Thingiverse
Ultimate Hemera Partcooler With Spaceship Airduct
by Thingiverse
Last crawled date: 4 years, 3 months ago
This is an adaptation of the popular Spaceship fan duct for the new E3D Hemera extruder, along with some further advancements and goodies!
Features
Extremely high air flow. I was able to cool PLA decently at only 40% fan power.
Tested using the water displacement test (5th picture). The center of airflow is neatly positioned right below the nozzle.
Optional frontplate which features a mounting point for an LED breakout and a slide switch so you may illuminate your prints.
Optional Sunon version of the duct. I have found that Sunon fans have a slightly larger dimensions and the standard duct dimensions don't fit well. I would highly recommend their fans though!
Required Components
1x 50mm Radial Fan - I personally use Sunon fans.
2x-4x M3x10 screw, countersunk - Required for mounting the frontplate onto the Hemera motor. I mount mine using all 4 screws, but you can probably get away with less.
2x-4x M3 nuts, square shaped - Same as above, required for mounting.
2x M3x20 screw - Required for mounting the part cooling fan. You can probably use any kind of screws for this. I use screws with hex heads along with washers.
Optional 1x LED breakout - I use this one: Link (tme.eu)
Optional 1x Slide switch - I use this one: Link (glaxio.co.uk)
Optional 1x 2.5mm 12mm long wood screw, countersunk - Required for mounting the LED breakout.
Optional ?x Wires - Some wires to wire up the optional LED part. :)
Parts To Print:
1x Frontplate.stl OR Frontplate_LED.stl - The frontplate is required to mount the part cooling fan. There are two options. The normal frontplate is just there to mount the fan, while the LED version has a slot for a slide switch and a mounting point for an LED module. This can be wired to the regular Hemera cooling fan to provide some nice lighting on the model as it is printing.
1x Airduct.stl OR Airduct_Sunon.stl - This is the popular Spaceship fan duct, modified to dimensionally fit the Hemera. If you have a Sunon part cooling fan, use that version instead.
Optional 1x V6_Dismounter.stl - This is an extra part I have added, which you can use to disassemble your old V6 hotends to move the parts over to your new Hemera extruder instead. :)
Printing Instructions
The regular frontplate doesn't need supports, but all other parts do. If printing the LED version of the frontplate, use plenty of supports as part of the mount will be floating in the air. The airduct needs supports as well. Be careful to avoid printing supports inside of the actual horns, as they will be nearly impossible to remove.
Print all parts exactly as already oriented to maximize quality, strength and ease of printing.
You may use 20% infill for all parts.
You may print all parts at 0.2mm layer height.
Assembly Instructions
Choose which parts you want to print (as explained above) and print them.
If using the LED version of the frontplate:
Do the wiring/soldering of the LED module and the switch before installing.
LED module is installed onto the frontplate below using the small wood screw.
Switch is friction fitted into the slots above.
Please refer to the 4th picture to get the idea of how wiring works.
Insert the square nuts into the Hemera motor and secure the frontplate onto it using 2-4 M3x10 countersunk screws.
Slide the airduct onto the part cooling fan you will be using. Use the Sunon airduct if you have a Sunon fan.
Screw the part cooling fan onto the frontplate using 2 M3*20 screws of your choice.
V6 Dismounter Instructions
Want to disassemble your V6 hotends? First, remove the whole frontplate.
Use 2 square nuts and 2 M3x10 countersunk screws to install the dismounter.
Plug in your old hotend, heat up and disassemble!
I hope you enjoy this part cooler system, and if you have any questions or found some issues, be sure to comment! I will see what I can do!
NOTE: You might notice the "NR" on my duct. This is short for "Nightmare Rarity" which is my printer. I have decided not to include this logo in the final STLs, but you can easily cut your own logo or whatever you want in Blender.
As usual, I have also included the Blender file in case you want to edit it further.
Features
Extremely high air flow. I was able to cool PLA decently at only 40% fan power.
Tested using the water displacement test (5th picture). The center of airflow is neatly positioned right below the nozzle.
Optional frontplate which features a mounting point for an LED breakout and a slide switch so you may illuminate your prints.
Optional Sunon version of the duct. I have found that Sunon fans have a slightly larger dimensions and the standard duct dimensions don't fit well. I would highly recommend their fans though!
Required Components
1x 50mm Radial Fan - I personally use Sunon fans.
2x-4x M3x10 screw, countersunk - Required for mounting the frontplate onto the Hemera motor. I mount mine using all 4 screws, but you can probably get away with less.
2x-4x M3 nuts, square shaped - Same as above, required for mounting.
2x M3x20 screw - Required for mounting the part cooling fan. You can probably use any kind of screws for this. I use screws with hex heads along with washers.
Optional 1x LED breakout - I use this one: Link (tme.eu)
Optional 1x Slide switch - I use this one: Link (glaxio.co.uk)
Optional 1x 2.5mm 12mm long wood screw, countersunk - Required for mounting the LED breakout.
