Thingiverse
Voron Afterburner toolhead bowden guillotine by falcon14141
by Thingiverse
Last crawled date: 3 years, 1 month ago
The Voron toolheads may have a small bowden piece on to to link to the extruder or bowden mount
On the afterburner CAD, it measures 6,82mm.
I designed a bodden cutter wich shall provide a straight 90° cut of the boden, and may be used on one side to adjust the voron toolhead requirements. Just apply the tool on top of the toolhead, like being mounted to an actual extruder, and cut to the right lentgh.
Parts needed:
1x segment of cutter blade Olfa LBB10
2x M3x16 screws
6x 6x3 Neodyne magnets, like the one used on the hall effect sensors.
Magnets shall be mounted in oposite directions in top and bottom parts, to have a spring like effect.
As applying the magnets may be difficult, I also made a small tool to help. Just apply a firm push to get the magnet centered, and than use an M3x30 or M3x40 screw to push it down to depth with the tool
Enjoy
On the afterburner CAD, it measures 6,82mm.
I designed a bodden cutter wich shall provide a straight 90° cut of the boden, and may be used on one side to adjust the voron toolhead requirements. Just apply the tool on top of the toolhead, like being mounted to an actual extruder, and cut to the right lentgh.
Parts needed:
1x segment of cutter blade Olfa LBB10
2x M3x16 screws
6x 6x3 Neodyne magnets, like the one used on the hall effect sensors.
Magnets shall be mounted in oposite directions in top and bottom parts, to have a spring like effect.
As applying the magnets may be difficult, I also made a small tool to help. Just apply a firm push to get the magnet centered, and than use an M3x30 or M3x40 screw to push it down to depth with the tool
Enjoy
Similar models
thingiverse
free
BigTreeTech ZSYong Mix Voron Afterburner Toolhead by falcon14141
...oron clockwork remotely mounted as bowden. printing works like a charm on my dual clockwork bowden 80cm setup.
enjoy your prints!
thingiverse
free
E3D Cyclops/Chimera Voron Afterburner toolhead by falcon14141
...l layout, with more space in between the heatbreaks. i may make a cyclops+ / chimera+ version later if need be.
enjoy your prints
thingiverse
free
Voron extruder to bowden 2020 mount (Clockwork or Galileo) by falcon14141
... use it as a bodwen drive
bom:
voron units and their afterburner mounting screws
2x 40mm screws
bsp 1/8 adapter
enjoy your prints
thingiverse
free
MK8 Toolhead for Voron Afterburner (Stock Ender 5+) by falcon14141
...unt for the stock mk8 provided with the printer.
it is remixed from the original mosquito mount made by voron.
enjoy your prints.
thingiverse
free
Voron Afterburner low profile dual bowden Y-Splitter with quickdisconnect by falcon14141
...
bom:
2x m3x16 screws
1x m3x8 screw
5 m3 inserts
2x easun ecas04 bowden collets
3x 6x3mm magnets
1x 4 pin jst pcb header
have fun
thingiverse
free
Anet A8 Universal Toolhead Mount / QuickSwap by TazerReloaded
...l upload one more.
the stock anet a8 extruder needs a little modification to fit, cut out 3x3mm grooves as shown in the picture.
thingiverse
free
Voron Afterburner see-trough low profile side dual bowden Y-Splitter by falcon14141
...om:
2x m3x10 screws
2x m3x25 screws
6 m3 inserts
2x easun ecas04 bowden collets
3x 6x3mm magnets
1x 4 pin jst pcb header
have fun
thingiverse
free
Voron 2.4 jig for magnet hole drilling on Z assembly by falcon14141
...top underside. it worked for me without cutting them, they provided a spring effect to hold the part in place.
enjoy your prints!
thingiverse
free
2020 Bowden Push Fitting Mount by piglet_74
...bowden push fitting. the hole for the fitting is a little over 5mm so i used 4 shells and just threaded it right in with pliers.
thingiverse
free
Voron 2.4, Orbiter1.5 Mount by madsgadeberg
...extruder mount for the voron afterburner.
print settings same as other voron parts.
bolts: 4pcs m3x20 and regular m3 heat inserts
Falcon14141
thingiverse
free
Voron M4 Guidler with ID by falcon14141
...voron m4 guidler with id by falcon14141
thingiverse
simple remix of the voron m4 guidler to add identification of your extruder.
thingiverse
free
Voron Afterburner fan assembly with quickdisconnect by falcon14141
...female, 1 male header
8x 6x3 neodyne magnets (including +2 required for the hotend fan)
cable, solder, heatshrink, and patience!
thingiverse
free
MK8 Toolhead for Voron Afterburner (Stock Ender 5+) by falcon14141
...unt for the stock mk8 provided with the printer.
