Vision Kit Camera Case Version 2

Last crawled date: 3 years, 3 months ago

This was a Freelancer project that I had gotten hired for. This is the second version of the case that I made. After the first version was taken care of there were some items that the client wanted to change. First, he wanted to have a different battery pack inside of the case. Second, he wanted to have a panel put in so to be able to take the batter in and out to change it.

The projected from my understanding focused on the Vision Kit (https://aiyprojects.withgoogle.com/vision) idea. However, I am not 100 percent sure due to the fact I was a sub-contracting, and I had limited information on the main project itself. The second version of this case is more refined, and that project post has more detail regarding the overall case build.

Just like the first version I finished this project in one day. It came out to roughly 8 hours of modeling. The first version can be found here at this link, https://grabcad.com/library/vision-kit-camera-case-version-1-1. I will say that I was significantly happier with the second version of the case. I learned how to generate better looking renders and many other things. This job was a gold mine of experience.

I did not model the electrical components in the case. Those were taken for GrabCAD community. The like to each model is going to be posted below.

One last note is about the AIY Vision Bonnet in the file. That is not 100 percent accurate to the board itself. I took that Raspberry Pi board and re molded it so to reflect the Vision Bonnet board. I was not able to find a CAD file of AIY Vision Bonnet. If you happen to know where to find one, please post a link in the comments.

https://grabcad.com/library/battery-holder-4xaa-1
https://grabcad.com/library/raspberry-pi-zero-w-1
https://grabcad.com/library/esp32-cam-1
https://grabcad.com/library/raspberry-pi-camera-module-v2-1