Thingiverse
Vertex Standard VXD-720 bike bracket by timmay
by Thingiverse
Last crawled date: 3 years ago
I have printed and used the -001 version. If using PETG, print with a wall thickness such that the walls will print fairly solid. The one that I printed was at .5mm thick walls. At this setting, it is almost vase mode. While PETG is fairly strong material, the thing did not withstand really bumpy roads. It cracked at the top, and was not stiff enough to retain the radio on the bottom, as it flexed too much. If you need to use this thing for an event, consider using some sort of strap to attach the radio to the bracket (rubber band, hook and loop strap, or maybe paracord).
Redesign considerations at this point: 1. Longer, to move the CG lower into the 'cup'. 2. Adding a cutout for the belt clip boss. 3. once the cutout for the clip boss is added, an anti-vibration spring will be added, similar to the one I put on the bike bracket for the ID51a. 4. because this radio is substantially heavier than any of my other radios, I may add a clip that goes over the front to add some support.
Note, do not print version -000. I printed one and will be making adjustments to the model. it fits the radio too tight due to the plastic flaring on the battery. I will be readjusting the slot location, and adding another slot for the after market battery (sundely), which has a shorter belt clip. *
After working events with my ID-51a, I was asked if I had a DMR radio, and could I work bicycle sweep for this event. This thing was rushed together, but should work. I marked it thing in progress, as I have not printed it yet. I think it should also work with the xpr-6550, as the batteries are interchangeable. This bracket only interfaces the battery and the attached belt clip. The clone battery will need another slot added, as it was shorter than the vertex one.
I will be printing in PETG as with the ID-51a bracket. It will be secured with zip ties and have strips of silicone rubber between it and the handlebars. When I get time, I will create a model of some tpu strips that lock into the bracket.
Yes, the radius is different on each leg. It is to compensate for the shape of my handle bars on my bike as you get farther from the center, they taper. I have a 2017 Specialized sirus carbon sport U.S. edition, with the radio mounted on the right side.
-001 - I added 1mm through the center to make it wider to miss the bump in the side of the battery. Moved the lower slot up, made it narrower, and added the second slot for the generic battery. I removed the -000 file. For 000, I printed it upside down. The droop from the clear span was not bad at all. I sliced in cura, printed in pronterface. No supports. Bed at 60, head at 240, on glass with aquanet as release agent.
Redesign considerations at this point: 1. Longer, to move the CG lower into the 'cup'. 2. Adding a cutout for the belt clip boss. 3. once the cutout for the clip boss is added, an anti-vibration spring will be added, similar to the one I put on the bike bracket for the ID51a. 4. because this radio is substantially heavier than any of my other radios, I may add a clip that goes over the front to add some support.
Note, do not print version -000. I printed one and will be making adjustments to the model. it fits the radio too tight due to the plastic flaring on the battery. I will be readjusting the slot location, and adding another slot for the after market battery (sundely), which has a shorter belt clip. *
After working events with my ID-51a, I was asked if I had a DMR radio, and could I work bicycle sweep for this event. This thing was rushed together, but should work. I marked it thing in progress, as I have not printed it yet. I think it should also work with the xpr-6550, as the batteries are interchangeable. This bracket only interfaces the battery and the attached belt clip. The clone battery will need another slot added, as it was shorter than the vertex one.
I will be printing in PETG as with the ID-51a bracket. It will be secured with zip ties and have strips of silicone rubber between it and the handlebars. When I get time, I will create a model of some tpu strips that lock into the bracket.
Yes, the radius is different on each leg. It is to compensate for the shape of my handle bars on my bike as you get farther from the center, they taper. I have a 2017 Specialized sirus carbon sport U.S. edition, with the radio mounted on the right side.
-001 - I added 1mm through the center to make it wider to miss the bump in the side of the battery. Moved the lower slot up, made it narrower, and added the second slot for the generic battery. I removed the -000 file. For 000, I printed it upside down. The droop from the clear span was not bad at all. I sliced in cura, printed in pronterface. No supports. Bed at 60, head at 240, on glass with aquanet as release agent.
Similar models
thingiverse
free
Carabiner with Bag strap holder
....
i guess a good print is core in petg+carbon fiber , mobile closing part and inside clip part in petg
added the fusion 360 files
thingiverse
free
National Panasonic GX500 / RF-1130LB / Cougar113 belt clip by MaartenCustomDesigns
... out. i have not tried printing this in any material other than abs, i doubt pla will work but nylon should be a good option too.
thingiverse
free
belt clip battery mount for DIY Quest 2 Elite Strap by taluego
...trap by taluego
thingiverse
belt clip for external battery
i used this model for clip https://www.thingiverse.com/thing:2041949
thingiverse
free
VX5r belt clip by bricket
...vx5r belt clip by bricket
thingiverse
to replace broken belt clip for the yeasu vx5r ht ham radio.
