Valkyrie-250 quadcopter by dani1498

Last crawled date: 3 years ago

250 quadcopter frame
There are two types of frames the V and X type, in the X type the front and the back arms are 1 piece, while on the V type there are 4 different arms, I still haven't printed it so i don't know which one is better, as soon as i'll print it i'll let you know.
-V type, you need:
x4 v-arms
x2 v-arm lock
x1 top
x1 v-bottom
x8 spacer
x1 fpv camera(if you have one)(10 degrees inclination)
x1 hd camera(if you have one)
X type, you need:
x4 x-arms
x2 x-arm lock
x1 top
x1 x-bottom
x8 spacer
x1 fpv camera(if you have one)(10 degrees inclination)
x1 hd camera(if you have one)
MY SETUP:
-Motors: BG2204 2300KV Brushless Motor x2 CW and X2 CCW
( http://www.banggood.com/Eachine-Racer-250-Drone-Spare-Part-BG2204-2300KV-Brushless-Motor-CWCCW-p-1007680.html)
-ESCs: BL20A x4
(http://www.banggood.com/BL20A-OneShot-125-OPTO-2-4s-Mini-Brushless-20A-BLHeli-ESC-For-FPV-QAV180-250-p-1023318.html)
-Flight controller: CC3D
(http://www.banggood.com/it/Spedix-CC3D-Flight-Controller-Connected-Directly-To-DSM2-DSMX-Satellite-S_Bus-p-977491.html)
-Propellers: Kingkong 5040
(http://www.banggood.com/it/10-Pairs-KINGKONG-5040-Propellers-For-QAV250-p-1000415.html)
-Fpv setup: Eachine 700TVL
(http://eu.banggood.com/it/Wholesale-Warehouse-Eachine-700TVL-13-Cmos-FPV-110-Degree-Camera-w32CH-Transmission-wp-Eu-965760.html)
For the look i took inspiration from the Peon230 (http://www.thingiverse.com/thing:629338)