Thingiverse
VS-50 AP Mine (Historical Prop) by mussy
by Thingiverse
Last crawled date: 3 years ago
The VS-50 is a circular plastic cased anti-personnel blast mine, formerly manufactured by the now-defunct Valsella Meccanotecnica SpA, an Italian high-tech defence industry specialized in area denial systems which was also the manufacturer of the Valmara 69 and one of the first industries in the world to implement plastic construction for landmines. The design is similar to the TS-50 and VS-MK2 mine. It is blast resistant and can be used in a minimum metal configuration. Though unlikely to kill, the explosive charge contained within a VS-50 is quite sufficient to destroy the victim's foot: the blast is capable of penetrating 5 mm of mild steel leaving an 80 mm-diameter hole.
Description:
The mine consists of three sections, a bottom section containing the main explosive charge, a middle section which contains the fuze and safety/arming mechanism, and the top section which consists of a neoprene pressure pad. The neoprene pressure pad is sometimes reinforced with an 18 gram mild steel plate, which makes the mine detectable by metal detectors. However, the majority of VS-50s were manufactured as minimal metal mines and are therefore much harder to detect. The case is waterproof and can be used in water up to one metre deep. The mine can be deployed by helicopters or ground vehicles or laid by hand.
Operation:
A sustained downward force of approximately ten kilograms on the pressure plate for a minimum of 0.10 seconds compresses the firing spring and cocks the striker. Continuous downward movement allows the trigger assembly to pivot, slowly forcing the air out of an anti-shock bladder and flips the striker down into the stab sensitive M41 detonator, at which point the mine explodes.
The air pressure delay mechanism effectively blocks detonation if the force on the pressure plate is of short duration, because air does not have enough time to leave the small anti-shock bladder. This has two direct applications, it allows the mine to be dropped from helicopter mine scattering systems, and it dramatically increases the mine's resistance to explosive-based mine clearance techniques. It can therefore be regarded as a blast resistant mine.
VS-50AR & VS-AR4 anti-handling devices:
The VS-50AR is an electronically fuzed version of the mine which contains an integral mercury tilt switch, that operates as an anti-handling device. The VS-50AR has a dummy pressure plate on top and its external appearance is very similar to the VS-50, which has obvious implications for demining personnel. The VS-50AR contains a reduced explosive charge, but which is still sufficient to blow the victim's hands off.
Additionally, Valsella manufactured a completely separate electronic anti-handling device known as the VS-AR4. This was a tilt-operated device, specifically designed to be fitted to any of the following Valsella products: the VS-50 (standard version, not the VS-50AR) and Valmara 69 anti-personnel mines, as well as the VS-1.6 and VS-1.2 anti-tank mines. The VS-AR4 has a series of fuze adaptors which allow it to be screwed into the bottom of any of those mines. It has a 10-minute mechanical arming delay (started by removing a pin) followed by a 30-minute electronic arming delay. The power source are two 1.5 V batteries and the operational life is longer than a year.
Generally, the render safe procedure for VS-50 mines with anti-handling devices fitted is to detonate them in situ via a donor charge, or burn through the plastic casing using some form of special incendiary device.
Countries used in:
The mine has been encountered in Afghanistan, Angola, Ecuador, Iraq, Turkey, Kuwait, Lebanon, Peru, Rwanda, Sri Lanka, the Western Sahara and Zimbabwe.
Produced by
Italy
Iran
Egypt
Singapore [1]
Sweden
Specifications:
Weight: 185 g
Explosive content: 43 g of phlegmatized RDX (i.e. RDX and paraffin wax)
Diameter: 90 mm
Height: 45 mm
Operating pressure: 10 kg
Variants:
VS-50 EO3 - version fitted with an electronic anti-handling device.
SPM-1 - copy produced under licence in Singapore.
