1
stepper motor driver
...stepper motor driver for download as , fbx, dae, obj, and stl on turbosquid: 3d models for games, architecture, videos. (1688860)
turbosquid
$1
Stepper motor driver
... model stepper motor driver for download as obj, stl, and ige on turbosquid: 3d models for games, architecture, videos. (1577811)
3d_export
$5
Stepper motor Nema17 17HS4401
...stepper motor nema17 17hs4401
3dexport
turbosquid
$1
Nema 17 Stepper motor
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$1
Nema 17 Stepper Motor 59Nm
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
Motor
archibase_planet
free
Motor
...base planet
motor motor engine engine electric motor
motor wagner n250213 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Motor
...motor
archibase planet
motor motor engine engine
motor n151112 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Motor
...motor
archibase planet
motor motor engine engine
motor n150615 - 3d model (*.gsm+*.3ds+*.max) for interior 3d visualization.
turbosquid
$15
Motor
...otor
turbosquid
royalty free 3d model motor for download as on turbosquid: 3d models for games, architecture, videos. (1639404)
3d_ocean
$5
Electric motor
...electric motor
3docean
car electric engine industry motor phase train vehicle
an electric motor enjoy!
3d_ocean
$18
Electric Motor
...electric motor
3docean
electric motor engine machine mover parts
3d model electric motor for hoist crane
turbosquid
$29
Motor
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$5
Motor
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_export
$5
electric motor
...electric motor
3dexport
electric motor use for industrial purposes
3d_export
$5
servo motor
...tor
3dexport
it's a simple part of servo motor 0.75kw for used in machines assembly to show specified motor in own project.
Mount
3d_export
free
mounting bracket
...mounting plate is the portion of a hinge that attaches to the wood. mounting plates can be used indoors, cabinetry and furniture.
turbosquid
$2
MOUNTING
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
free
Mounts
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
free
Mount Fuji
...fuji
turbosquid
free 3d model mount fuji for download as obj on turbosquid: 3d models for games, architecture, videos. (1579977)
3d_export
$5
Headphone mount LR
...headphone mount lr
3dexport
headphone mount l+r
turbosquid
$39
Mount rainier
...quid
royalty free 3d model mount rainier for download as fbx on turbosquid: 3d models for games, architecture, videos. (1492586)
turbosquid
$5
pipe mounting
...quid
royalty free 3d model pipe mounting for download as obj on turbosquid: 3d models for games, architecture, videos. (1293744)
turbosquid
$3
Mounting Tires
...uid
royalty free 3d model mounting tires for download as fbx on turbosquid: 3d models for games, architecture, videos. (1708511)
3d_export
$5
Magnetic GoPro Mount
...pro mount
3dexport
cool magnetic mount for gopro. allows you to mount the camera on flat metal surfaces and get exclusive shots.
turbosquid
$5
Stone Mount
...ty free 3d model stone mount for download as ma, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1370306)