Thingiverse
VRProtect for HTC Vive by snowzach
by Thingiverse
Last crawled date: 3 years ago
This is a snap in perscription (or possibly non-perscription) lens adapter system for the HTC Vive that takes a common set of lenses you can order online cheaply from zenni.com. There is a frame piece that it held in with friction and then a lens portion that snaps to the frame using magents. This allows you to easily change out the perscription or remove the lenses entirely for those that don't need them. The frame portion acts as a scaffolding above the lenses to protect them if you don't have a lens installed.
If you want this printed for you, I have it on shapeways: https://www.shapeways.com/shops/pzdesigns
Parts
You need both a lens and a frame piece printed out. Lenses obtained from a pair of perscription Zenni.com glasses and 6 magnets.
Frame and Lens STL Files
There are now two different versions of the STL. There is a 40mm version and a 43mm version. All things being equal, I haven't really noticed a diffence between the 40mm or the 43mm version. If your IPD is on the high end, you may see some benefit from the 43mm version. The glasses from Zenni are the same price so it probably doesn't matter. You might as well use the larger 43mm lenses if you're unsure.
40mm Version
The files that are not marked with a size are the 40mm versions. You need to order these frames/lenses from Zenni.com http://www.zennioptical.com/450021-metal-alloy-full-rim-frame-with-spring-hinge.html
They should be approximately 20-26$ US shipped. You can search around the internet to find coupon codes for free shipping or glare coating. I DEFINATELY recommend the glare coating.
43mm Version
These are exactly the same except the lenses are a tad larger. Use these frames: mhttp://www.zennioptical.com/550021-metal-alloy-full-rim-frame-with-spring-hinges.html
The object files below have 43 in the name.
Magnets
You need to get the magnets to glue into the frame and the lens pieces. The magnets needed are 1/8" diameter and 1/16" thick model D21B-N52 and you need 6 total. I bought mine here: https://www.kjmagnetics.com/proddetail.asp?prod=D21B-N52
They are about 6$ shipped.
Installation
To assemble the kit, you need to first glue in the six magnets, 3 into the frame and 3 into the lens holder such that they will attract each other.
You can see a video here: https://youtu.be/Xb6jRee2Mpo
To install the entire kit into the Vive you need to expand the face piece to allow for the most room. Insert the bottom of the kit into the bottom of the Vive and push down on the spring loaded arms until you can slide the top pieces under the top of the Vive. Then you can contract the face piece of the Vive back down to hold it in place.
Here is a video describing the process: https://youtu.be/nh7g7V6I4us
Just for the sake of disclaimers, install and use these at your own risk. I'm not trying to get rich off this, just recoup some time spent and help fund my new printer.
I spent a lot of time on development on this. WIP Pics: http://imgur.com/ADVQWwo
Donations for the printer fund gladly accepted:
If you want this printed for you, I have it on shapeways: https://www.shapeways.com/shops/pzdesigns
Parts
You need both a lens and a frame piece printed out. Lenses obtained from a pair of perscription Zenni.com glasses and 6 magnets.
Frame and Lens STL Files
There are now two different versions of the STL. There is a 40mm version and a 43mm version. All things being equal, I haven't really noticed a diffence between the 40mm or the 43mm version. If your IPD is on the high end, you may see some benefit from the 43mm version. The glasses from Zenni are the same price so it probably doesn't matter. You might as well use the larger 43mm lenses if you're unsure.
40mm Version
The files that are not marked with a size are the 40mm versions. You need to order these frames/lenses from Zenni.com http://www.zennioptical.com/450021-metal-alloy-full-rim-frame-with-spring-hinge.html
They should be approximately 20-26$ US shipped. You can search around the internet to find coupon codes for free shipping or glare coating. I DEFINATELY recommend the glare coating.
43mm Version
These are exactly the same except the lenses are a tad larger. Use these frames: mhttp://www.zennioptical.com/550021-metal-alloy-full-rim-frame-with-spring-hinges.html
The object files below have 43 in the name.
Magnets
You need to get the magnets to glue into the frame and the lens pieces. The magnets needed are 1/8" diameter and 1/16" thick model D21B-N52 and you need 6 total. I bought mine here: https://www.kjmagnetics.com/proddetail.asp?prod=D21B-N52
They are about 6$ shipped.
Installation
To assemble the kit, you need to first glue in the six magnets, 3 into the frame and 3 into the lens holder such that they will attract each other.
You can see a video here: https://youtu.be/Xb6jRee2Mpo
To install the entire kit into the Vive you need to expand the face piece to allow for the most room. Insert the bottom of the kit into the bottom of the Vive and push down on the spring loaded arms until you can slide the top pieces under the top of the Vive. Then you can contract the face piece of the Vive back down to hold it in place.
Here is a video describing the process: https://youtu.be/nh7g7V6I4us
Just for the sake of disclaimers, install and use these at your own risk. I'm not trying to get rich off this, just recoup some time spent and help fund my new printer.