Optional ?x Wires - Some wires to wire up the optional LED part. :)
Parts To Print:
1x Frontplate.stl OR Frontplate_LED.stl - The frontplate is required to mount the part cooling fan. There are two options. The normal frontplate is just there to mount the fan, while the LED version has a slot for a slide switch and a mounting point for an LED module. This can be wired to the regular Hemera cooling fan to provide some nice lighting on the model as it is printing.
1x Airduct.stl OR Airduct_Sunon.stl - This is the popular Spaceship fan duct, modified to dimensionally fit the Hemera. If you have a Sunon part cooling fan, use that version instead.
Optional 1x V6_Dismounter.stl - This is an extra part I have added, which you can use to disassemble your old V6 hotends to move the parts over to your new Hemera extruder instead. :)
Printing Instructions
The regular frontplate doesn't need supports, but all other parts do. If printing the LED version of the frontplate, use plenty of supports as part of the mount will be floating in the air. The airduct needs supports as well. Be careful to avoid printing supports inside of the actual horns, as they will be nearly impossible to remove.
Print all parts exactly as already oriented to maximize quality, strength and ease of printing.
You may use 20% infill for all parts.
You may print all parts at 0.2mm layer height.
Assembly Instructions
Choose which parts you want to print (as explained above) and print them.
If using the LED version of the frontplate:
Do the wiring/soldering of the LED module and the switch before installing.
LED module is installed onto the frontplate below using the small wood screw.
Switch is friction fitted into the slots above.
Please refer to the 4th picture to get the idea of how wiring works.
Insert the square nuts into the Hemera motor and secure the frontplate onto it using 2-4 M3x10 countersunk screws.
Slide the airduct onto the part cooling fan you will be using. Use the Sunon airduct if you have a Sunon fan.
Screw the part cooling fan onto the frontplate using 2 M3*20 screws of your choice.
V6 Dismounter Instructions
Want to disassemble your V6 hotends? First, remove the whole frontplate.
Use 2 square nuts and 2 M3x10 countersunk screws to install the dismounter.
Plug in your old hotend, heat up and disassemble!
I hope you enjoy this part cooler system, and if you have any questions or found some issues, be sure to comment! I will see what I can do!
NOTE: You might notice the "NR" on my duct. This is short for "Nightmare Rarity" which is my printer. I have decided not to include this logo in the final STLs, but you can easily cut your own logo or whatever you want in Blender.
As usual, I have also included the Blender file in case you want to edit it further.
Similar models
thingiverse
free
AM8/E3D Hemera Rear Mount Part 5015 Cooling Fan - Mount and Duct
...hat doesn't block the fan.
the pillow block will likely need to be tapped to fit the screw that you use. i used an m4 screw.
thingiverse
free
Ultimate Hemera AnetA8 / AM8 Carriage For LM8LUU With Chain
...e sure to comment! i will see what i can do!
as usual, i have also included the blender file in case you want to edit it further.
thingiverse
free
Hemera + Volcano Ender 3 Cooling Duct by Mapleguy
...ender 3. mounts to the 'front' end of the hemera and uses threaded inserts and screws to mount a 40mm fan. all m3 screws.
thingiverse
free
Universal Hemera Cooling Duct by Celcius1
...designed my own fan duct mounted on the left and have also provided a mirrored version for those that want to mount on the right.
thingiverse
free
BLTouch Adapter for Thorinair's Hemera Spaceship Airduct remix by DanAndersen
...robe_offset { 66, -15, 0.00 }
since the z-height is adjustable at the current setup, you have to align that to your installation.
thingiverse
free
Hemera E3d 4520 fan by fureon
...need :
-1x m3 x 25 mm
-1x m3 x 28 mm
-1x m3 x 6 mm
the tollerance between the bracket and duct are very smal , its a tight fit
thingiverse
free
Ender 2 Cooling Part Duct by samdsx
...rewed to its mount directly like originally.
happy printing and please share your's if you print one :)
if you like it please
thingiverse
free
LED Light CR-10/CR-10s Fan Blower Mount (No Screws Needed) by Dooder_Snickel
...wgcd-solder-position-panel-switch/dp/b06xfxwljp/ref=sr_1_1?ie=utf8&qid=1515286479&sr=8-1&keywords=slide+switch+100+pc
thingiverse
free
SK-GO AF-1 Cooling duct
...n place of the stock 24v cooling fan. you will need two 3m x 20 screws to mount the fan and two 3m x 12 screws to mount the duct.
thingiverse
free
Sovol Sv01 5015 radial part cooling duct by trohn_javolta
...sure the airflow isn't that great but i just printed a bridging test and it turned out quite good.... if that says anything..