YM-IB - copy produced by Iran
T/79 - copy produced by Egypt
References:
Jane's Mines and Mine Clearance
VS-50 at ORDATA
VS-50AR with electronic anti-handling device at ORDATAhttp://www.the-monitor.org/index.php/publications/display?url=lm/2004/singapore.html Landmine and Cluster Munition Monitor: Singapore
!Don't forget to check out my other Cool designs and Follow my weekly KooKoo uploads, Enjoy ;)
Description:
The mine consists of three sections, a bottom section containing the main explosive charge, a middle section which contains the fuze and safety/arming mechanism, and the top section which consists of a neoprene pressure pad. The neoprene pressure pad is sometimes reinforced with an 18 gram mild steel plate, which makes the mine detectable by metal detectors. However, the majority of VS-50s were manufactured as minimal metal mines and are therefore much harder to detect. The case is waterproof and can be used in water up to one metre deep. The mine can be deployed by helicopters or ground vehicles or laid by hand.
Operation:
A sustained downward force of approximately ten kilograms on the pressure plate for a minimum of 0.10 seconds compresses the firing spring and cocks the striker. Continuous downward movement allows the trigger assembly to pivot, slowly forcing the air out of an anti-shock bladder and flips the striker down into the stab sensitive M41 detonator, at which point the mine explodes.
The air pressure delay mechanism effectively blocks detonation if the force on the pressure plate is of short duration, because air does not have enough time to leave the small anti-shock bladder. This has two direct applications, it allows the mine to be dropped from helicopter mine scattering systems, and it dramatically increases the mine's resistance to explosive-based mine clearance techniques. It can therefore be regarded as a blast resistant mine.
VS-50AR & VS-AR4 anti-handling devices:
The VS-50AR is an electronically fuzed version of the mine which contains an integral mercury tilt switch, that operates as an anti-handling device. The VS-50AR has a dummy pressure plate on top and its external appearance is very similar to the VS-50, which has obvious implications for demining personnel. The VS-50AR contains a reduced explosive charge, but which is still sufficient to blow the victim's hands off.
Additionally, Valsella manufactured a completely separate electronic anti-handling device known as the VS-AR4. This was a tilt-operated device, specifically designed to be fitted to any of the following Valsella products: the VS-50 (standard version, not the VS-50AR) and Valmara 69 anti-personnel mines, as well as the VS-1.6 and VS-1.2 anti-tank mines. The VS-AR4 has a series of fuze adaptors which allow it to be screwed into the bottom of any of those mines. It has a 10-minute mechanical arming delay (started by removing a pin) followed by a 30-minute electronic arming delay. The power source are two 1.5 V batteries and the operational life is longer than a year.
Generally, the render safe procedure for VS-50 mines with anti-handling devices fitted is to detonate them in situ via a donor charge, or burn through the plastic casing using some form of special incendiary device.
Countries used in:
The mine has been encountered in Afghanistan, Angola, Ecuador, Iraq, Turkey, Kuwait, Lebanon, Peru, Rwanda, Sri Lanka, the Western Sahara and Zimbabwe.
Produced by
Italy
Iran
Egypt
Singapore [1]
Sweden
Specifications:
Weight: 185 g
Explosive content: 43 g of phlegmatized RDX (i.e. RDX and paraffin wax)
Diameter: 90 mm
Height: 45 mm
Operating pressure: 10 kg
Variants:
VS-50 EO3 - version fitted with an electronic anti-handling device.
SPM-1 - copy produced under licence in Singapore.
YM-IB - copy produced by Iran
T/79 - copy produced by Egypt
References:
Jane's Mines and Mine Clearance
VS-50 at ORDATA
VS-50AR with electronic anti-handling device at ORDATAhttp://www.the-monitor.org/index.php/publications/display?url=lm/2004/singapore.html Landmine and Cluster Munition Monitor: Singapore
!Don't forget to check out my other Cool designs and Follow my weekly KooKoo uploads, Enjoy ;)
Similar models
grabcad
free
VS-50 AP Mine (Historical Prop)
...to implement plastic construction for landmines. the design is similar to the ts-50 and vs-mk2 mine. it is blast...
thingiverse
free
Valmara 69 AP Mine (Historical Prop) by mussy
...m- 10 kg push or 6 kg pull
!don't forget to check out my other cool designs and follow my daily dose kookoo uploads, enjoy ;)
grabcad
free
Valmara 69 AP Mine (Historical Prop)
...- 10 kg push or 6 kg pull
!don't forget to check out my other cool designs and follow my daily dose kookoo uploads, enjoy ;)
grabcad
free
PMN AP MINE (Historical Prop)
...perating pressure: 5.8 kg
!don't forget to check out my other cool designs and follow my daily dose kookoo uploads, enjoy ;)
cg_trader
$7
Grenade | 3D
... and ignites the fuze (sometimes called the delay element). the fuze burns down to the detonator, which explodes the main charge.
grabcad
free
C3 ELSIE AP MINE (Historical Prop)
...ports or raft required.