I spent a lot of time on development on this. WIP Pics: http://imgur.com/ADVQWwo
Donations for the printer fund gladly accepted:
Similar models
thingiverse
free
Oculus Rift CV1 Prescription Lens Adapter with Removable Lenses by ftwelve
...n and out, so they should fit better without the need for sanding fresh off the printer. i prefer the 43mm size lens to the 40mm.
thingiverse
free
HTC Vive 43mm prescription eyeglass lens adapter by im_a_bus_yo
... stock face gasket it allows to use vive at closest distace without touching my face.
printed with pla without supports on cr-10.
thingiverse
free
(NO MAGNETS) Oculus Quest Prescription Lens Adapter
...rning: this sits very close to the quest lens with diopter -3.5 (cr 39) lenses. thicker lenses may touch (and scratch) the quest.
thingiverse
free
Valve Index Prescription Lens Adapter
...pop the lenses out and use them here. much nicer than trying to fit glasses inside your hmd - you can just enjoy the experience!
thingiverse
free
HTC VIVE Lens Guard by AtomicJoe
...ize )
another option is to print it with a flexible material, in wich case you will need to print it 1mm smaller overall or more.
thingiverse
free
Vive Pro 2 Zenni #550021 Lens Adapter by byancey
...le name.
i use the vpla_offset.stl version, and i recommend you start with the same, and then try the other variations if needed.
thingiverse
free
HTC Vive HMD Minimalist Wall Mount by rigelbot
...: twist-n-lock 75 lb. medium duty drywall anchors. it took me 5 minutes to install.
i hope you like it! see you in the metaverse!
thingiverse
free
ODST SMG Vive rifle by slink6
...ing power then the smaller magnets in the original design.
magnets used: http://www.kjmagnetics.com/proddetail.asp?prod=bx8c4-n52
thingiverse
free
HTC Vive Pro 2 lens protector by R3DPrintDE
... non-commercial. please feel free to print it on your own, but only for personal use. you can't sell 3d prints of these file.
thingiverse
free
Oculus Rift CV1 Prescription Lens Adapter - VR Cover Regular Facial Interface by waful
...did was space out the bottom placeholding tabs and modified their lengths where necessary. no changes to the actual frame itself.
Snowzach
thingiverse
free
Drumstick by snowzach
...drumstick by snowzach
thingiverse
it's a toy drumstick i made for my kids.
thingiverse
free
Spool Holder for 2020 Extrusion by snowzach
...spool holder for 2020 extrusion by snowzach
thingiverse
spool holder that mounts on 2020 extrusion.
thingiverse
free
Model Rocket by snowzach
...he tube piece is designed to take multiples and put together - print in vase mode with 2 layer shells. i had great luck with petg
thingiverse
free
Logitech C920 Wide Angle Adapter by snowzach
...th it for making it widescreen. it's also easy to take on/off the camera.
the lense is friction fit and is pretty darn tight.
thingiverse
free
Itty Bitty Double Flex Z-Probe Mounts by snowzach
...the ir sensor from filistruder. ir sensor
the proximity sensor needs supports to print. the ir sensor should work out of the box.
thingiverse
free
ECHBT Wifi 32 Case for Echelon EX-15 Bike by duhmayo
...print bottom with supports and 20% infill. echbt link: https://github.com/snowzachechbt wifi32 link:...
Vive
turbosquid
$40
HTC vive headset
...model htc vive headset for download as 3ds, max, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1174451)
turbosquid
$19
HTC Vive Lighthouse
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$19
Natuzzi Re-Vive
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$69
HTC Vive VR headset
... 3d model htc vive for download as ma, max, obj, fbx, and dae on turbosquid: 3d models for games, architecture, videos. (1242503)
turbosquid
$23
E3D -HTC Vive Tracker
...model e3d -htc vive tracker for download as max, obj, and c4d on turbosquid: 3d models for games, architecture, videos. (1190728)
turbosquid
$14
HTC Vive Joystick Rose
...htc vive joystick rose for download as max, 3ds, fbx, and obj on turbosquid: 3d models for games, architecture, videos. (1520802)
turbosquid
$14
HTC Vive Joystick Blue
...htc vive joystick blue for download as max, 3ds, fbx, and obj on turbosquid: 3d models for games, architecture, videos. (1520789)
turbosquid
$24
Loreal Elseve Shampoo Color Vive 400ml
...el loreal elseve shampoo color vive 400ml for download as max on turbosquid: 3d models for games, architecture, videos. (1400713)
3d_export
$15
VR HTC VIVE COSMOS GEAR REPAIR
... vive cosmos gear repair mechanical element for restoring the helmet mount stl format: rar archive print nylon or abs layer 0,1mm
3ddd
$1
плитка Vives - Special Pieces Titan
...литки.
ссылка на производителя:http://www.vivesceramica.com/en/products/floor-tiles/porcelain-clay/serie.html?sid=521
Htc
3ddd
$1
HTC one
...htc one
3ddd
htc , телефон
htc one
3ddd
$1
htc Hero
...ефон , смартфон , htc
смартфон htc hero, черный
3ddd
$1
htc Desire
...н , смартфон , htc
смартфон htc desire, красный
3ddd
$1
HTC Magic
...htc magic
3ddd
телефон , htc
моделька коммуникатора htc magic. в архиве obj и max файлы
3d_ocean
$5
HTC Magician
...htc magician
3docean
cell phone htc htc magician mobile phone
i use fryrender and mentalray for rendering the previews.
3ddd
$1
HTC Смартфоны
...ы
3ddd
htc , телефон
модэли смартфонов htc с текстурами в комплекте на все случаи жизни)
turbosquid
free
htc
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3ddd
$1
HTC Desire Eye
...htc desire eye
3ddd
htc , телефон
htc desire eye
3ddd
$1
HTC Touch HD
...http://www.gsmarena.com/htc_touch_hd-2525.php фото:http://i.smartphone.ua/img/phones/htc-touch-hd/foto_001.jpg
turbosquid
$30
HTC Explorer black Also known as HTC Pico
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.