Thingiverse
Voxelab Proxima Vat by Bob68
by Thingiverse
Last crawled date: 2 years, 10 months ago
This is a Vat for the Voxelab Proxima Printer using 4mm square weld nuts.
I use square weld nuts because they are less likely to spin when tightening the bolt. The four "feet" will also bite into the Vat bottom.
When assembling the Vat i would suggest that a bit of contact adhesive on each nut to hold it in place before trying to stick the two Vat halves together.
The first time that i tried this one nut popped out, then a second. The epoxy was setting before i was ready. If you do a dry run then you will be able to see what i mean.
Use a slower setting epoxy resin as this will take a little time to get things in place. This uses 26 x M4 countersunk bolts 16mm long and 26 Square weld nuts.
Infill was 25% for the Vat top and 100% for the rest.
After assembly. I would suggest put the Vat on some tissue paper. Then fill it with water to test for leaks.
I use square weld nuts because they are less likely to spin when tightening the bolt. The four "feet" will also bite into the Vat bottom.
When assembling the Vat i would suggest that a bit of contact adhesive on each nut to hold it in place before trying to stick the two Vat halves together.
The first time that i tried this one nut popped out, then a second. The epoxy was setting before i was ready. If you do a dry run then you will be able to see what i mean.
Use a slower setting epoxy resin as this will take a little time to get things in place. This uses 26 x M4 countersunk bolts 16mm long and 26 Square weld nuts.
Infill was 25% for the Vat top and 100% for the rest.
After assembly. I would suggest put the Vat on some tissue paper. Then fill it with water to test for leaks.
Similar models
thingiverse
free
Voxelab Proxima Elegoo Vat adapter by AuverPrint
...ce the vat by a universal model like that of the elegoo
for this project you will need:
2x m5 nut
2x screw m5x16 or m5x20
enjoy !
thingiverse
free
VOXELAB PROXIMA VAT LID by elayas84
...voxelab proxima vat lid by elayas84
thingiverse
fixed proxima vat lid
with the right size
thingiverse
free
Elegoo Mercury adapter to Voxelab Proxima table by avolkov1987
...ter to voxelab proxima table by avolkov1987
thingiverse
allows place voxelab proxima table on elegoo mercury wash and cure rack.
thingiverse
free
Any Cubic Mono X Vat Nut replacement by WayneTarin
...rinting in petg/ abs.
i filled the hole in the top with 3d resin and cured it, you fill it in with 5 min epoxy or use a glue gun.
thingiverse
free
Voxelab Proxima Drain Bracket by 3D_Print_PT
... by 3d_print_pt
thingiverse
drain bracket for the voxelab proxima 6" resin 3d printer
v2 added some clearance for the knob.
thingiverse
free
Voxelab Proxima 6.0 Cover Mount by tagy22
...d to remove it when printing as when a print finishes the z axis moves up to the top.
can be printed on its side without support.
grabcad
free
Voxelab Proxima 6 FEP pattern
...voxelab proxima 6 fep pattern
grabcad
voxelab proxima 6 fep pattern
thingiverse
free
EPAX E10 VAT Knob by ething
...epax e10 vat knob by ething
thingiverse
vat knob. you will require a m4 nut to hold the bolt in place.
grabcad
free
Magnetic Drill Tube Notcher
... table and and welded together. uses 1/2" bolt and nut welded in place to secure tube and 1/4" bolts to set the angle.
grabcad
free
bolt-pipe
... smoking. when finished, reassemble the nut and bolt for easy hidden secret storage. just be sure not to lose it in your toolbox.
Bob68
thingiverse
free
Solar Cell Bracket by Bob68
...l bracket by bob68
thingiverse
this is for the 3w and 1.5w solar cells (145mm x 145mm and 115mm x 85mm).
fixing bolts m4 x 50mm.
thingiverse
free
Flag Coasters by Bob68
...on my printer so the rest were printed at 125%. the different colours were extruded to different heights to make printing easier.
thingiverse
free
Large Wheels by Bob68
...of the tyre is 121mm x 60mm. the other tyre that is included is 135mm x 35mm which is the only version that has been made so far.
thingiverse
free
Screwdriver Bit Holders by Bob68
... bits handy. most of the time using a screwdriver handle is not necessary for adjustments.
22-06-18. added the four larger sizes.
thingiverse
free
Rocker Switch Holder by Bob68
...ed/brown parts in the diagram are printing support to be cut away.
printed upside down then will not need any additional support.
thingiverse
free
Component Drawers with Label Slot by Bob68
...sting drawers uploaded here:-http://www.thingiverse.com/thing:1443211
also for use with:-http://www.thingiverse.com/thing:1442036
thingiverse
free
Bed Levelling Wedge by Bob68
...ght is adjustable by printing items with a raft. nuts and bolts used were 3mm and 50mm in length, although 40mm length should do.
thingiverse
free
30mm/40mm Fan Guard/Grilles by Bob68
...hingiverse
fan grilles for 30 and 40mm fans. the 30mm grille is 1mm thick with a 1.5mm base and the 40mm is 1.5mm thick overall.
thingiverse
free
Component Drawers by Bob68
...ds internally on the slots, which was easy to clean up.
the other parts shown are here:- http://www.thingiverse.com/thing:1442036
thingiverse
free
Socket Finger Guard by Bob68
...t around the bolts on the perspex sheet. changed slightly from the actual item shown because i forgot to make space for the nuts.