!don't forget to check out my other cool designs and follow my daily dose of kookoo uploads, enjoy ;)
cg_trader
$8
PMN-2 - high-explosive anti-personnel pressure action
...ses can cause severe burns to the lower extremities. death can result from painful shock or blood loss due to untimely first aid.
cg_trader
free
Granade F1
...r and the grenade is approximately 600 grams. bomb grenade weapon war explosion army military mine dynamite blasting combat other
cg_trader
$27
grenade f1
... variants are available which give delays between zero (i.e., instantaneous) and 13 seconds, specifically for use in booby-traps.
grabcad
free
P.R.O.M-1 YUGOSLAVIAN LAND MINE (Historical Prop)
...into the top of the mine. it is broadly similar in operation to the german s-mine. the mine is...
Mussy
turbosquid
$20
Pouf MUSSI Papeete
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3ddd
$1
KAN-GURA MUSSI ITALY srl MARCH 2008 P63
... mussi , кушетка
kan-gura mussi italy srl march 2008 p63
3ddd
$1
Pouf MUSSI Papeete
...pouf mussi papeete
3ddd
пуф
3ds max 2010.v-ray 2.40.03.file formats fbx,obj
cg_studio
$18
Pouf MUSSI Papeete3d model
...ior materials poly
.obj .fbx .max - pouf mussi papeete 3d model, royalty free license available, instant download after purchase.
3ddd
$1
Пуф Contemporary ottoman PAPEETE
...ditable poly.
127 тысяч полигонов, 65 тысяч вершин.
текстура ткани высокого разрешения (3k) собственного производства.
mr.spoilt
thingiverse
free
Mussy Pistol Lower ;) by mussy
...mussy pistol lower ;) by mussy
thingiverse
this is not a glock lol
thingiverse
free
Ballistic Plunger (Mussy Design) by mussy
...llistic plunger (mussy design) by mussy
thingiverse
this is a fun version of the russian special forces ballistic knife ...enjoy
thingiverse
free
CRAZY CROSSBOW (Mussy Design) by mussy
... by mussy
thingiverse
https://www.youtube.com/watch?v=0qmlghptuuu
not ready yet
don't forget to check out my other designs !
thingiverse
free
AIM-CAM Mussy Design by mussy
...ingiverse
this is air soft p-rail compatible cam recorder housing, in short you can record what you shoot at ..... enjoy.... ;)
thingiverse
free
Test Tube Holder Mussy Design by mussy
... tube holder mussy design by mussy
thingiverse
this is a simple 10 mm test tube holder no need for any supports , enjoy peeps :)
Vs
turbosquid
$1
zombie vs plants
...quid
royalty free 3d model zombie vs plants for download as on turbosquid: 3d models for games, architecture, videos. (1273094)
3d_export
$110
Chopper VS 3D Model
...chopper vs 3d model
3dexport
chopper swiss motorcycle vallis
chopper vs 3d model binozibi 90821 3dexport
turbosquid
$25
Palestine vs Israel
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$10
Robo vs bones
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$10
Work VS-XX
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_ocean
$2
Batman vs superman
... batman vs superman black cool design logo low poly red simple suprman
attention ; vray is nedded (“materials created with vray”)
archive3d
free
VS-Mebel Library 3D Model
...vs-mebel library 3d model
archive3d
vs-mebel gdl gsm parametric
3ddd
free
Hinkley Zelba 7 VS
... 7 vs
описание товара
размер: d=925, h=910 мм
артикул: zelda7 vs
производитель: hinkley
коллекция: zelda
цвет: винтажное золото
turbosquid
free
Star vs Evil Wand
...rbosquid
free 3d model star vs evil wand for download as obj on turbosquid: 3d models for games, architecture, videos. (1325748)
3d_export
$25
Vitesse VS 1115 3D Model
...vitesse vs 1115 3d model
3dexport
vitesse vs 1115 3d model viktor.arch.199087624 88394 3dexport
Ap
design_connected
$11
AP
...ap
designconnected
lapalma ap computer generated 3d model. designed by azumi, shin.