printed in petg
thingiverse
free
Seal Line backpack strap clip by mattbeechan
...and have made a derivative from what i have learned from using them. you can find it here http://www.thingiverse.com/thing:147854
thingiverse
free
VHF radio mount thing. by eddiema
...ded a hole so the shorter uhf clip can be clipped in but it is a sloppy fit.
i guess an adapter could be made to improve this.
thingiverse
free
Generic Belt Clip Adaptor by cathalgarvey
...te nicely, and could either be printed independently of another item and glued/welded on, or attached to a model before printing.
thingiverse
free
Battery plate with slots for battery strap
...giverse
this is my remix of orignal battery plate design from musa. added the battery strap slots for attaching the 2200mah cell
thingiverse
free
Strap Clip by teriyakipuppy
...ieces that will stick together after printing.
i might be making a longer version to manage straps that are wider, in the future.
thingiverse
free
Car battery bracket to hold shorter 74Ah battery instead of longer - 100Ah one by glassy
...lcome to tip me:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=u25v96gznvl3n&source=url
thank you!
Vxd
3dwarehouse
free
VXD
...vxd
3dwarehouse
sfd
3dwarehouse
free
vxd cv
...vxd cv
3dwarehouse
dsf #dsfd
3dwarehouse
free
2010 Endominium VXD
...the sphere and made it into the trailer hitch. #2010 #cliff #edge #endominium #ford #four #land #suv #truck #vehicle #vxd #wheels
3dwarehouse
free
2010 Endominium VXD EXT Tiger
...m vxd ext tiger
3dwarehouse
original by me and rogue. desert terrain by •btm. lighting effects by me. rear crossbars by me, too.
3dwarehouse
free
ggg
...ggg 3dwarehouse vxd ...
3dwarehouse
free
Trailer Hitch
...3dwarehouse a simple trailer hitch. #endominium #for #hitch #trailer #vxd ...
3dwarehouse
free
2010 Endominium Cliff EXT Tigrera
...my 2010 endominium vxd. #2010 #2011 #cliff #cliff_x #endominium #vxd ...
Timmay
thingiverse
free
army cot foot, square by timmay
...ut this thing print so fast, i decided to print two. the one shown on its side has the build plate side up. it cleaned up nicely.
thingiverse
free
reese bike rack strap by timmay
...ver the tires. i have not printed it yet. i will be printing in tpu. i made it smaller than 200mm, so it should print on any bed.
thingiverse
free
Speaker Grill for Adafruit enclosed speaker by timmay
... speaker better for its potential environment. at this point this is no longer a remix, as it is a new design from the bottom up.
thingiverse
free
Grill for Adafruit Speaker Set (re-mix) by timmay
...rinted in pla, 210, 60 bed. 0.2 layer, 30% infill. no supports, no raft. i print on glass with purple aquanet - thanks tobycwood.
thingiverse
free
Grill for Adafruit Speaker Set (remix - 2) by timmay
...printed in pla, 210, 60 bed. 0.2 layer, 30% infill. no supports, no raft. i print on glass with purple aquanet - thanks tobycwood
thingiverse
free
ID51 bike bracket by timmay
... shorter tie. i might add something to keep the radio from being able to move front to back to keep it from rattling on the road.
thingiverse
free
iPhone X (with case) bike mount - flex by timmay
...i am pretty satisfied with the phone pocket. next iteration of the phone pocket will be to accommodate round cross-section stems.
3dwarehouse
free
timmay
...timmay
3dwarehouse
720
3ddd
$1
italamp 720\6, 720\ap5
...italamp 720\6, 720\ap5
3ddd
italamp
люстра,бра italamp 720\6, 720\ap5
design_connected
$16
720 Lady
...720 lady
designconnected
720 lady computer generated 3d model. designed by zanuso, marco.
