GrabCAD
Ultimate Magic Wand with Tricks (200mm)
by GrabCAD
Last crawled date: 1 year, 11 months ago
WIP -Photos of tricks to come, and anything else I can think of...
This is the Ultimate Kids Magic Wand !!
By reading further you must agree to keep the magic secret (but it can be told to your apprentice...)
Do you agree?
Well do you?
Are you sure?
Ok I take it that you have thought long and hard about it, and have agreed!
Wahoo !!
Welcome to the other side of Magic!
Building your 'Wand'!
This is the ultimate magic wand and tho it may look like 3 wands to the untrained eye all magicians know it is really the same wand. ;)
Things to Note:
Parts have been made to fit firmly in most cases, a slight sanding, drill or glue may be required. (dependent on your printer)
**Construction wand 1**
Printed Parts:
1x Wand Body
2x Standard End
1x Tight Fit Tip
1x Soft Fit Tip
1x Plug
Parts:
Elastic (Looped multiple time for strength) or Jelly Elastic 1mm
1 X Tubular magnets 4mm x 4mm
Glue (for magnets)
Hint:
Feed elastic through once then back up, stretch thread and tie off (must be a firm fit)
Elastic seems to bounce back nicer but frays a bit after some use (Jelly Elastic may not to bounce back as nicely but won’t fay)
**Construction wand 2**
Printed Parts:
1x Wand Body
1x Standard End
1x Hollow End
1x Tight Fit Tip
1x Soft Fit Tip
2x Magnet Holder
1x Plug
Parts:
Elastic (Looped multiple time for strength) or Jelly Elastic 1mm
3 X Tubular Magnets 4mm x 4mm
Glue (for Magnets)
Tinsel 5mm x 5mm or something Shiny
Hint:
Feed elastic through once then back up and tie off (must be a loose fit)
Make sure poles of magnets are the correct way around before gluing…. yeah oops
**Construction wand 3**
Printed Parts:
1x Mini Body
2x Mini Tip
Parts:
glue
Stick:
Printed Parts:
Stick
Hint : This isn't required as you can use a pencil instead
The Magic!
Bellow are just a few tricks than can be achieved with this 'Wand' but of course this is just the beginning
**Trick 1 Growing wand**
Required:
watch or band
long sleeves
Small purse with hole in Bottom corner
Wand 1
Mini wand
Setup:
Cut small hole in back corner of purse or box (to fit Wand 1)
Tuck Wand under watch band
Trick:
Small Wand is placed in purse and a big wand is pulled out of small purse
How to:
Show off small wand which is too small for Big Magic
Pick up purse and place hole corner over hidden wand
Place small wand in purse
Pull big wand through hole and out of purse
Magic!
Accept the adoration of your audience and any goats that are offered.
**Trick 2 Floating wand**
Required:
Wand 1 or 2
Setup:
None
Trick:
Wand Sticks to hand miraculously
How to:
Hold wand in right hand
Grip the right wrist left hand (except pointer finger that will hold the wand)
Open right hand
Magic!
Accept the Esteem and Love of your audience with slight nod of knowing how good you really are
**Trick 3 Floating wand next level**
Required:
Wand 1 or 2
watch or band
long sleeves
Stick
Setup:
Tuck printed stick (or a pencil) under watch band
Trick:
Wand Sticks to hand miraculously (and you are not even holding your wrist)
How to:
Hold wand in right hand
With Left hand pull out stick to hold the wand (should still also be under band)
Open right hand
Magic!
Accept the Reverend silence of a shocked audience with slight rise of the eyebrow of a Master Magician
**Trick 4 Rubber wand**
Required:
Wand 1
Setup:
None
Trick:
The wand looks like it is made of rubber
How to:
Hold wand between thumb index finger ¾ down the wand loosely
Move hand up and down slowly
Magic!
