Thingiverse
Voron 2.4 350 spool holder by yanew
by Thingiverse
Last crawled date: 2 years, 11 months ago
Internal spool holder for Voron 2.4 350 build.
This keeps the filaments warm and dry while printing.
Especially filaments such as Nylon, PETG, TPU, etc. are very susceptible to moisture.
Of course, the spool reduces the height of printing, but I personally very rarely have to print more than 18-20 cm in height.
For some filaments it may be necessary to reduce the flow rate by 2-3% because the path of the filament is shorter and with less resistance.
One of the parts is original from Voron Switchwire spool holder.
One M3x12 bolt with hammer nut and PTFE 4 / 3mm pipe for the guide is needed.
This keeps the filaments warm and dry while printing.
Especially filaments such as Nylon, PETG, TPU, etc. are very susceptible to moisture.
Of course, the spool reduces the height of printing, but I personally very rarely have to print more than 18-20 cm in height.
For some filaments it may be necessary to reduce the flow rate by 2-3% because the path of the filament is shorter and with less resistance.
One of the parts is original from Voron Switchwire spool holder.
One M3x12 bolt with hammer nut and PTFE 4 / 3mm pipe for the guide is needed.
Similar models
thingiverse
free
Voron 2.4 10mm spool holder by stoehrchen
...ing block
2pcs 119mm bowden tube (1,75mm inside / 4mm outside)
printing:
only infill in the bowden tube section not in the holes.
thingiverse
free
Ender 3 Slim Filament Holder by juanferjaramillo
...variety or spools.
the holder has some ribs to reduce friction with the spool.
print it without support, laying on the flat side.
thingiverse
free
Filament on spool holder by Oparie
... 1 kg of filament and have 2.5mm sides with a small rim.
i printed these red ones of petg. nice colour to spot and very flexible.
thingiverse
free
Tool Holder Voron by Struppiboy
...ngiverse
ein praktischer zangenhalter für den voron 2.4 am gehäuse.
a practical pliers holder for the voron 2.4 on the housing.
thingiverse
free
Spool holder remix for Prusa Multi-Material by judetomate
...ilament. it works very well !
i tried to reduce as much as possible existing spool holeder parts.
edit : v2 with spool axis stop.
thingiverse
free
Filament Spool Holder - reduced by anat
...the design just a little bit to enable the spool to turn more easily and to make it easier for putting on and removing the spool.
thingiverse
free
Ender 3 Filament Spool Holder by drewdz
...ender 3 filament spool holder by drewdz
thingiverse
self centering filament spool holder to reduce resistance on your filament.
thingiverse
free
Ender 3 spool holder
...t the spool rests on. have not had any issues using this filament holder. would recommend to print this at 25% or greater infill.
thingiverse
free
Spool saver Spool holder by 3Gdesigns
...or storage. keep your filament fresh, and reduce exposure to humidity, even while printing!
i have printed it and it works great!
thingiverse
free
Filament Spool 200mm by BenJackson
...200mm by benjackson thingiverse a 200mm filament spool very similar to the plastic ones used by suppliers like protoparadigm....
Yanew
thingiverse
free
Box Electronic by yanew
...egs (depends on the thickness of the bottom and the box)
car jump starter with this box:https://www.thingiverse.com/thing:4614953
thingiverse
free
Tool box II Parametric by yanew
...no support needs.
hinges screw is m3.
cad file is fusion 360.
last two sketches are for customization inside and text on the lid.
thingiverse
free
Prusa I3 Parametric spool holder by yanew
...usа spool holder but with two arms for less vibration. the fusion360 3d model is parametric and can be set for one or two spools.
thingiverse
free
Disc sander by yanew
... 360.
the drill support needs to be changed for other drill models.
the bed has been slightly changed from the one in the photos.
thingiverse
free
Fast charging power bank by yanew
... need :
m3x10 4pc.
m3x8 2pc.
the button support must be cut as shown in the photos.
the box and lid are printed without supports.
thingiverse
free
Filament box by yanew
...glued with glue to already printed boxes.
i also added a second holder modified with a smooth 8mm metal rod.
the length is 86 mm.
thingiverse
free
Tool box Parametric by yanew
...t like fluke. the brand is filamentum, the color is melon yellow.
the link for the logo:https://www.thingiverse.com/thing:3903992
thingiverse
free
Car starter with USB by yanew
...-4ca4-901e-7c286ce789c9-10&btsid=0bb0624216018388590743668ebb2e&ws_ab_test=searchweb0_0,searchweb201602_,searchweb201603_
thingiverse
free
Led base for christmas tree idig3d by yanew
...onsumption is 10 -15 ma, so with a power bank 10000 mah will work for 1 month
model in fusion360 is parametric and can be resize.
