Thingiverse
Vintage Barn Pulley by plainolddave
by Thingiverse
Last crawled date: 3 years ago
This is a large old fashioned barn pulley.
It's for decorative purposes such as retro pendant lights or washing lines that need a vintage looking pulley. The pulley takes large rope or cable up to 25mm / 1 inch in diameter.
The overall size is 215mm high, 200mm wide, with a pulley size of 160mm diameter (about 6-1/4" round). Parts will comfortably print on a 200 x 200mm bed - just rotate the side pieces a little so they print on the diagonal.
As well as the printed parts, you'll need some nuts, bolts and washers:
2 x 5mm x 50mm pan head bolts for the side spacers
1 x 8mm x 50mm pan head bolt for the top hangar
plus washers and nyloc nuts.
If you choose to print the center pulley in two halves as I did, it can be glued and held together with 5 x 3mm x 18mm screws.
Its the first new thing I've posted for a couple of years so do hope you enjoy! Solidworks files are included - go nuts.
It's for decorative purposes such as retro pendant lights or washing lines that need a vintage looking pulley. The pulley takes large rope or cable up to 25mm / 1 inch in diameter.
The overall size is 215mm high, 200mm wide, with a pulley size of 160mm diameter (about 6-1/4" round). Parts will comfortably print on a 200 x 200mm bed - just rotate the side pieces a little so they print on the diagonal.
As well as the printed parts, you'll need some nuts, bolts and washers:
2 x 5mm x 50mm pan head bolts for the side spacers
1 x 8mm x 50mm pan head bolt for the top hangar
plus washers and nyloc nuts.
If you choose to print the center pulley in two halves as I did, it can be glued and held together with 5 x 3mm x 18mm screws.
Its the first new thing I've posted for a couple of years so do hope you enjoy! Solidworks files are included - go nuts.
Similar models
3dwarehouse
free
Low Poly Carriage Bolt
...
low polygon 5/16' diameter x 2-1/4' long round head carriage bolt with washer and nut #bolt #carriage_bolt #nut #washer
thingiverse
free
LM8UU Linear Bearing Puller by TechnoSwiss
...ger bolt if you can't push the new bearing in part way by hand.
printed at 0.21mm layer higher and 40% infill with esun pla.
thingiverse
free
Small wind turbine. Rotor Ø200mm 8 blades. Easy print version, no support needed. by brauky
...e with 8 blades. ø = 200mm.
easy print without supports.
you need:
1 x bolt m10 x 65
1 x large washers 10
1 x nut m10
1 x rod ø10
thingiverse
free
Pulley (Block and tackle) by stewartmiller
... the design at some point in the future by reducing the friction created by the faces of the wheels and possibly adding bearings.
3dwarehouse
free
Bolts and Hardware
...age bolt and hex head bolt, 1/2' x 3' length, with washers, lock washer and nut #bolt #hardware #lock_washer #nut #washer
thingiverse
free
Wanhao i3 X - idler upgrade - bolt reversed by Pumpal
...ll be the same as the factory.
you will need 2x m5 nylon nuts (can reuse the stock and get only 1 additional) and a 5x40 m5 bolt.
thingiverse
free
Ender 5 Pulley Bracket
...esigned it in to allow some adjustment after printing.)
parts used:
1 - m5x20 bolt
1 - m5x8 bolt
1 - m5 t-slot nut
4 - m3x8 bolts
thingiverse
free
Rope pulley katrol by wingmaster
...oto. they just fit without washers) or m4x30 (better) bolts
2x m4 lock nuts
4x m4 washers (optional)
2x bearing 624zz 4x13x5
thingiverse
free
Belt Tensioner X Axis Anet A6 by Kingmiwok
... m3x30 flat head bolts (anet a6 spare)
2x m3 nut (anet a6 spare)
(you will gain 3x nuts and 1x bolt from the parts you take out.)
thingiverse
free
Index Stock Easy to print only 4 pieces by Brock123
... bits
6 #8x3/4" pan head screws
2 - 1/4" x 3/4" bolts with nuts and 1" washers
zip tie and some sort of sling
Plainolddave
thingiverse
free
Darth Doorstop by plainolddave
...olddave
thingiverse
the name says it all... its darth..... the doorstop
kind of like a chalk outline except from the dark side
thingiverse
free
Batarang by plainolddave
...s in a different format just shout out in the comments section - happy to oblige (i use solidworks 'cause it works for me...)
thingiverse
free
Chalk Man Doorstop by plainolddave
...int so made a chalk outline of someone stuck under the door
solidworks source is included if you need to change it - go nuts...