turbosquid
$5
APS
...ty free 3d model aps for download as obj, fbx, blend, and dae on turbosquid: 3d models for games, architecture, videos. (1195340)
turbosquid
$95
aps
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
design_connected
$13
Marylin AP
...marylin ap
designconnected
axo light marylin ap wall lights computer generated 3d model. designed by manuel vivian.
turbosquid
$1
Ape sculpture
...yalty free 3d model ape sculpture for download as max and ztl on turbosquid: 3d models for games, architecture, videos. (1488917)
3ddd
$1
SVEN AP-520
...sven ap-520
3ddd
sven , наушники
наушники sven ap-520
3d_export
$35
APS 3D Model
...techkin semi-automatic weapon оружие пистолет асп стечкин автоматический полуавтоматический
aps 3d model starblaze 70860 3dexport
turbosquid
$39
Ape Beast
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$20
APS modified
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$3
AP Pistol
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
Historical
3ddd
free
historical classic column
... historical , wooden
historical classic column for interior scenes
3ddd
$1
Annibale Colombo | Historical.
...ddd
annibale colombo , historical
диван annibale colombo. historical. 95x184x74
turbosquid
$2
Historical Stone
...ty free 3d model historical stone for download as obj and mud on turbosquid: 3d models for games, architecture, videos. (1211652)
turbosquid
$20
Historic House
...ree 3d model historic house for download as max, fbx, and obj on turbosquid: 3d models for games, architecture, videos. (1634729)
turbosquid
$120
Historical Vikingship
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$89
historical bridge
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$49
historical building
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$49
Historical building
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$39
Historical building
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$35
historical buildings
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
Prop
3ddd
$1
Props
...props
3ddd
props
3d_ocean
$10
Props
...ject you need this props design this 6 taype for props to get your design perfect and nice file include : 1 max 2 obj 3 3ds 4 zip
turbosquid
$15
Props
...s
turbosquid
royalty free 3d model props for download as max on turbosquid: 3d models for games, architecture, videos. (1249032)
turbosquid
$1
PROPS
...d model props for download as unitypackage, obj, fbx, and tga on turbosquid: 3d models for games, architecture, videos. (1627660)
turbosquid
$5
props
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
free
PROP
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3ddd
$1
kids props
...kids props
3ddd
декоративный набор
kids props
3d_ocean
$8
Street props
...l barrier prop roads street street prop
street props game models barrel barrier roads aircos jerrycan models fbx obj and max file
turbosquid
$39
Apocalyptic Props
...uid
royalty free 3d model apocalyptic props for download as on turbosquid: 3d models for games, architecture, videos. (1380028)
turbosquid
$1
Bunker props
...rbosquid
royalty free 3d model bunker props for download as on turbosquid: 3d models for games, architecture, videos. (1196014)
50
3d_export
$500
50
...50
3dexport
flanged ball valve dn 50 detailed made in compass 17
3ddd
free
Life 50-50-170
...life 50-50-170
3ddd
life
автор модели: aroslon
3ddd
$1
Pillows 50
...pillows 50
3ddd
подушка
pillows 50
turbosquid
$27
50
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_export
$18
plants 50
...plants 50
3dexport
plants 50 is a monstera plants or swiss cheese plant,, best suit in both indoor and outdoor.
3d_export
$17
Sukhoi T-50
...sukhoi t-50
3dexport
sukhoi t-50
3ddd
$1
Aqwella Espresso 50
...aqwella espresso 50
3ddd
aqwella espresso 50
3ddd
$1
ELEYUS LINE 50
...тяжка , eleyus
вытяжка eleyus, модель eleyus line 50 ( белый, коричневый) ширина - 50 см
turbosquid
$99
AMX-50
...
turbosquid
royalty free 3d model amx-50 for download as fbx on turbosquid: 3d models for games, architecture, videos. (1521461)
turbosquid
$6
Bedcloth 50
...osquid
royalty free 3d model bedcloth 50 for download as max on turbosquid: 3d models for games, architecture, videos. (1522738)