Thingiverse
upcycle Masterspool dasFilament by techam
by Thingiverse
Last crawled date: 3 years, 1 month ago
Warning!
Seems like the Refills have a smaller inner Diameter than the old Spools and therefor the Refills from DasFilament do not fit on the modified Spools.
Sorry for everybody who printed this Design and had to notice this flaw.
I will leave the Design here, maybe somebody can use it for something different, have fun remixing!
As I really like the idea of Masterspool, it botherd me, to invest around 250g of Filament and 15h of printingtime for every spool.
With all the Material and Electricity used for that, it's propably worse for the enviroment, than a standard injectionmolded Spool wich is recycled after use.
So I dicided to upcycle my old empty spools from dasFilament!
I cut them in half, sothat I can put refillpacks on them and with the printed cernel I close them back together.
The spool is cutted with an angle, sothat the halfs can't rotate relativly to each other and it makes seperating the halfes very easy, by removing the Bold and twisting the two spoolhalfs. They push apart on their own!
As dasFilament used two differend types of spools in the last years, I made differend Nuts, one for the older alphaplastic spools with 53mm ID and 55mm wide
And one for the newer Häfner-spools with 52.5mm ID and 53mm wide
But the fit of course every other spool with the same measurements.
Have fun using your upcycled empty Spool to save the enviroment!
Seems like the Refills have a smaller inner Diameter than the old Spools and therefor the Refills from DasFilament do not fit on the modified Spools.
Sorry for everybody who printed this Design and had to notice this flaw.
I will leave the Design here, maybe somebody can use it for something different, have fun remixing!
As I really like the idea of Masterspool, it botherd me, to invest around 250g of Filament and 15h of printingtime for every spool.
With all the Material and Electricity used for that, it's propably worse for the enviroment, than a standard injectionmolded Spool wich is recycled after use.
So I dicided to upcycle my old empty spools from dasFilament!
I cut them in half, sothat I can put refillpacks on them and with the printed cernel I close them back together.
The spool is cutted with an angle, sothat the halfs can't rotate relativly to each other and it makes seperating the halfes very easy, by removing the Bold and twisting the two spoolhalfs. They push apart on their own!
As dasFilament used two differend types of spools in the last years, I made differend Nuts, one for the older alphaplastic spools with 53mm ID and 55mm wide
And one for the newer Häfner-spools with 52.5mm ID and 53mm wide
But the fit of course every other spool with the same measurements.
Have fun using your upcycled empty Spool to save the enviroment!
Similar models
thingiverse
free
Masterspool bolt with 608 bearings by Lenbitz
...remixed to fit 608 bearings so it can be fitted on an 8mm threaded rod. this is to be used with an old plastic spool cut in half.
thingiverse
free
minimal MasterSpool by PlRASP
... spool-less filament from dasfilament). everything is stable if pushed together, exept for the lable plate, wich needs some glue.
thingiverse
free
Masterspool Re-mix/Redesign
...nes who ran on the edges of the spool.
for the filament as a refill i use das filament: https://www.dasfilament.de
happy printing
thingiverse
free
(Master-)Spool Upcycle-Adapter by 3dHonk
...-3.
the screw adapter i printed mostly without infill. only for the bottom i used some.
in the end i got the weight down to 98g.
thingiverse
free
1kg Masterspool - 3DTomorrow Filament
...do so via the following links:https://3dtomorrow.com/product/masterspool-pla/https://3dtomorrow.com/product/masterspool-silk-pla/
thingiverse
free
MasterSpool Minimalist - Veracity 1kg by compwizard7
...92mm (7.56in)
minimum spool id: 100mm (3.94in)
minimum bed size required:
ring spool: 200mm x 200mm
non-ring spool: 152mm x 175mm
thingiverse
free
Reuse old spool with 54 mm Adaptor (for refill filament) by B3rTriot
...center. the adaptor work fine.
new: i add a new part to fit the econofil refill with the adaptator. i add space for the tie wrap.
thingiverse
free
Bolt for DIY Masterspool by TomusC
...pool cut in half.
edit: made the hole a little bigger so it fits on the ender-2 spoolholder without removing the spoolholder nut.
thingiverse
free
eSun spool to MasterSpool adaptor (incomplete) by superjamie
...a circle, to use even less filament and line up better.
openscad source is provided if you'd like to finish this concept off.
thingiverse
free
Spool-eco by highlife22
...e fusion 360 file so you can edit if you wich.
i don't have other spool in hand, feel free to ask another size for your need.
Techam
thingiverse
free
Maglite holder by techam
...aglite, your flashlight is always within reach.
edit 9.4.2017:
added a version with countersunk hole on request for direct mount.
thingiverse
free
Beer bottle advent calendar by techam
...these easy clic-on numbers for beer bottles you can make one out of a beer crate.
they print easy and fit on regular bottle caps.
thingiverse
free
Pfaff 96 and other Engine pusher by techam
... be easy on the rubberdrive, breaks after the years.
this part replaces it.
have fun with your awesome highquality sewingmachine!
thingiverse
free
Kitchen Spongeholder by techam
...ign by adding some rips, so that the sponge also dries from the bottomside.
these rips are included into the file spongeholder_v2
thingiverse
free
RC Flying Wing Fuselage for small Printers by techam
...thin walls of that cg-circles, sothat it made holes from it, i added a stl of two 10mm cricular plates that fit into these holes.
thingiverse
free
Raspberry Pi 3 Fan Holder by techam
...erature of 20°c.
the difference is enourmous with over 30°c after 5 times doing the benchmark and staying on one level at 47.2°c.
thingiverse
free
Maglite Pegboard holder by arychj
...me, but credit for the hard work goes to: @techam / www.thingiverse.com/thing:1747635 (maglite holder rounded) @mother-of-crafts-3d / www.thingiverse.com/thing:2468358 (pegboard...
thingiverse
free
Kitchen spongeholder by Bouss31
...spongeholder by bouss31 thingiverse the original kitchen spongeholder by techam was almost the one i was wondering, expect that...
