Thingiverse
Volvo Prancing Moose Wheel Hub Center Cap by archimedesmp
by Thingiverse
Last crawled date: 3 years ago
I lost two of my wheel hub covers (due to brakes failing to open/running too hot), so I finally got around to designing some replacements. I didn't want to go with boring mono-color, so I added the prancing moose on top of it.
For the section holding it in the rims hole: Diameter of the base is 61.3 mm, and the depth is 10.3. On top of that sits the 1.4mm moose decal plate, which is a bit wider (d=63.3mm).
My wheels are 205/55 R16, but I don't know the exact rim type (came with my used car).
I believe you should be able to scale to the correct size (careful: your slicer will show you the 63.3mm outer diameter, but you need do the scaling using the 61.3mm!). For your convenience, I added a reduced test part.
The measures were taken from one of my remaining original Volvo wheel caps, which has a diameter of a little over 61.0mm. But since I wanted a more tight fit for the self-printed part I added 0.3mm. It now fits very tight and to remove it I probably have to remove the wheel, but that's good.
I also used six clips instead of four to improve the seating.
This is my first attempt at dual color! I read that true dual color printers need two STLs, but since I only have a single extruder that variant is untested. Feedback on that topic is appreciated.
CAREFUL: Brakes generate a lot of heat. I am not sure if PLA can withstand that, but I decided to give it a try for two prototypes. If you have ABS or another more heat resistant material (I don't), I recommend printing with that instead.
My extruder driver overheated during ironing (no idea why), so for the sample image, I smoothed out the non-ironed parts to give you a better impression of the part.
My findings after about 3000 km with these: None lost :), but after that time they are not tight enough anymore. If I get around to designing a second revision, this one will be 0.3 mm wider in diameter and the clips will get an additional 0.1 mm. Also, I'll might add some stabilizers on the inside (or just leave the infill inside). Else, PLA works fine for these :)
For the section holding it in the rims hole: Diameter of the base is 61.3 mm, and the depth is 10.3. On top of that sits the 1.4mm moose decal plate, which is a bit wider (d=63.3mm).
My wheels are 205/55 R16, but I don't know the exact rim type (came with my used car).
I believe you should be able to scale to the correct size (careful: your slicer will show you the 63.3mm outer diameter, but you need do the scaling using the 61.3mm!). For your convenience, I added a reduced test part.
The measures were taken from one of my remaining original Volvo wheel caps, which has a diameter of a little over 61.0mm. But since I wanted a more tight fit for the self-printed part I added 0.3mm. It now fits very tight and to remove it I probably have to remove the wheel, but that's good.
I also used six clips instead of four to improve the seating.
This is my first attempt at dual color! I read that true dual color printers need two STLs, but since I only have a single extruder that variant is untested. Feedback on that topic is appreciated.
CAREFUL: Brakes generate a lot of heat. I am not sure if PLA can withstand that, but I decided to give it a try for two prototypes. If you have ABS or another more heat resistant material (I don't), I recommend printing with that instead.
My extruder driver overheated during ironing (no idea why), so for the sample image, I smoothed out the non-ironed parts to give you a better impression of the part.
My findings after about 3000 km with these: None lost :), but after that time they are not tight enough anymore. If I get around to designing a second revision, this one will be 0.3 mm wider in diameter and the clips will get an additional 0.1 mm. Also, I'll might add some stabilizers on the inside (or just leave the infill inside). Else, PLA works fine for these :)
Similar models
thingiverse
free
Prancing Moose Volvo Emblem
... emblem
thingiverse
this is the prancing moose emblem, with the volvo wordmark. pictured are a 100% version, and a 150% version.
3dwarehouse
free
KITT wheel with hub cap and brake disk
...ouse
kitt wheel with hub cap and brake disk. 13x17' rim. #asb #car #inch #kitt #knight #parts #ride #rider #rim #rims #wheel
thingiverse
free
Volvo Prancing Moose Keychain MultiMaterial by michaelkuty
...volvo prancing moose keychain multimaterial by michaelkuty
thingiverse
multimaterial version
3dwarehouse
free
Tuning Wheel
...ic new rim (and realistic) with meduza's brake inside. #brake #hub #part #performance_tire #rims #rubber #tuning #tyre #wheel
thingiverse
free
Outdoor trailer wheel hub for 3dSets Wheels by Teal69
... withoud making the track wider. you have to use 2x long m4 screws to screw the wheels against the new "wheel hub nut".
