Thingiverse
Vileda head socket strenghtened by oaba
by Thingiverse
Last crawled date: 3 years, 3 months ago
I had a broken head socket.
I broke off all the pieces. Sanded down to the base.
The base of the head socket is glued in to the handle. So I drilled 16mm hole in the middle.
I was drilling 4x3.5mm holes on the handle (from the side at the dents) for the securing screws.
I printed the socket head side way with support. (This way you will get the most strenght of it) Also modified the original. This has a larger OD. You can insert The printed socket in the 16mm hole. I drilled 1.5mm holes for the screws. And secure it on the side with screws.
I was printing it with 100 percent infill. To get the maximum strenght.
I broke off all the pieces. Sanded down to the base.
The base of the head socket is glued in to the handle. So I drilled 16mm hole in the middle.
I was drilling 4x3.5mm holes on the handle (from the side at the dents) for the securing screws.
I printed the socket head side way with support. (This way you will get the most strenght of it) Also modified the original. This has a larger OD. You can insert The printed socket in the 16mm hole. I drilled 1.5mm holes for the screws. And secure it on the side with screws.
I was printing it with 100 percent infill. To get the maximum strenght.
Similar models
thingiverse
free
Screw Handle by pyrolynx
...w's head straight. next, you need to cut the m4 thread into drilled hole and attach handle on hex.
fusion360 project applied.
thingiverse
free
Foam board corner hangers by Kcobbler
...ippy ties, string, or whatever you have.
if you use screws, you can drill out the front hole larger so the screw head is recessed
thingiverse
free
Left Barbie Prosthetic Leg by ajsenczy
...needs to be drilled, drill hole
-attach using a small nail, snip and secured sides with superglue
have fun with your new barbie!
thingiverse
free
Foredom hook for rackshelf by oaba
...edom hook for rackshelf by oaba
thingiverse
print it side way to get the maximum strenght.
and you have to use less support too.
thingiverse
free
Wilton Drill Press Crank Arm and Handle by aninias
...ton drill press crank arm and handle by aninias
thingiverse
created to use the m10x40 socket head cap screws that i had on hand.
thingiverse
free
Hotas Extension Remix
...ide. with the removal of the clamp hole, my usb controller should fit without having to worry about the switches bumping into it.
thingiverse
free
Strain Relief Cone for M3 Socket Head Screws by ElCorbo
...in abs to spread the load. i also printed them in a color that accented the copter. print as many as you need, they print quick.
thingiverse
free
Base with screw holes for mounting by jplasencia
...ecure the spool holder to the top of my enclosure. since you need to print two of these, this will equate to a total of 4 screws.
thingiverse
free
Ikea Lack Stacker/Extender with Screw Slot by wd5gnr
... not to overtighten the screws. i recommend not using a power driver unless you stop early and finish with a regular screwdriver.
thingiverse
free
Sliding Door Handle by kspring
...ully open.
i'm new to 3d printing and design so, as always, my designs are a work in progress and can be edited if desired.
Oaba
thingiverse
free
Foredom hook for rackshelf by oaba
...edom hook for rackshelf by oaba
thingiverse
print it side way to get the maximum strenght.
and you have to use less support too.
thingiverse
free
Foredom Chuck key clip by oaba
...foredom chuck key clip by oaba
thingiverse
i was always looking for my chuck key.
never ever again. :)
thingiverse
free
WSKEN Lite 1 upgrade to 2 by oaba
...wsken lite 1 upgrade to 2 by oaba
thingiverse
if your wsken always disconnecting.
uprade from v1 to v2
thingiverse
free
Holder for Foredom Fixed Slip Joint Handpiece H.30SJ by oaba
...ingiverse
i just did a quick design.
you can fit the hand piece with the tool in the chuck.
i printed it in pla. i used support.
thingiverse
free
Door Hinge for KETER shed by oaba
... wide tolerance for easy fit.
i printid it out of petg 0.3mm layer hight and 40% infill
i was adding support only for the bottom!
thingiverse
free
QIDI X-MAX magnetic bed leveling indicator mount by oaba
...inters and slicers settings!
the hole for the indicator 8mm you can drill it higher but do not forget higher wall thickness then.
thingiverse
free
Enclosure (Case) for DC 12V Fan Temperature Speed Controler by oaba
...ntroller can be purchased here.https://www.aliexpress.com/item/1005001388901396.html?spm=a2g0s.9042311.0.0.625f4c4dkhu1rl
enjoy !
thingiverse
free
Simple universal filament spool holder (customizable) by oaba
... in to the clips
i was adding countersink m5 thread. you can use it for mounting. or connect the 2 side and give extra rigidity.
thingiverse
free
ALLSOME 1050W BG-5157 Bench Drill Tachometer case. by oaba
... soldered)
i was connecting the brown cable to the switch top connector.
i used connectors everywhere for the future easy repair.