Dasfilament
thingiverse
free
DasFilament Spool Guide by serioustk
...had the problem that the filemt went off the spool by itself when the spool was new, i created this to snap in and avoid knotting
thingiverse
free
DasFilament Refill Adapter for Kaisertech PLA Rolls by Wi_Zeus
...ile is attached and the design can be easily modified with the correct parameters
https://www.dasfilament.de/filament-refill/?p=1
thingiverse
free
minimal MasterSpool by PlRASP
...of filament (the extra on the spool-less filament from dasfilament. everything is stable if pushed together, exept for the...
thingiverse
free
MasterSpool - Remixed Design by MisterFloyde
...thingiverse creatred a design remix of the masterspool by dasfilament from...
thingiverse
free
Fred The Frog - MMU / Multicolor by Bendermk6
...colours. i used pla from dasfilament in “grüngold”, “reinorange”, “dasfilament grün” and...
thingiverse
free
Optocouplers case for proximity sensors by Extraball
...sensors by extraball thingiverse nozzle: 0,6 material top: f10113 dasfilament material bottom: f10104 dasfilament 2 holes to mount the...
thingiverse
free
Huge Twisted Star Vase by WF3D
...by wf3d thingiverse printed in translucent green pla by dasfilament check out more details here:...
thingiverse
free
Slim twisted star vase by WF3D
...by wf3d thingiverse printed in infinity blue pla by dasfilament and toms3d. check out more details here:...
thingiverse
free
FrSky Taranis gimbal protector by jubidev
...sticks measures in at 8.1mm. i´ve printed them with dasfilament ...
Masterspool
thingiverse
free
Masterspool para filamento TECNIKOA
...masterspool para filamento tecnikoa
thingiverse
masterspool para filamento tecnikoa
thingiverse
free
MasterSpool - Remixed Design by MisterFloyde
...masterspool - remixed design by misterfloyde
thingiverse
creatred a design remix of the masterspool by dasfilament from scratch.
thingiverse
free
Masterspool holder by bubblefish
...simple holder for the masterspool,
its printed with petg with 20% infill,
the version 1 is not very good, the version 2 is better
thingiverse
free
3DS Masterspool Minimal
...s universal auto-rewind spool holder, then the re-winder axle nuts can get a grip on the cardboard hub when it is tightened down.
thingiverse
free
Masterspool by tuxmakesthings
...t and print time, and to have a filament catch that doesn't have the filament end poke into any plastic bag used for storage.
thingiverse
free
MasterSpool Refill light version v2
...masterspool refill light version v2
thingiverse
light version of masterspool with increased gaps between thread.
thingiverse
free
Masterspool - Twist and Lock - with bearings by banolka
...ool - twist and lock - with bearings by banolka
thingiverse
remix of masterspool - twist and lock by 3d-workshop to fit bearings
thingiverse
free
3D SOLUTECH MASTERSPOOL by 3Dsolutech
...r instagram 3dsolutech and receive promotions on 3d solutech filaments.
feel free to ask us any questions at info@3dsolutech.com
thingiverse
free
MasterSpool V4 for SpannerHands Spool System by Dravpnir
... richrap modified to be easily used in the spannerhands spool system. idea came from chrizlle with his mod on the masterspool v3.
thingiverse
free
1kg Masterspool - 3DTomorrow Filament
...do so via the following links:https://3dtomorrow.com/product/masterspool-pla/https://3dtomorrow.com/product/masterspool-silk-pla/
Upcycle
3d_export
$28
Upcycled Bicycle Chain Chandeliers 3D Model
...t
chandelier bicycle chains model fontoura carolina upcycled bike
upcycled bicycle chain chandeliers 3d model kein 78900 3dexport
3ddd
$1
Vintage 1950s Bartholomew Cocktail Chair
...vintage 1950s bartholomew cocktail chair 3ddd vintage upcycle vintage 1950s bartholomew cocktail chair - charcoal grey underground...
3ddd
$1
Valve Lamp by H&H
...если не про то не выкладывать industrial black steel upcycle red valve & red cord pendant...
3ddd
$1
Alta Caixa side table by Azadeh Shladovsky
...working on a line of fashion accessories made from upcycle materials and a collection of ceramic lighting sculptures with...
3d_ocean
$16
Pallet bed for bedroom interior
...pallet pillow platform platform bed recycle recycling reuse stripes upcycle 3d model of a pallet (palette) bed with pillows...
3d_export
$28
ottomans bench l luxury hallway bench furniture
...room furniture, furniture vintage, shabby chic furniture, farmhouse furniture, upcycle furniture, ottomans, bedroom ottoman, end of bed seating, end...
thingiverse
free
Upcycled cardboard (Grass) by OLBA3D
...upcycled cardboard (grass) by olba3d
thingiverse
upcycled cardboard named grass.
cardboard ø73mm.
thingiverse
free
Upcycled Cardboard (Lava) by OLBA3D
...upcycled cardboard (lava) by olba3d
thingiverse
upcycled cardboard named lava.
cardboard ø73mm.
sketchfab
$5
Lamp - Soda Can Upcycling Project
... as a project for upcycling. - lamp - soda can upcycling project - buy royalty free 3d model by fabio orsi (@fabioorsi) [b5e0b01]
thingiverse
free
Upcycled Birkenstock E-Concertina by Saiman
...oller. for further information about the e-concertina please have a look into the "econcertina_documentation.pdf" file.