thingiverse
free
The guy that did it... (doorstop) by plainolddave
...at did it!
it's in a 10mm thick version that could be stuck to the door if that's what you want, or a 20mm thick doorstop
thingiverse
free
Rugby Football Kicking Tee by plainolddave
...gh for the kids to kick it around
there's two versions - one with holes and one without. source files are included - enjoy
thingiverse
free
Death Star Birdhouse by plainolddave
...mixed as a christmas tree ornament here http://www.thingiverse.com/thing:117733
solidworks source files are included - go nuts!
thingiverse
free
Clarinet Stand by plainolddave
...ing out the pdf file on paper first and using scissors to cut out the template and check it'll fit your instrument ok
enjoy
thingiverse
free
Christmas Tree Ornament by plainolddave
...e to laser cutting, try 3d printing the middle from semi-translucent flouro filament
also posted solidworks zip files - enjoy!
thingiverse
free
Spray Can Pole Extension by plainolddave
...ogether with a cable tie). eventually just went with a 1" un-threaded socket for an ordinary broomstick - simple and strong.
Barn
3d_export
$5
barn
...barn
3dexport
barn
3d_export
$5
barn
...barn
3dexport
normal barn
3d_export
$5
barn
...barn
3dexport
barn with interior decoration
3ddd
$1
Pottery Barn
...pottery barn
3ddd
pottery barn , часы
pottery barn
3ddd
$1
Pottery Barn
...pottery barn
3ddd
pottery barn , декоративный набор
pottery barn
3ddd
free
Pottery barn
...pottery barn
3ddd
pottery barn , декоративный набор
pottery barn
3ddd
free
POTTERY BARN
...pottery barn
3ddd
pottery barn , декоративный набор
pottery barn
3ddd
free
POTTERY BARN
...pottery barn
3ddd
pottery barn , круглое
garden lattice mirror, pottery barn
3ddd
$1
Pottery Barn
...е , декоративный набор , украшение
pottery barn
3ddd
$1
Pottery barn
...е , декоративный набор , украшение
pottery barn
Pulley
3d_export
$1
pulley
...pulley
3dexport
3d_export
$30
Pulley export
...pulley export
3dexport
pulley export design render 3d modelling
3d_export
free
Pulley
...ort
this is a pulley<br>formats: ".3ds", ".fbx", ".obj", ".stl", "blend"
3d_export
$6
roller pulley
...r pulley
3dexport
this is the roller pulley 3d model its used for 3d printers and some other uses for toys and usefull things .
turbosquid
$2
aluminum pulley
...
royalty free 3d model aluminum pulley for download as sldpr on turbosquid: 3d models for games, architecture, videos. (1671716)
turbosquid
$29
pulley wheel
...d model pulley wheel for download as obj, wrl, fbx, and blend on turbosquid: 3d models for games, architecture, videos. (1319384)
turbosquid
free
Pulley.3ds
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_export
$10
design and assembly of pulley
...design and assembly of pulley
3dexport
design and assembly of pulley 3d model which is used for drive and driven
3d_export
$10
Pulley 3D Model
...y sewing sewingmachine c4d fbx metal
pulley 3d model download .c4d .max .obj .fbx .ma .lwo .3ds .3dm .stl dixiony 107270 3dexport
3d_export
$10
Pulley 3D Model
...trial machine c4d fbx cinema4d metal
pulley 3d model download .c4d .max .obj .fbx .ma .lwo .3ds .3dm .stl dixiony 107271 3dexport
Vintage
3ddd
$1
Люстра Vintage
...люстра vintage
3ddd
vintage
люстра vintage
3ddd
$1
Vintage Stool
...vintage stool
3ddd
vintage
vintage stool
3d_ocean
$12
Eglo vintage
...eglo vintage
3docean
eglo lamp eglo vintage eglo vintage lamp
eglo vintage, eglo vintage lamp,eglo lamp
3ddd
$1
Vintage LTGFRINEAM
...vintage ltgfrineam
3ddd
vintage
vintage арт. ltgfrineam
turbosquid
$1
vintage
...rbosquid
royalty free 3d model vintage for download as blend on turbosquid: 3d models for games, architecture, videos. (1415369)
3d_export
$30
vintage roadster
...vintage roadster
3dexport
vintage roadster
3d_export
$5
Vintage TV
...vintage tv
3dexport
vintage tv
3ddd
$1
Vintage Chair
...vintage chair
3ddd
vintage chair
3d_export
$5
vintage bike
...vintage bike
3dexport
vintage rusty bike.
3ddd
$1
vintage camera
...vintage camera
3ddd
фотокамера
vintage camera