3dwarehouse
free
Wheel
... '03 ford escape. i think it's a wal-mart hub but i'm not sure. brake by tom. #car #dilbert #escape #ford #rim #wheel
thingiverse
free
12 mm hex hub adapter for RC4WD crawler rims by bxd2000
...printing.
edit: added the 5-holes version and another version without holes with a small grove for the required diameter (17 mm).
grabcad
free
girder fork 135 mm travel
... mm travel
grabcad
girder fork for my custom bike project. modeled for dual brake downhill 20x110 hub and 19" moto rim size
grabcad
free
WHEEL HUB
...ake disc on a go kart's axle. dimensions:
wheelbase: 114 mm
hole diameter: 8 mm
material: alluminum alloy 7075-o(ss) (ergal)
3dwarehouse
free
Custom Rim #1 (updated)
... the update feel free to use it in your own models. #auto #car #custom #onderdelen #parts #rim #sjordo #tuning #velg #wheel #wiel
Archimedesmp
thingiverse
free
Cover plate for Chinese dual AK4490 DAC board by archimedesmp
...me faint noise with silence playing at maximum amplification (which would reach about 110db to 111db maximum spl with my system).
thingiverse
free
LED Tower - Lights for Anycubic Delta Kossel Linear Plus by archimedesmp
...rts if they wiggle too much, and most printers vibrate a lot!
for obvious reasons they should also not block your timing belts ;)
Prancing
3ddd
$1
Jonathan Adler / Prancing Horse Sculpture
...r
jonathan adler prancing horse sculpture
• unglazed porcelain on a wrought iron
• 45.72 cm high x 40.64 cm wide x 8.89 cm deep
3d_ocean
$89
Ferrari California
...2010 detailed 3d model. the ferrari california joins the prancing horse’s 8-cylinder family which has always been defined by...
3d_ocean
$89
Ferrari 458 Italia
...it’s equally true that in the course of the prancing horse’s history,...
free3d
free
Reindeer Prancing v1
...reindeer prancing v1
free3d
reindeer prancing v1 printable, low poly model.
thingiverse
free
The Prancing Pony sign by torstenni
...the prancing pony sign by torstenni
thingiverse
the prancing pony sign
thingiverse
free
Prancing Moose Volvo Emblem
... emblem
thingiverse
this is the prancing moose emblem, with the volvo wordmark. pictured are a 100% version, and a 150% version.
thingiverse
free
Prancing Pony
...ll or use the included stand for stand alone display. the image is fresh from print and no trimming done yet. i plan to paint it.
thingiverse
free
The Prancing Pony sign ( The Lord of the Rings ) by Hunted_One
...nd merry first met strider.
i had no green filament at home, so i used other colors.
http://lotr.wikia.com/wiki/the_prancing_pony
3d_sky
$8
Jonathan Adler / Prancing Horse Sculpture
...ler
jonathan adler prancing horse sculpture • unglazed porcelain on a wrought iron • 45.72 cm high x 40.64 cm wide x 8.89 cm deep
thingiverse
free
Volvo Prancing Moose Keychain MultiMaterial by michaelkuty
...volvo prancing moose keychain multimaterial by michaelkuty
thingiverse
multimaterial version
Moose
3ddd
$1
moose
...moose
3ddd
wooden toy moose
design_connected
free
Moose
...moose
designconnected
free 3d model of moose by vlaemsch () designed by big game.
3ddd
$1
MOOSE ON THE LOOSE
...moose on the loose
3ddd
вешалка
вешалка "moose on the loose"
3ddd
$1
Stuffed moose
...ose , чучело лося , голова
голова лося из гипса
3d_export
$35
moose
...loss, occlusion, and cavity maps are 4096. collada, fbx, and obj formats included. preview images rendered in real-time renderer.
3d_export
$35
Moose
...brush 3ds max ztool obj fbx dae 3ds stl properties : 20*20*20 production time : 1d 2 hours 391 gram models are drawn with zbrush.
3d_export
$49
Moose
... format. -textures jpeg- color,normal, and roughness maps -texture size 4096 x 4096 pxls. no special plugin needed to open scene.
turbosquid
$15
Christmas Moose
... model christmas moose for download as max, max, fbx, and obj on turbosquid: 3d models for games, architecture, videos. (1663486)
turbosquid
$3
Cartoon Moose
...l cartoon moose for download as blend, dae, fbx, obj, and stl on turbosquid: 3d models for games, architecture, videos. (1627212)
3ddd
$1
Moose Head
...moose head
3ddd
лось , голова
настенная скульптура
Volvo
3d_export
free
Volvo 245
...volvo 245
3dexport
old volvo 245
3ddd
free
Volvo S40
...я с volvo 340, затем были модели volvo 440/460 и в настоящее время – это volvo s40/v40. сегодня мы убеждены в том, что совершенно
3d_export
$5
Volvo FH750
...iently and comfort to reduce the load. the flagship of the industry and a real workhorse — this car has become even more perfect.
