Vive head mount mod by MartinsProjects

Last crawled date: 3 years, 4 months ago

Vive head mount mod
Parametric 3d-printable welding headband mod to replace the original Vive head strap.
All units are in millimeters

What you need for this mod
3M Speedglas 9100 Welding Headband, although might only need to tweak a few parameters to make the 3d-printed parts fit another brand.
2X screws that fit in the holes on the sides of the headband. The ones used for this headband are 5mm in diameter.
2X Wing nuts that fits the screws.

2X large diameter washers that covers enough area of the distance adjustment slots.

4X 3mm diameter width screws for connecting the printed parts with the HMD through the steel loops.
4X washers that cover some area around the 3mm screws on both sides.
2X 3mm diameter nuts.
Todo
Create design of top middle Velcro band.
Add detailed build instructions.
Revised design with built in On-ear headphones.

Also available on Github to fork or clone as soon as a new version gets pushed
https://github.com/martinsprojects/vive-head-mount