Voron
thingiverse
free
VORON Tag by froggy2288
...voron tag by froggy2288
thingiverse
tag for a voron 3d printer. mounts directly to 20mm aluminum extrusion.
thingiverse
free
3D Voronization of Hand by kriffe
...3d voronization of hand by kriffe
thingiverse
3d voronization of hand.
thingiverse
free
Tool Holder Voron by Struppiboy
...ngiverse
ein praktischer zangenhalter für den voron 2.4 am gehäuse.
a practical pliers holder for the voron 2.4 on the housing.
thingiverse
free
Stand Voron 2.4 by Struppiboy
...uppiboy
thingiverse
ich habe für den voron 2.4 füße für squash bälle konstruiert.
i constructed 2.4 squash balls for the voron.
thingiverse
free
Voron Gopro Mount by JacobMakes
...filming timelape videos of my voron, i changed up the design to better match the style of the voron, also made it easier to print
thingiverse
free
Voron Switchwire - Build Log by DarekNorway
...uild bog is regularly updated on hackaday:
https://hackaday.io/project/174810-voron-switchwire-3d-printer
voron switchwire frame
thingiverse
free
Voron 2.4, Orbiter1.5 Mount by madsgadeberg
...extruder mount for the voron afterburner.
print settings same as other voron parts.
bolts: 4pcs m3x20 and regular m3 heat inserts
thingiverse
free
Voron 2.4 feet by maciek13
...voron 2.4 feet by maciek13
thingiverse
.
thingiverse
free
VORON case for Viki2 LCD by fulg
...on case for viki2 lcd by fulg
thingiverse
here is a case for the viki2 lcd. it is styled to match the rest of the voron printer.
thingiverse
free
Voron M4 Guidler with ID by falcon14141
...voron m4 guidler with id by falcon14141
thingiverse
simple remix of the voron m4 guidler to add identification of your extruder.
350
thingiverse
free
hacked 350
...hacked 350
thingiverse
hacked 350
thingiverse
free
Enclosed of Terminal for Mean Well LRS-350-12 LRS-350-24 by Budiman7x
...n well lrs-350-12 lrs-350-24 by budiman7x
thingiverse
enclosed of terminal for mean well lrs-350-12 lrs-350-24
for safety reason
thingiverse
free
SX-350 Boxes by fluxcore
...sx-350 boxes by fluxcore
thingiverse
2 diffrent mod boxes and a cradle for sx-350 chips
thingiverse
free
hacked 350 engine
...hacked 350 engine
thingiverse
engine hacked half
thingiverse
free
Meanweel 350 series holder by yann44
...ries holder by yann44
thingiverse
patte de fixation pour alimentation meanwell série 350
meanwell power supply 350 series holder
thingiverse
free
Meanwell NES-350 Power Supply
...meanwell nes-350 power supply
thingiverse
meanwell-nes-350-12-dimensions
thingiverse
free
Yaesu FTM-350 Universal Holder by EB5TC
...yaesu ftm-350 universal holder by eb5tc
thingiverse
soporte universal para ftm-350.
ftm-350 universal holder.
thingiverse
free
Eheim Skim 350 Skimmer by matys1701
...eheim skim 350 skimmer by matys1701
thingiverse
eheim skim 350 skimmer with custom grid
thingiverse
free
PRC-350 Battery Cassette Lid.
...prc-350 battery cassette lid.
thingiverse
bottom plate for the prc-350 battery cassette.
thingiverse
free
Vaillant colormatic 350 button by jieterpan1
...ant colormatic 350 button by jieterpan1
thingiverse
this is a replacement for the turning button of the vaillant colormatic 350.
Spool
thingiverse
free
Spool Support For Anycubic Spool Holder and AMZ3D Spools by Kobaratsu
... amz3d spools by kobaratsu
thingiverse
spool axis support to avoid jerks on spool, using anycubic spool holder and amz3d spools
thingiverse
free
Spool adapter for Warhorse spool
...spool adapter for warhorse spool
thingiverse
a simple spool adapter to use abs warhorse spool with a 72 mm hole diameter.
thingiverse
free
Spool holder for 1KG Spools by angkor
...spool holder for 1kg spools by angkor
thingiverse
spool holder for 1kg spools
thingiverse
free
Spool holder
...spool holder
thingiverse
i use this spool holder for up to 1kg spools and should fit all spools.
thingiverse
free
Spool assembler
... empty spool with this spool assembler
just cut an empty spool in half , put your filament and assemble with this spool assembler
thingiverse
free
Small Spool and Spool Stand by Beckman13
...ool holder are meant for 50 gram flexible filaments. the two sides of the spool holder are meant to slide together and interlock.
thingiverse
free
spool spindle cap for 25mm spools by Seadevil
...spool spindle cap for 25mm spools by seadevil
thingiverse
spool spindle cap for 25mm spools
thingiverse
free
spool ! by St0rmingBr4in
...spool ! by st0rmingbr4in
thingiverse
this is a spool !