it is remixed from the original mosquito mount made by voron.
enjoy your prints.
thingiverse
free
Voron extruder to bowden 2020 mount (Clockwork or Galileo) by falcon14141
... use it as a bodwen drive
bom:
voron units and their afterburner mounting screws
2x 40mm screws
bsp 1/8 adapter
enjoy your prints
thingiverse
free
Ender 5+ 2020 mount for bowden and cable guide by falcon14141
... part can also be used to hold the stock ender5+ cable guide, if having the cables climbing z by the right side and not the back.
thingiverse
free
BigTreeTech ZSYong Mix Voron Afterburner Toolhead by falcon14141
...oron clockwork remotely mounted as bowden. printing works like a charm on my dual clockwork bowden 80cm setup.
enjoy your prints!
thingiverse
free
Voron 2.4 jig for magnet hole drilling on Z assembly by falcon14141
...top underside. it worked for me without cutting them, they provided a spring effect to hold the part in place.
enjoy your prints!
thingiverse
free
E3D Cyclops/Chimera Voron Afterburner toolhead by falcon14141
...l layout, with more space in between the heatbreaks. i may make a cyclops+ / chimera+ version later if need be.
enjoy your prints
thingiverse
free
Voron Afterburner low profile dual bowden Y-Splitter with quickdisconnect by falcon14141
...
bom:
2x m3x16 screws
1x m3x8 screw
5 m3 inserts
2x easun ecas04 bowden collets
3x 6x3mm magnets
1x 4 pin jst pcb header
have fun
Toolhead
thingiverse
free
FLUX TOOLHEAD by yaoalen
...flux toolhead by yaoalen
thingiverse
you can put toolhead hear
thingiverse
free
RL550B toolhead by xxbombamanxx
...rl550b toolhead by xxbombamanxx
thingiverse
toolhead for dillon rl 550 b.
thingiverse
free
Olmec Toolhead by 3DPrinthings
...erse
olmec toolhead holds small tools like screwdrivers and hex keys ...
printed with matteforge filament (www.3dprinthings.eu).
thingiverse
free
Dillon 550 Toolhead Stand by RPR308
...dillon 550 toolhead stand by rpr308
thingiverse
toolhead stand for dillon 550
thingiverse
free
FLUX Toolheads BOX by wyp8711
...8711
thingiverse
flux delta+ toolheads box
※uploaded files are optimized
flux tools box:http://www.thingiverse.com/thing:2282697
thingiverse
free
Simple and Double Dillon XL 650 Toolhead stand
...ble stand for dillon xl 650 toolhead.
simple toolhead stand is 100mm x 120mm x 30mm
double toolhead stand is 200mm x 120mm x 30mm
thingiverse
free
Snapmaker 2 Toolhead Holder by gatonero
...r snapmaker 2. i designed it in freecad. it works with snapmaker 2.0 quick tool changer https://www.thingiverse.com/thing:4700986
thingiverse
free
Lulzbot TAZ 5 Sharpie/Pen Toolhead by wrvn97
...lulzbot taz 5 sharpie/pen toolhead by wrvn97
thingiverse
toolhead for holding writing utensils on a taz 5.
thingiverse
free
Creality E3D V6 Toolhead
...ns are compatable with bltouch.
to be honest i made this a while ago so i'm not entirely sure whats required on installation.
thingiverse
free
Snapmaker 2.0 ToolHead holder by JH1616
...ng downwards. wich leads to laser lense are not getting dirty / dusty. and you can leave the filament in when changing toolheads.
Afterburner
3d_export
$60
myasishchev m-50
...e two inner engines were located under the wing and the two outer on the wingtips of its shoulder-mounted, truncated delta wings.
3d_export
$38
Jet Plane Explosion 3D Model
...losion fireball afterburn aircraft fire special effect environment fx
jet plane explosion 3d model rahman.najafian 87888 3dexport
3d_export
free
Tu-222 bechovka concept stealth bomber
...version with wheels and 2 flying versions with trails, afterburner pilot and armament. model has bump map, roughness map...
3d_export
$5
Mig-29 fulcrum jet fighter lowpoly
...version with wheels and 2 flying versions with trails, afterburner pilot and armament. model has bump map, roughness map...
3d_export
$5
I-20 Firehawk lowpoly concept jet fighter
...version with wheels and 2 flying versions with trails, afterburner pilot and armament. model has bump map, roughness map...
3d_export
$5
I-19 ravenclaw stealth fighter jet
...version with wheels and 2 flying versions with trails, afterburner pilot and armament. model has bump map, roughness map...
3d_export
$6
MIG-41 PAK DP
...version with wheels and 2 flying versions with trails, afterburner pilot and armament.<br>model has bump map, roughness map and...