Accept the inundation of applause knowing your audience’s childlike wonder has not peaked until this day
**Trick 5 Sticky Wand**
Required:
Wand 1
Paper Clip
Audience Member
Setup: Add a pile of Paper clips to the table
Trick: Wand placed on paper clips and they magically stick, wand gives audience member and nothing happens
How to:
Ask for an audience member
Place wand on paper clip (Magnetic end of Wand 1)
Take off paper clip
Hand directly to audience member (So Non Magnetic end is pointing out)
Get Audience Member to pick up paper clips…Nothing
Magic!
Watch your dumbfound audience try to grapple with your amazing mind numbing magic ability
**Trick 6 Rising Wand**
Required:
Wand 1
Setup:
None
Trick:
The wand rises by itself, no matter how much you tell it off after pushing it down it rises
How to:
Set Right hand into the shape of a karate chop
Take the elastic end of wand 1 and place it between your index and middle finger facing back of hand
Place wand in palm of hand holding wand with thumb
Press down on top of wand with left hand and hold in place with right thumb
Loosen right thumb and the wand should rise
Repeat (and tell it off for moving)
Let go of elastic end and re-fit to wand
Magic!
Accept the crowds roaring laughter knowing that this day your audience knows what true joy really is!
**Trick 7 Ghost Wand**
Required:
Wand 1
Black thread one end tied to a knot the other end tied button on shirt
Glass Bottle with small neck
Setup:
Wear Shirt that has a button with a thread dangling down (knot at the end)
Trick: Wand moves at its own free will and no hands
How to:
Slip knot in to elastic end of wand (open wand end and close it on knot)
Place Wand in Bottle
Move your body back and forth slowly and the wand should rise and fall without touching it
Magic!
Calm the hysteria created by the Ghost Wand, pick any weak willed people that have fainted (maybe providing a cool glass of water) and promise that the ghost will not come back and that the shock they received will ease in time… and accept the shocked applause
**Trick 8 Wand through a Note**
Required:
Wand 2
$5 Note or handkerchief
Setup:
None
Trick:
Wand is pushed through a note and ripped off with no harm to the note
How to:
Hold the long end of the wand in one hand hiding the missing end
Hold the Short end in the other hand hidden
Pick up note and say you're going to push your wand through it
Push Wand from heel of hand on one side of note
Line up other end of wand and they should join magnetically Wand-Paper-Wand
Show it off
Then rip the wand sideways (and the note should be gone with no rip and the wand still connected)
Magic!
Watch the audience’s faces turn from the horror of defacing a note to absolute relief and nirvana, when the note has no damage then stand back for the standing ovation as roses are thrown on stage from your many many worshipers and admires
**Trick 9 Final Finnish Sparkles**
Required:
Wand 2
Cut 5mm squared tinsel, or sparkles (but will get everywhere!)
Setup:
Open Wand 2 container end
Fill end with tinsel (don’t pack it hard!)
Close end
Trick:
Waving the wand in the air produces a shower of golden sparkles
How to:
Open end
Swing wand gently in the air in circles (Sparkles should come out automatically)
Close End
Magic!
Take a bow and accept the audiences undying love and gratitude, and take their tears of joy as a clinching proof that you are a master Magician, accept any offers of marriage or money (where applicable)
After the lights have gone down and the cheering has died away and you sit in your mansion that was paid for by your amazing Magical Talent maybe just maybe you could throw a copper my way, remembering this is where it all started …. I won’t complain. :)
http://www.thingiverse.com/thing:1822383
This is the Ultimate Kids Magic Wand !!
By reading further you must agree to keep the magic secret (but it can be told to your apprentice...)
Do you agree?
Well do you?
Are you sure?
Ok I take it that you have thought long and hard about it, and have agreed!
Wahoo !!
Welcome to the other side of Magic!
Building your 'Wand'!
