Wacom Pen Holder For Kinesis Advantage by nemrod

Last crawled date: 3 years ago

If you, like me, are using a Wacom Bamboo or Intuos Pro tablet in combination with a Kinesis Advantage keyboard, then this might interest you.
This is pen holder hooks into the middle screw hole under the Kinesis and snaps into the seam and top edge of the keyboard to stay put. This way it will never get in the way like a holder standing on the desk would; with the clearance to the desk the edge of the tablet even goes under it making it possible to keep the tablet and keyboard as close together as they can go. It's designed to hold the pen at an angle to make it easy to get and put back, and the fit is good enough for it not to fall out easily.
Depending on material/tolerances/printer you might need to put a bit of double-sided tape between the holder and the keyboard to make sure it doesn't come loose if too much force is exerted (mine snaps into place and can hold the pen no problem, but I put some tape there just to be sure).
If you find you need to adjust the measurements for your setup all the variables are set in the beginning of the SCAD file so it's pretty straightforward to adjust, or you can use the Customizer to do the same thing.