3d_export
$5
Skunk F-33 Lancer lowpoly concept jet fighter
...version with wheels and 2 flying versions with trails, afterburner pilot and armament. model has bump map, roughness map...
3d_export
$5
General Dynamics F-111 Aardvark jet fighter
...version with wheels and 2 flying versions with trails, afterburner pilot and armament. model has bump map, roughness map...
3d_export
$5
General Dynamics F-34 Lynx concept fighter
...version with wheels and 2 flying versions with trails, afterburner pilot and armament.<br>model has bump map, roughness map and...
Guillotine
turbosquid
$29
Guillotine
...turbosquid
royalty free 3d model guillotine for download as on turbosquid: 3d models for games, architecture, videos. (1560590)
turbosquid
$25
Guillotine
...d
free 3d model guillotine for download as obj, stl, and fbx on turbosquid: 3d models for games, architecture, videos. (1522021)
turbosquid
$12
Guillotine
...
royalty free 3d model guillotine for download as 3ds and fbx on turbosquid: 3d models for games, architecture, videos. (1252389)
3d_export
$10
The guillotine and the block
...the guillotine and the block
3dexport
the guillotine and the block autocad 2013
3d_export
free
the guillotine
...the guillotine
3dexport
3d_export
$5
guillotine
...ch guillotine. it look used (have dry blood on it, but i can change it if needed). every file have a zip folder in with textures.
3d_export
$20
guillotine
...guillotine
3dexport
a historic execution device
turbosquid
$55
Guillotine
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$50
Guillotine
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$30
Guillotine
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
Voron
thingiverse
free
VORON Tag by froggy2288
...voron tag by froggy2288
thingiverse
tag for a voron 3d printer. mounts directly to 20mm aluminum extrusion.
thingiverse
free
3D Voronization of Hand by kriffe
...3d voronization of hand by kriffe
thingiverse
3d voronization of hand.
thingiverse
free
Tool Holder Voron by Struppiboy
...ngiverse
ein praktischer zangenhalter für den voron 2.4 am gehäuse.
a practical pliers holder for the voron 2.4 on the housing.
thingiverse
free
Stand Voron 2.4 by Struppiboy
...uppiboy
thingiverse
ich habe für den voron 2.4 füße für squash bälle konstruiert.
i constructed 2.4 squash balls for the voron.
thingiverse
free
Voron Gopro Mount by JacobMakes
...filming timelape videos of my voron, i changed up the design to better match the style of the voron, also made it easier to print
thingiverse
free
Voron Switchwire - Build Log by DarekNorway
...uild bog is regularly updated on hackaday:
https://hackaday.io/project/174810-voron-switchwire-3d-printer
voron switchwire frame
thingiverse
free
Voron 2.4, Orbiter1.5 Mount by madsgadeberg
...extruder mount for the voron afterburner.
print settings same as other voron parts.
bolts: 4pcs m3x20 and regular m3 heat inserts
thingiverse
free
Voron 2.4 feet by maciek13
...voron 2.4 feet by maciek13
thingiverse
.
thingiverse
free
VORON case for Viki2 LCD by fulg
...on case for viki2 lcd by fulg
thingiverse
here is a case for the viki2 lcd. it is styled to match the rest of the voron printer.
thingiverse
free
Voron M4 Guidler with ID by falcon14141
...voron m4 guidler with id by falcon14141
thingiverse
simple remix of the voron m4 guidler to add identification of your extruder.
Bowden
turbosquid
$199
Vintage Ben Bowden Spacelander bike
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3ddd
$1
Manooi Artica
...and pendants in various sizes and forms. suspension: galvanized bowden - dia. 1,5 mm. bulb: max 60 w -...
thingiverse
free
Remix Compact Bowden extruder - m6 bowden couplers and bowden tube pass-through
...ouplers and bowden tube pass-through
thingiverse
remix compact bowden extruder - m6 bowden couplers and bowden tube pass-through
thingiverse
free
Bowden Extruder
...bowden extruder
thingiverse
i have created bowden extruder for flsun delta 3d printer.
thingiverse
free
bowden 3mm by spee_D
...bowden 3mm by spee_d
thingiverse
for bowden 3mm
thingiverse
free
Bowden Tube Cutter
...bowden tube cutter
thingiverse
bowden tube cutter
thingiverse
free
Customizable Bowden Clip
...customizable bowden clip
thingiverse
customizable bowden clip
thingiverse
free
Bowden Oiler by fcheshire
...bowden oiler by fcheshire
thingiverse
inline bowden oiler
thingiverse
free
Bowden adapter by helkaroui
...bowden adapter by helkaroui
thingiverse
this is a fixed bowden adapter
thingiverse
free
Adventure3 Bowden Clip
...adventure3 bowden clip
thingiverse
adventure3 bowden clip