This is the ultimate magic wand and tho it may look like 3 wands to the untrained eye all magicians know it is really the same wand. ;)
Things to Note:
Parts have been made to fit firmly in most cases, a slight sanding, drill or glue may be required. (dependent on your printer)
**Construction wand 1**
Printed Parts:
1x Wand Body
2x Standard End
1x Tight Fit Tip
1x Soft Fit Tip
1x Plug
Parts:
Elastic (Looped multiple time for strength) or Jelly Elastic 1mm
1 X Tubular magnets 4mm x 4mm
Glue (for magnets)
Hint:
Feed elastic through once then back up, stretch thread and tie off (must be a firm fit)
Elastic seems to bounce back nicer but frays a bit after some use (Jelly Elastic may not to bounce back as nicely but won’t fay)
**Construction wand 2**
Printed Parts:
1x Wand Body
1x Standard End
1x Hollow End
1x Tight Fit Tip
1x Soft Fit Tip
2x Magnet Holder
1x Plug
Parts:
Elastic (Looped multiple time for strength) or Jelly Elastic 1mm
3 X Tubular Magnets 4mm x 4mm
Glue (for Magnets)
Tinsel 5mm x 5mm or something Shiny
Hint:
Feed elastic through once then back up and tie off (must be a loose fit)
Make sure poles of magnets are the correct way around before gluing…. yeah oops
**Construction wand 3**
Printed Parts:
1x Mini Body
2x Mini Tip
Parts:
glue
Stick:
Printed Parts:
Stick
Hint : This isn't required as you can use a pencil instead
The Magic!
Bellow are just a few tricks than can be achieved with this 'Wand' but of course this is just the beginning
**Trick 1 Growing wand**
Required:
watch or band
long sleeves
Small purse with hole in Bottom corner
Wand 1
Mini wand
Setup:
Cut small hole in back corner of purse or box (to fit Wand 1)
Tuck Wand under watch band
Trick:
Small Wand is placed in purse and a big wand is pulled out of small purse
How to:
Show off small wand which is too small for Big Magic
Pick up purse and place hole corner over hidden wand
Place small wand in purse
Pull big wand through hole and out of purse
Magic!
Accept the adoration of your audience and any goats that are offered.
**Trick 2 Floating wand**
Required:
Wand 1 or 2
Setup:
None
Trick:
Wand Sticks to hand miraculously
How to:
Hold wand in right hand
Grip the right wrist left hand (except pointer finger that will hold the wand)
Open right hand
Magic!
Accept the Esteem and Love of your audience with slight nod of knowing how good you really are
**Trick 3 Floating wand next level**
Required:
Wand 1 or 2
watch or band
long sleeves
Stick
Setup:
Tuck printed stick (or a pencil) under watch band
Trick:
Wand Sticks to hand miraculously (and you are not even holding your wrist)
How to:
Hold wand in right hand
With Left hand pull out stick to hold the wand (should still also be under band)
Open right hand
Magic!
Accept the Reverend silence of a shocked audience with slight rise of the eyebrow of a Master Magician
**Trick 4 Rubber wand**
Required:
Wand 1
Setup:
None
Trick:
The wand looks like it is made of rubber
How to:
Hold wand between thumb index finger ¾ down the wand loosely
Move hand up and down slowly
Magic!
Accept the inundation of applause knowing your audience’s childlike wonder has not peaked until this day
**Trick 5 Sticky Wand**
Required:
Wand 1
Paper Clip
Audience Member
Setup: Add a pile of Paper clips to the table
Trick: Wand placed on paper clips and they magically stick, wand gives audience member and nothing happens
How to:
Ask for an audience member
Place wand on paper clip (Magnetic end of Wand 1)
Take off paper clip
Hand directly to audience member (So Non Magnetic end is pointing out)
Get Audience Member to pick up paper clips…Nothing
Magic!
