Universal Tool-Mount Plate for MPCNC by dintid

Last crawled date: 3 years ago

Compatibility
I created it for F525 but it should work for most models. Please let me know.
1. august - v2 model
m4 mount holes are spaced evenly along the length, so doesn't matter how you fasten it to your MPCNC. (top and bottom are the same)
Removed some rounded edges in one end, which could pose a problem for ABS printing.
Created an image showing the dimensions
Note: I have not completely buildt my CNC yet, and thus havn't tested this mount in action yet.
All m4 and m5 bolts and nuts fits fine though.
Old and new
I've remixed the F-ToolMount stl file in Tinkercad.
The 4x mountholes have same placement.
The 4x mountholes now accomodate full M5 bolts and heads.
The Tool-Mount front faceplate is now level to accomodate most standard toolmounts.
Faceplate has rows of mounting-holes for m4 bolts.
The Mounting-holes on the faceplate is spaced with 23mm center to center of each other
There are cut-outs for standard m4 nuts on the backside for each mounting-hole.Why this remix?
I found it rather difficult to make adapters for the original Mount-Plate.
I wanted 1 plate strong enough to mount full-sized Spindles, but also with versatility to easily attach tiny pens, syringes and anything else.