thingiverse
free
Spool Holder for large spools by dmonkey
...y
thingiverse
a spool holder that you can attach to the back of a makerbot replicator that can hold large filament spools (1kg)
thingiverse
free
Spool roll
...spool roll
thingiverse
spool roll
4
thingiverse
free
arceau 4*4 jetman by jps57550
...arceau 4*4 jetman by jps57550
thingiverse
arceau de rechange pour le 4*4 jetman
thingiverse
free
4 x 4 Bench by pangeaexpress
...4 x 4 bench by pangeaexpress
thingiverse
3d model of our 4 x 4 bench. designed by eric arneson & nahal sohbati
thingiverse
free
4 by PencilPomelo
...4 by pencilpomelo
thingiverse
4
thingiverse
free
4 by Yangchigi
...4 by yangchigi
thingiverse
4
thingiverse
free
base for connect 4 puissance 4 by doubidou
...base for connect 4 puissance 4 by doubidou
thingiverse
connect 4 base puissance 4
thingiverse
free
#4 by ak47vogt
...#4 by ak47vogt
thingiverse
4 part
thingiverse
free
4 sharkz
...4 sharkz
thingiverse
4 sharkz
thingiverse
free
4 By 4 Lattice Cube by Trevin_9922Z
...n_9922z
thingiverse
a larger 4 by 4 version of my old lattice cube that will test your printer even more. once again, good luck!
thingiverse
free
4 Gewinnt / Connect Four / 4 in a row
...4 gewinnt / connect four / 4 in a row
thingiverse
4 gewinnt
thingiverse
free
4" to 4" Hose Adapter
... inch hoses together. i used the adapter to connect two aluminum dryer hoses to exhaust the fumes from my chinese laser engraver.
2
thingiverse
free
KV-2-2-2 by redstone125
...kv-2-2-2 by redstone125
thingiverse
nuclear death refrigerator x3.
thingiverse
free
Braccialetto 2 - Bracelets 2 by doctormao
...braccialetto 2 - bracelets 2 by doctormao
thingiverse
braccialetto 2 - bracelets 2
thingiverse
free
Schleuder 2 / Slingshot 2 by Ju5tMak3
...schleuder 2 / slingshot 2 by ju5tmak3
thingiverse
schleuder 2 / slingshot 2
have fun
thingiverse
free
2-Hexagon-2 by letongtr
...2-hexagon-2 by letongtr
thingiverse
ultrascope project
thingiverse
free
X'2 2 by kwcartroom
...x'2 2 by kwcartroom
thingiverse
try number 2
thingiverse
free
2 Color Box (#2) by David_Mussaffi
...2 color box (#2) by david_mussaffi
thingiverse
2 color box (#2)https://www.youtube.com/watch?v=g5jgss-fn_8
thingiverse
free
Toy Gun 2-2
...toy gun 2-2
thingiverse
this morning's design.
thingiverse
free
(a+b)^2 = a^2 +2ab+b^2, algebraic formula by lgbu
... ways to explain (a+b)^2 = a^2 +2ab+b^2.
the board alone is enough; the component pieces just add another layer of manipulation.
thingiverse
free
2 by orhandrkn
...2 by orhandrkn
thingiverse
2
thingiverse
free
2 by Nicolewake
...2 by nicolewake
thingiverse
2
Holder
thingiverse
free
Stubby holder holder
...der
thingiverse
bottom on the holder is sized for a can or bottle. top of the holder is sized for one in a cooler/stubby holder.
thingiverse
free
Soap holder holder
...soap holder holder
thingiverse
it's a holder to hold the famous soap holder.
thingiverse
free
bottle holder Jar holder can holder
...bottle holder jar holder can holder
thingiverse
hole diameter 38.6mm
thingiverse
free
Spool holder holder by vemotion
...spool holder holder by vemotion
thingiverse
pipe holder (16mm diameter)
thingiverse
free
smartphone holder with usb cable holder and key holder
...other of invention
this is my first creation basically smartphone holder with usb cable holder and key holder
i hope you like it
thingiverse
free
Holder of plate holders by budvar
...t; ;) holder for 5 pieces of modular plate holders from dave o https://www.prusaprinters.org/en/prints/15367-modular-plate-holder
thingiverse
free
Pen Holder/card holder by Pinky561
...pen holder/card holder by pinky561
thingiverse
a pen holder/card holder in one.
thingiverse
free
Toilet paper holder with phone holder
...toilet paper holder with phone holder
thingiverse
toilet paper holder with phone holder
thingiverse
free
Radio equipment holder and microphone holder
...radio equipment holder and microphone holder
thingiverse
radio equipment holder and microphone holder
thingiverse
free
Popsicle Holder Holder by billiamthesecond
...popsicle holder holder by billiamthesecond
thingiverse
keep popsicle holders upright so that they can be set down