Watch your dumbfound audience try to grapple with your amazing mind numbing magic ability
**Trick 6 Rising Wand**
Required:
Wand 1
Setup:
None
Trick:
The wand rises by itself, no matter how much you tell it off after pushing it down it rises
How to:
Set Right hand into the shape of a karate chop
Take the elastic end of wand 1 and place it between your index and middle finger facing back of hand
Place wand in palm of hand holding wand with thumb
Press down on top of wand with left hand and hold in place with right thumb
Loosen right thumb and the wand should rise
Repeat (and tell it off for moving)
Let go of elastic end and re-fit to wand
Magic!
Accept the crowds roaring laughter knowing that this day your audience knows what true joy really is!
**Trick 7 Ghost Wand**
Required:
Wand 1
Black thread one end tied to a knot the other end tied button on shirt
Glass Bottle with small neck
Setup:
Wear Shirt that has a button with a thread dangling down (knot at the end)
Trick: Wand moves at its own free will and no hands
How to:
Slip knot in to elastic end of wand (open wand end and close it on knot)
Place Wand in Bottle
Move your body back and forth slowly and the wand should rise and fall without touching it
Magic!
Calm the hysteria created by the Ghost Wand, pick any weak willed people that have fainted (maybe providing a cool glass of water) and promise that the ghost will not come back and that the shock they received will ease in time… and accept the shocked applause
**Trick 8 Wand through a Note**
Required:
Wand 2
$5 Note or handkerchief
Setup:
None
Trick:
Wand is pushed through a note and ripped off with no harm to the note
How to:
Hold the long end of the wand in one hand hiding the missing end
Hold the Short end in the other hand hidden
Pick up note and say you're going to push your wand through it
Push Wand from heel of hand on one side of note
Line up other end of wand and they should join magnetically Wand-Paper-Wand
Show it off
Then rip the wand sideways (and the note should be gone with no rip and the wand still connected)
Magic!
Watch the audience’s faces turn from the horror of defacing a note to absolute relief and nirvana, when the note has no damage then stand back for the standing ovation as roses are thrown on stage from your many many worshipers and admires
**Trick 9 Final Finnish Sparkles**
Required:
Wand 2
Cut 5mm squared tinsel, or sparkles (but will get everywhere!)
Setup:
Open Wand 2 container end
Fill end with tinsel (don’t pack it hard!)
Close end
Trick:
Waving the wand in the air produces a shower of golden sparkles
How to:
Open end
Swing wand gently in the air in circles (Sparkles should come out automatically)
Close End
Magic!
Take a bow and accept the audiences undying love and gratitude, and take their tears of joy as a clinching proof that you are a master Magician, accept any offers of marriage or money (where applicable)
After the lights have gone down and the cheering has died away and you sit in your mansion that was paid for by your amazing Magical Talent maybe just maybe you could throw a copper my way, remembering this is where it all started …. I won’t complain. :)
http://www.thingiverse.com/thing:1822383
Similar models
thingiverse
free
Incense stick holder by carlomick
...l hole with a 2mm drill in the back part to hold your incense sticks.
beware that a little support is required on the right hand.
thingiverse
free
Magic Coin Set by creepermort
...ll be shown and the audience will think the coin has transformed. pictures below
for more tricks check out evan era tv on youtube
thingiverse
free
Mystery box by millylaforet
...magic.
you need a small round magnet (diameter 10mm and 1 m height), a metal ring and
i use wire from office clips for the hinges
thingiverse
free
Twist-Off Bottle Opener by lkolbly
...k to a fridge)
note: you may have to rotate the object 180 degrees around the x axis in order to print it on the large flat side.
thingiverse
free
Toilet Seat Glue Stick Holder
...toilet seat glue stick holder
thingiverse
stick a magnet on the back and attach it to your 3d printer to hold your glue stick.