Proxima
3ddd
free
Proxima
... proxima
http://flashdq.com/upload_ru/collections/1351075052_fdq_proxima_catalogue_card_eng.pdf
turbosquid
$25
Proxima
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_export
$5
proxima midnight - avengers infinity war
...inity war
3dexport
excellent for small size 3d printing.<br>simple sketchup modeling.<br>ideal model for papercraft.
3d_sky
free
Proxima
...ma
3dsky
flash&dq sphere
http://flashdq.com/upload_ru/collections/1351075052_fdq_proxima_catalogue_card_eng.pdf
thingiverse
free
VOXELAB PROXIMA VAT LID by elayas84
...voxelab proxima vat lid by elayas84
thingiverse
fixed proxima vat lid
with the right size
thingiverse
free
Voxelab Proxima Drain Bracket by 3D_Print_PT
... by 3d_print_pt
thingiverse
drain bracket for the voxelab proxima 6" resin 3d printer
v2 added some clearance for the knob.
thingiverse
free
Elegoo Mercury adapter to Voxelab Proxima table by avolkov1987
...ter to voxelab proxima table by avolkov1987
thingiverse
allows place voxelab proxima table on elegoo mercury wash and cure rack.
thingiverse
free
Exodus Proxima Centauri WMD Missiles by ThatChristianGuy
...hristianguy
thingiverse
made 3d models of the wmd in exodus proxima centauri
you can print how ever many you think is necessary.
thingiverse
free
Voxelab Proxima Elegoo Vat adapter by AuverPrint
...ce the vat by a universal model like that of the elegoo
for this project you will need:
2x m5 nut
2x screw m5x16 or m5x20
enjoy !
thingiverse
free
Voxelab Proxima Bed Drain Mount by FedorSosnin
...ne.
enjoy and share your makes. :)
if you found my things useful, treat me to a cup of coffee by using the paypal button below :)
Voxelab
thingiverse
free
Voxelab Aquila 70mm by 0madem
...voxelab aquila 70mm by 0madem
thingiverse
mainboard cover for voxelab aquila 70x70x15 fan.
thingiverse
free
VoxeLab Aquila LCD Cap by elwoodb
...voxelab aquila lcd cap by elwoodb
thingiverse
voxelab aquila lcd cap
95,80х54,70х3
thingiverse
free
Voxelab Aquila Screen Frame by Junr05
...ogo was sidewas since mounting the screen vertical and it was giving me a little ocd lol so i made this screen frame to cover it.
thingiverse
free
Voxelab Aquila Filiment Guide by venomnet
...ment guide by venomnet
thingiverse
this filiment guide is designed to work with antibimmer voxelab aquila cable chain full set.
thingiverse
free
Voxelab SLA DrainBracet by shinano
...d printers.
platform temporary holding adapter for voxelab photofabrication printers.m8 x 50 hexagonal bolt and nut are required.
thingiverse
free
Voxelab Proxima Drain Bracket by 3D_Print_PT
... by 3d_print_pt
thingiverse
drain bracket for the voxelab proxima 6" resin 3d printer
v2 added some clearance for the knob.
thingiverse
free
Voxelab Aquila Riser Feet by daaar
...ngiverse
rear left riser for voxelab aquila. regular riser does not fit due to wire attachment
feet_riser_35_lightweight_b remix
thingiverse
free
Voxelab Aquila filament holder by thisnoise
...giverse
simple filament holder for the voxelab aquila, same as seen on the ender 3 prints but designed to be it's own thing.
thingiverse
free
Voxelab Aquila Display Vertical Mount by m_sfln
...lay vertical mount by m_sfln
thingiverse
display vertical mount for voxelab aquila.
v1 - in my photos.
v2 - fixes after testing.
thingiverse
free
Direct extruder BMG for Voxelab Aquila by Great_Photos
...on, the retract is 1mm. print time has decreased by at least 35%.
suitable for voxelab aquila only, not suitable for ender 3 !!!
Vat
turbosquid
$49
vat
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$5
vat
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$19
Wooden Vat Closed
...y free 3d model wooden vat closed for download as max and obj on turbosquid: 3d models for games, architecture, videos. (1197266)
turbosquid
$19
Wooden Vat 03
...yalty free 3d model wooden vat 03 for download as max and obj on turbosquid: 3d models for games, architecture, videos. (1197209)
turbosquid
$19
Wooden Vat 02
...yalty free 3d model wooden vat 02 for download as max and obj on turbosquid: 3d models for games, architecture, videos. (1197207)
turbosquid
$280
VAT RASER 02.jpg
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$265
VAT SP 07.jpg
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$180
VAT LUX 02.jpg
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$2
Large Cartoony Oil Vat
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$3
Sci-fi cloning vats
...cloning vats for download as 3ds, obj, wrl, x, fbx, and blend on turbosquid: 3d models for games, architecture, videos. (1290168)