Vileda
3ddd
$1
Vileda virobi
...vileda virobi
3ddd
пылесос , робот
vileda virobi
3d_sky
$8
Vileda virobi
...vileda virobi
3dsky
vileda virobi
thingiverse
free
Runner for Vileda ironing board by martin_g
...runner for vileda ironing board by martin_g
thingiverse
runner for vileda ironing board (vileda viva express premium+).
thingiverse
free
Vileda cap
...vileda cap
thingiverse
original cap was lost so i need to design a new one.
thingiverse
free
Holder for VILEDA Steam mop by Fotonoska
...holder for vileda steam mop by fotonoska
thingiverse
holder for vileda steam mop
thingiverse
free
Gardena zu Vileda Mop Adapter by SteffenM
...gardena zu vileda mop adapter by steffenm
thingiverse
adapter zum verwenden eines gardena-stils an einem vileda wischmop.
thingiverse
free
Vileda / O-Cedar (O'Cedar) Mop - Broomstick adapter
...ademark of
freudenberg household products
thanks 2 vileda mop head adapter by aifredo for the basic design.
best to print in abs.
thingiverse
free
Vileda Mop Adaptor - Clothes Pole by dbbd
... pole by dbbd
thingiverse
got one of those vileda mop heads at home? turn that boring pole into a handy dandy clothes line pole!
thingiverse
free
Replacement part for Vileda mop by faisca2000
... middle with a nut for reinforcement.
to remove the old part and insert the new one, just heat the mop handle with a hot air gun.
thingiverse
free
Vileda Eco-Logic 5x1 hinge repair cubo basura by jfmateos
...by jfmateos
thingiverse
replacement hinge for vileda eco-logic 5x1 trash bin
bisagra para el cubo de basura vileda edo-logic 5x1
Strenghtened
thingiverse
free
Butterfly for M6 nut, strenghtened by Gelisob
...ke that but missing a place where the nut goes, so i made the place and added a little rim to give it more strenght when turning.
thingiverse
free
upgrade remix of lens cap for slr 52mm scaleble, now updated with strenghtened weak points by PRATRIK
...nion
for your size use (your lens diameter)/52 = multiplication factor
ex: 58/52 = 1.11.5
multiply with 1.11 or 111% for 58mm
thingiverse
free
stepper motor leveler by karl1964
...stepper motor leveler by karl1964
thingiverse
i just needed to strenghten mt printer under the stepper motors.
thingiverse
free
Folgertech FT-5 X-Carriage and idler upgrade by tdchaos
...se
this is an upgraded x idler and carriages.
carriages uses m3-35 for strenghtening and m3-6 to hold the 608 bearings in place.
thingiverse
free
Reittec Polisher Thicker Legs/arms by Gunslinger59
...nd time). strenghten the front legs/arms by glueing these over the top of the existing ones.
hope i saved you some frustration ;)
thingiverse
free
Reinforced Z Motor holder for BQ Hephestos Prusa i3 by MijabaFPV
...einforce the z motor fixation to use the four screws instead of only 3. it will provide more stability and strenghten the z axis.
thingiverse
free
Prusa Lack Enclosure - Door Handles by jonnieZG
...lip while inserting the plexiglass, so i made this strenghtened remix. there is also a remix for 5 mm...
thingiverse
free
Nerf MP5 PDW Stock Like (3 part easy print remix) by Z0r4n
...nt it in 2 parts because my 3d printer couldn't print the whole thing (well 3 with the small part to strenghten the assembly)
thingiverse
free
Old Space Dweller Tank by TheZomby
...old space dweller tank by thezomby thingiverse a remix/rescalled/strenghtened version of an available model. scalled for my other...
Socket
archibase_planet
free
Socket
...socket
archibase planet
socket plug socket wall outlet
socket - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Socket
...socket
archibase planet
socket
socket - 3d model for interior 3d visualization.
archibase_planet
free
Socket
...socket
archibase planet
socket plug socket wall outlet
socket n210411 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Socket
...socket
archibase planet
socket plug socket wall outlet
socket 1 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Socket
...socket
archibase planet
socket plug socket wall outlet
socket 3 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Socket
...socket
archibase planet
socket plug socket wall outlet
socket 4 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Socket
...socket
archibase planet
socket plug socket wall outlet
socket 2 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Socket
...socket
archibase planet
socket plug socket wall outlet
socket triple - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Socket
...socket
archibase planet
socket plug socket wall outlet
socket single - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Socket
...socket
archibase planet
socket plug socket wall outlet
socket twin - 3d model (*.gsm+*.3ds) for interior 3d visualization.
Head
3d_export
$5
head
...head
3dexport
simulated female head.
3d_ocean
$5
Deer Head
...deer head
3docean
deer head
simple model of deer head with neck.
cg_studio
$25
Marble Head - Head A3d model
... - head a3d model
cgstudio
.ma - marble head - head a 3d model, royalty free license available, instant download after purchase.
turbosquid
$5
Head
...ad
turbosquid
royalty free 3d model head for download as max on turbosquid: 3d models for games, architecture, videos. (1230068)
turbosquid
free
The Head
...urbosquid
royalty free 3d model the head for download as max on turbosquid: 3d models for games, architecture, videos. (1386205)
turbosquid
free
Head
...
turbosquid
royalty free 3d model head for download as blend on turbosquid: 3d models for games, architecture, videos. (1276899)
3d_export
$10
bull head
...bull head
3dexport
bull head
3d_export
$5
girl head
...girl head
3dexport
head girl
3d_export
$5
Tigger-head
...tigger-head
3dexport
tigger-head
3d_export
$5
head on a spear
...head on a spear
3dexport
head on a spear