Universal and Logitech Cam Support for Anet A6 by fierland

Last crawled date: 3 years, 1 month ago

Universal Camera Support for Anet A6
A holder to connect my old Logitech QuickCam Pro 5000 to my Anet A6 printer. Based on the Camera mount by Bolukan in https://www.thingiverse.com/thing:2735440 to connect the camera.
You can make it as long as you want with extra sections of 5, 10 and 15cm.
Use M3 screws to connect the sections.
Extra is a frame to mount a led strip on to light your work, in my case the lights are controlled by a Raspberry Pi running Octoprint.
New version 0.2:
forgot to make space between the parts to compensate for printing :-( and moved the clamp to the side of the frame. Having the clamp in the front made it collide with the front section of the printer frame.
Version 0.3:
Made room for the baseplate thumbwheel.
Version 1.0:
YES final version. Made clamp thicker and stronger. Added sunken space for nuts. Added connector that is a bit higher to have room for the lighting frame. (This is the one in the Picture)
03.04.18: reuploded the connector part to the cam. There where indeed still some errors in the STL.
Version 1.1:
Replaced the logitech webcam with a cheap HD webcam which has a much higher resolution and better low light capabilities. So needed a new cam support. Also created a new shorter arm as the lens is more wide angle. And renamed the project to universal cam support