3dwarehouse
free
Magic wand of light
...magic wand of light
3dwarehouse
a magic wand with a light crystal at the end of it. it is approximately 1 foot long.
cg_trader
$15
Harry Potter with his wand magic stick | 3D
...harry potter with his wand magic stick | 3d
cg trader
harry potter with his wand (magic stick)
thingiverse
free
Car iPhone 11 Pro Max Holder (w cutout for magnetic plate)
...ave this hold onto the magnetic mount instead of placing the plate on your phone and making it look ugly.
~will update with pics~
thingiverse
free
Ultimate Magic Wand with Tricks by Mfurball
...x for the growing wand trick
added a new star wand end (for the extra little magicians)
added a video demonstration of the how-to
thingiverse
free
Whirligig Flying Spinner - Flies 30 ft (10 m) by maurerpe
...don't want the stick to stay in; the extra weight will cause it to not fly as far).
stick launched version flies 20 ft (6 m).
Wand
3d_export
$5
fairy wand - magic wand - nature wand - flower wand
...airy wand - magic wand - nature wand - flower wand
3dexport
fairy wand / magic wand / nature wand / flower wand high poly models
3d_export
$6
wood wand
...rved last year. i modelled it in blender and textured it in quixel mixer. 4k maps: albedo, roughness, normal, metalness, emission
turbosquid
free
Magic Wand
...wand
turbosquid
free 3d model magic wand for download as fbx on turbosquid: 3d models for games, architecture, videos. (1709285)
turbosquid
$11
Skull Wand
... free 3d model skull wand for download as blend, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1520687)
turbosquid
free
Magic Wand
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
free
Magic wand
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
free
Magic Wand
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_export
$12
Magic wand 3D Model
...magic wand 3d model
3dexport
wand magic 3d model
magic wand 3d model happy3d 3420 3dexport
3d_ocean
$5
Magician Hat and Wand
...and has 256 quad polygons. use subdivision to increase render detail and to smooth geometry. the object has the materials defi...
turbosquid
$10
Black Magic Wand
...
turbosquid
royalty free 3d model wand for download as blend on turbosquid: 3d models for games, architecture, videos. (1367373)
200Mm
turbosquid
$5
Rolson 200mm Wrench 3D Model
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$1
Rectangular Tiles (500mm x 200mm)
...s (500mm x 200mm) for download as max, 3ds, dxf, fbx, and obj on turbosquid: 3d models for games, architecture, videos. (1597872)
turbosquid
$1
Rectangular Tiles (200mm x 250mm)
...s (200mm x 250mm) for download as max, 3ds, dxf, fbx, and obj on turbosquid: 3d models for games, architecture, videos. (1597869)
3d_export
$25
Rolson 200mm Wrench 3D Model 3D Model
...0mm wrench 3d model 3d model
3dexport
rolson wrench tool adjustable
rolson 200mm wrench 3d model 3d model rooboy3d 84200 3dexport
3d_export
$10
BERLINER 200mm
... 2022 pro. and also asset have printable stl file include size is 20cm length and with gltf online model viewer file also include
3d_export
$10
Auto 200mm beams are finished with metal siding 3D Model
...ект архитектура cottage house design architecture
auto 200mm beams are finished with metal siding 3d model dmbarov 83933 3dexport
3d_ocean
$10
Canon Zoom Lens EF 70-200mm 1:2.8 L IS II USM
...ring. additionaly the project rebuilt for blender internal engine. format like *.max wasn’t setup with the materials, but it c...
3ddd
$1
Paul Neuhaus / KITO 6197-55
...silver ceiling spotlight with rotatable head. drop: 320mm width: 200mm x 200mm requires: 1x 11w gu10...
3ddd
free
Корабельный фонарь
...модель: делал по фотографии. производитель не известен. размеры : w-200mm d-160mm,...
3ddd
$1
Bookworm by Kartell
...bookworm итальянской фабрики kartell, размеры: высота(h)1700mm, ширина (w)3200mm, глубина (d)200mm ...