3ddd
$1
720 lady
...720 lady
3ddd
cassina
1200x1200
turbosquid
$25
720-lady
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$5
Xbox 720
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$79
Nokia Lumia 720
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$20
Nokia Lumia 720, 520
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_export
$16
Nokia Lumia 720 3D Model
...e cellular mobile computer phone iphone android 3d 4g lte wireless wi-fi display
nokia lumia 720 3d model denisvfx 66940 3dexport
3d_export
$60
Architecture 720 3D Model
...lege campus max street landscape commercial building medical hospital offices
architecture 720 3d model lotusmodel 49105 3dexport
turbosquid
$11
Sigma 720 Series Lavatory Set
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
Vertex
3d_export
$10
vertex decorative003
...vertex decorative003
3dexport
vertex decorative_003
3d_export
$10
vertex decorative001
...vertex decorative001
3dexport
vertex decorative_001
turbosquid
$5
Vertex Pendant
...uid
royalty free 3d model vertex pendant for download as stl on turbosquid: 3d models for games, architecture, videos. (1565161)
turbosquid
$5
Vertex Coaster
...uid
royalty free 3d model vertex coaster for download as stl on turbosquid: 3d models for games, architecture, videos. (1565158)
3ddd
$1
Vertex von Vondom
...vertex von vondom
3ddd
vondom
vertex von vondomhttp://www.vondom.com/producto/52/0/vertex/
turbosquid
$3
Vertex Set
...d model vertex vondom set for download as usdz, gltf, and fbx on turbosquid: 3d models for games, architecture, videos. (1599323)
3ddd
$1
VONDOM / VERTEX
...vondom / vertex
3ddd
karim rashid , vondom
designer - karim rashid
3d_export
$15
Vondom Vertex 3D Model
...d model
3dexport
vondom vertex table chair plastic seat furniture furnishing
vondom vertex 3d model rogojin.denis 87870 3dexport
3ddd
$1
VONDOM / VERTEX
..., karim rashid , vondom
designer - karim rashid
3ddd
$1
BUFFET VERTEX
...nical specification :
height 65 cm , width 150 cm , depth 43 cmhttp://www.oppa.com.br/buffet-vertice-4-portas-amarelo
Bike
3d_ocean
$18
Bike
...bike
3docean
bicycles bike sports transport
3d model bike
3d_export
$5
bike
...bike
3dexport
bike
3d_export
$50
bike
...bike
3dexport
3d bike model
turbosquid
free
bike-bike-rack
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
archibase_planet
free
Bike
...bike
archibase planet
bike bicycle cycle
bike n161113 - 3d model (*.gsm+*.3ds+*.max) for exterior 3d visualization.
archibase_planet
free
Bike
...bike
archibase planet
bike bicycle cycle
bike and rack n220613 - 3d model (*.gsm+*.3ds+*.max) for exterior 3d visualization.
archibase_planet
free
Bike
...rchibase planet
bike bicycle cycle two-wheeled bicycle
bike n031213 - 3d model (*.gsm+*.3ds+*.max) for exterior 3d visualization.
archibase_planet
free
Bike
...rchibase planet
bike bicycle cycle two-wheeled bicycle
bike n180714 - 3d model (*.gsm+*.3ds+*.max) for exterior 3d visualization.
3d_ocean
$35
Batpod Bike
...cean
batman batman bike batpod bike bike motorcycle stylish bike
detailed model of a famous batpod bike used in the movie batman.
3d_export
$5
exercise bike
...exercise bike
3dexport
exercise bike, spin bike, bike, gym equipment, exerciser
Bracket
archibase_planet
free
Bracket
...bracket
archibase planet
bracket corbel holder
bracket 1 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Bracket
...bracket
archibase planet
bracket corbel console
bracket 5 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Bracket
...bracket
archibase planet
corbel holder bracket
bracket 6 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Bracket
...bracket
archibase planet
bracket corbel console
bracket 8 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Bracket
...bracket
archibase planet
bracket corbel holder
bracket n280911 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Bracket
...bracket
archibase planet
holder corbel bracket
bracket 9 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Bracket
...bracket
archibase planet
corbel holder bracket
bracket 10 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Bracket
...bracket
archibase planet
corbel console bracket
bracket 11 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Bracket
...bracket
archibase planet
holder console bracket
bracket 12 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Bracket
...bracket
archibase planet
bracket corbel holder
bracket 13 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
Standard
3ddd
$1
STANDARD LAMP
...standard lamp
3ddd
classic standard lamp
3d_export
free
standard router
...3dexport
hi! welcome to our store. this is a standard 3d model of standard router. you can use this 3d model for free. regards!!
design_connected
$18
Standard Chair
...standard chair
designconnected
vitra standard chair computer generated 3d model. designed by prouvé, jean.
design_connected
$18
Standard SR
...standard sr
designconnected
vitra standard sr computer generated 3d model. designed by prouvé, jean.
3ddd
$1
Ideal Standard / Skanitet
...ideal standard / skanitet
3ddd
ideal standard
производитель ideal standard, серия skanitet
design_connected
$29
Arca Standard
...connected
photo-realistic 3d models of the arca standard bed from alivar for 3d architectural and interior design presentations.
3ddd
$1
Ideal Standard Melange
...ideal standard melange
3ddd
ideal standard
смеситель ideal standard melange.
приятного пользования.
3ddd
free
Ideal Standard / Reflections
... раковина , унитаз
ideal standard reflections коллекция
vizpark
$50
Standard Walls
...f 20 highly detailed brick multitextures for architectural visualization, with bump, displacement, reflection and diffuse layers.
3d_export
free
standard monitor
...tor
3dexport
hi! welcome to our store. this is a standard 3d model monitor for pc. you can use this 3d model for free. regards!!