VTAIL Mini 295 by Kawobei

Last crawled date: 3 years, 1 month ago

This is not my design I have just cut it out of carbon fiber instead of printing it.
original go here:https://forums.openpilot.org/topic/42022-v-tail-quadcopter-open-source/
Legs are from:http://www.thingiverse.com/thing:596820
Body and Arms 2mm CF
Supports are 1.5mm CF
Body uses M3 screws and locknuts
outer arms use 2.5mm screws and locknuts
This has Cobra 2204/2300kv motors with 6 inch props with a 1300mah 4S
The flight controller is a Sparky 2 using onboard OpenLRS running Taulabs http://taulabs.org/