3d_ocean
$89
Volvo Tractor FM
...m heavy heavy high high industrial industrial tractor tractor truck truck vehicle vehicle volvo volvo
high detailed volvo tractor
turbosquid
$50
Volvo XC90R
...osquid
royalty free 3d model volvo xc90r for download as 3dm on turbosquid: 3d models for games, architecture, videos. (1578353)
turbosquid
$75
Volvo XC60
...oyalty free 3d model volvo xc60 for download as fbx and blend on turbosquid: 3d models for games, architecture, videos. (1280068)
3d_export
$5
Volvo logo 3D Model
...volvo logo 3d model
3dexport
volvo volvo car logo bus new parts truck
volvo logo 3d model dreamextrude 81900 3dexport
3d_export
$5
Volvo 745
...volvo 745
3dexport
3d_export
free
Volvo 240
...volvo 240
3dexport
3d_export
free
volvo 740
...volvo 740
3dexport
Hub
3d_export
free
hub
...hub
3dexport
realistic 3d model of hub. you can use this model in your automotive or mechanical projects.
design_connected
$4
Hub 02
...hub 02
designconnected
glas italia hub 02 dining tables computer generated 3d model. designed by piero lissoni.
turbosquid
$8
Electricity Hub
...id
royalty free 3d model electricity hub for download as fbx on turbosquid: 3d models for games, architecture, videos. (1298030)
turbosquid
$2
Gokart Hub
...bosquid
royalty free 3d model gokart hub for download as ige on turbosquid: 3d models for games, architecture, videos. (1497617)
turbosquid
free
Desert hub
...squid
free 3d model desert hub for download as blend and fbx on turbosquid: 3d models for games, architecture, videos. (1634736)
design_connected
$18
UMBRA Hub Ladder
...umbra hub ladder
designconnected
umbra hub ladder computer generated 3d model.
turbosquid
$48
hub-dxf
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$25
Shoulder Hub
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$20
BMX Hub
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_ocean
$5
Stairwell Hub
... is a low polygonal model. - poly count: 323 - formats: max /obj /fbx/3ds/dxf - high detail was preserved with 2048×2048 textu...
Cap
3ddd
$1
cap
...cap
3ddd
cap
cap
3d_export
$10
cap
...cap
3dexport
cap
archibase_planet
free
Cap
...cap
archibase planet
cloth cap clothes clothing
cap - 3d model (*.gsm+*.3ds) for interior 3d visualization.
3ddd
free
Cap
...cap
3ddd
cap , кепка. бейсболка
реалистичная кепка
archibase_planet
free
Cap
...cap
archibase planet
cap water-closet lid sanitary ware
cap 880961 - 3d model for interior 3d visualization.
archibase_planet
free
Cap
...cap
archibase planet
cap sanitary ware water-closet lid
cap 991861 - 3d model for interior 3d visualization.
archibase_planet
free
Cap
...cap
archibase planet
cloth cap head-dress hat
cap n110708 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Cap
...cap
archibase planet
wc cap water-closet lid
wc cap p5114 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Cap
...cap
archibase planet
wc cap water-closet lid
wc cap r3901 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Capping
...
archibase planet
chimney capping flue smoke-stack
chimney capping n020108- 3d model (*.gsm+*.3ds) for interior 3d visualization.
Wheel
archibase_planet
free
Wheel
...l steering control steering wheel
wheel ship steering wheel n060215 - 3d model (*.gsm+*.3ds+*.max) for exterior 3d visualization.
3d_ocean
$14
Wheel
...wheel
3docean
car rim car wheel rim wheel
high poly car wheel design. 16,840 polys
3d_export
free
wheel
...wheel
3dexport
wheel
3d_export
free
wheel
...wheel
3dexport
wheel
3d_export
free
Wheel
...wheel
3dexport
wheel
3d_export
$5
wheel
...wheel
3dexport
wheel for car.
3d_export
$5
wheel
...wheel
3dexport
car wheel
3d_export
$5
wheel
...wheel
3dexport
car wheel
3d_export
$5
wheel
...wheel
3dexport
car wheel
3d_export
$5
wheel
...wheel
3dexport
car wheel
Center
archibase_planet
free
Center
...center
archibase planet
cabinet desk office furniture
l-center - 3d model for interior 3d visualization.
3d_ocean
$9
Cultural center
...cultural center
3docean
academy architects building center cultural exteriors
cultural center academy
3ddd
$1
play center
...play center
3ddd
площадка
play center
3ddd
$1
kids center
...kids center
3ddd
площадка
kids center
3ddd
free
kids center
...kids center
3ddd
площадка
kids center
3d_export
$30
shopping center
...shopping center
3dexport
shopping center model with textures.
3d_export
$5
center table
...center table
3dexport
the center table for interior with texture and light
3d_export
$10
television center
...television center
3dexport
this is entertainment center for television and and other things you can put it.
3d_ocean
$5
Center table
...center table
3docean
center table main file are dxf, obj, 3ds max with maps.
3d_export
$7
business center
...business center
3dexport