Ultimate
turbosquid
$3
Ultimate Grave
...model ultimate grave for download as blend, obj, stl, and fbx on turbosquid: 3d models for games, architecture, videos. (1636144)
turbosquid
$79
ULTIMATE GIRAFFE
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$5
The Ultimate Bowl
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$1
Ultimate Revolver
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3ddd
$1
Kimera Ultimate DVD System
...kimera ultimate dvd system
3ddd
dvd
schneider kimera ultimate dvd system
cg_studio
$49
The Ultimate Lioness3d model
... model
cgstudio
.max .obj .fbx - the ultimate lioness 3d model, royalty free license available, instant download after purchase.
turbosquid
$5
Ultimate Brick Castle
...yalty free 3d model ultimate brick castle for download as fbx on turbosquid: 3d models for games, architecture, videos. (1335247)
turbosquid
$31
Zombie Ultimate pack
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$8
Barrels Ultimate Pack
...ls ultimate pack for download as ma, max, obj, fbx, and blend on turbosquid: 3d models for games, architecture, videos. (1353281)
turbosquid
$25
Ultimate "F" Bomb
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
Magic
3d_export
$5
bottle magic
...bottle magic
3dexport
magic bottle to set magic scenes
3ddd
$1
Magic hole
...magic hole
3ddd
magic
дизайнерское кресло magic hole
3ddd
free
MAGIC / Ivory
...magic / ivory
3ddd
856633 151218 , magic
итальянская спальня magic ivory
3ddd
$1
MAGIC MIRROR
...magic mirror
3ddd
зеркало magic mirror
3d_export
$5
Apple setImac-Magic keyboard-Magic mouse
...apple setimac-magic keyboard-magic mouse
3dexport
apple set standard(white/grey) imac/magic keyboard/ magic mouse
3ddd
$1
Magic Hole
...magic hole
3ddd
philippe starck
magic hole - дизайн philippe starck (2010)
3ddd
free
палатка Blacks Magic
... blacks , magic
палатка производителя blacks, модель magic
3d_export
$13
magic trackpad
...yboard, magic mouse and magic trackpad at $33. you can save $19 by purchasing the full set. thank you for purchasing this model!!
3ddd
$1
HTC Magic
...htc magic
3ddd
телефон , htc
моделька коммуникатора htc magic. в архиве obj и max файлы
3d_export
free
table magic
...table magic
3dexport
Tricks
design_connected
$16
Hat Trick
...hat trick
designconnected
knoll hat trick computer generated 3d model. designed by gehry, frank.
turbosquid
$5
Trick or Treat Zombie
...
royalty free 3d model trick or treat zombie for download as on turbosquid: 3d models for games, architecture, videos. (1217649)
3ddd
$1
Книжная полка трансформер Trick
... sakura adachi
книжная полка трансформер trick от sakura adachi.
общие габариты: 1400х900х450
3ddd
free
Trick bookcase
...рмер
стол+ стулья+ книжные полки
материалы: бук, береза, дуб, ясень.
размеры: 130х 38х 77 см.
сайт производителя: www.sakurah.net
turbosquid
$20
Jimmy Choo Trick 110
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$30
Hat Trick and Face Off Table
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3ddd
$1
Trick — книжная полка трансформер от Sakura Adachi
... книжная полка в едином теле. дизайнер sakura adachi разработал данный проект специально для итальянского производителя campeggi.
3d_export
$28
cartoon spring gloves - trick toy
...cartoon spring gloves - trick toy
3dexport
texture size:512px number of texture:1 texture format: png
3ddd
free
Hay WH Rope Trick
...
materials:
woven pet, aluminium, acrylic, steel, abs
1 led 2700 k 965lm (@350ma) cri80-w
supply: mains power cord 220-240v ac
turbosquid
$22
ROPE TRICK LAMP Designed by Stefan Diez 5 Colors
...y stefan diez 5 colors for download as max, max, fbx, and max on turbosquid: 3d models for games, architecture, videos. (1558201)