Partcooler
thingiverse
free
Partcooling BLV mgn Cube, flow optimized Volcano Hotend
...ight from xylenc4's volcano duct. this "should" hopefully be an imporved partcooling for the volcano hotend on blv.
thingiverse
free
Bondtech DDX Dual Partcooler by MightyBlyatman
... 3 with a micro-swiss hotend.
you may use a drill to enlarge the holes (for m3) so you will be able to screw everything together.
thingiverse
free
E3D V6 Universal Partcooling Fan Mount by Quasto
...rt cooling fan for the e3d.
added more mounting points to have mor options on angel and hight for different partcooling fan ducts
thingiverse
free
Flyingbear Ghost4 Partcooling with LED
... an dc-dc buck to split the hotend cooling power for a 12v led stip with 3 single leds.
when the hotted get hot the led turns on.
thingiverse
free
Ender3 / CR10 "The Orbiter" Mount and Partcooling(Remixed from Petsfang Bullseye) by Prymaxx
... by prymaxx
thingiverse
easy and simple mount your orbiter exdruder to your ender3 or cr10
remixed partcooling from the bullseye
thingiverse
free
Anycubic i3 mega standart partcooler fan duct by dan93
...on the best partcooler but only for the 50x15 blower.
i have the original anycubic i3 mega part cooler fan and i needed a adapter
thingiverse
free
Ultimate Hemera Partcooler bl touch fix by Damicske
...ler bl touch fix by damicske
thingiverse
this is a remix so the bl-touch is sandwiched between the hemera and the part cooler ;)
thingiverse
free
Partcooling BLV mgn Cube, flow optimized Volcano Hotend
...lcano hotend
thingiverse
just extended the fins to the bottom for easyer print. thank you @7effrey for the volcano modification!
thingiverse
free
Ultimate Hemera Partcooler With Spaceship Airduct bl-touch sandwich plate by Damicske
...#39;s room to use the hevorts bl-touch mount (https://www.thingiverse.com/thing:4086282).
added the modified airduct, added 11mm.
thingiverse
free
tevo tarantula simple partcooler by XennoNL
...ptional o-ring. you might need longer m3 bolts.
the part cooler duct is also a press fit 15x20 mm so you can fit your own designs
Airduct
turbosquid
$100
Airduct
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_export
$5
airduct ceiling low poly pbr
... own texture set, just save it from included substance painter project! there is prepared scenes for 3ds max 2018+ . fbx and obj.
3d_export
$5
airduct hanging low poly - pbr
... own texture set, just save it from included substance painter project! there is prepared scenes for 3ds max 2018+ . fbx and obj.
thingiverse
free
K8200 Airduct by kuraasu
...
thingiverse
airduct for 40 mm fan
originally designed for the k8200, but it's probably usable for other printers as well.
thingiverse
free
Connector for airduct for Velleman K8200 by kjaw999
...:262352 to the original support of the k8200. it allows the airduct to rotate up and backwards for better access to the extruder.
thingiverse
free
Anycubic Mega X - Airduct for 5015 by Merk_1337
...duct for 5015 by merk_1337
thingiverse
my design of a airduct for the anycubic mega x with radial 5015 fan.
print with support.
thingiverse
free
K8200 Airduct Remix by brasco901
...duct because it was interfering with my print. i used the mount by mriutort (version 4) https://www.thingiverse.com/thing:455500
thingiverse
free
Airduct holder for K8200 / 3DRAG by microcut
...ing:262352
it is more stiff then holding the fan and nozzle with a thin wire.
adjustable for exact needed height an position.
thingiverse
free
Stronger BMGAQUA AirDuct by Abecia
... is you dont lose any bedspace with this one :)
theres 2 files, 1 has the ducts for the copper tubes 1.5mm longer than the other
thingiverse
free
Hephestos 2 airduct cooler by Turinete
...hestos 2 airduct cooler by turinete
thingiverse
this is a modified design to eliminate the problems with the calibration sensor.
Hemera
3ddd
$1
Hemera
...d
круглое , напольные
зеркало hemera;
designer:grace feyock
dimensions:46 w x 46 h x 1 d
3ddd
$1
Cофа (MOS)
...cофа (mos) 3ddd угловой hemera l-shape sofa. смоделена по реальным...
3d_sky
free
PROFI Hemera
...profi hemera
3dsky
hemera mirror;
designer: grace feyock
dimensions: 46 w x 46 h x 1 d
thingiverse
free
E3D Hemera Model
...e3d hemera model
thingiverse
official mounting cad for designing your own custom mounts for the e3d hemera.
thingiverse
free
Hemera Troodon mount by vonsy
...hemera troodon mount by vonsy
thingiverse
hemera support for troodon
thingiverse
free
BLTouch Mount for Hemera
...bltouch mount for hemera
thingiverse
attach to hemera heat sink body with 3m vhb tape flush to the top edge.
thingiverse
free
X5S MGN12 Hemera by Festivejelly
... mounting solution for the e3d hemera on a mgn12 rail.
assemble and screw the hemera into the mount before putting onto the rail.
thingiverse
free
Hemera Mount for 2020 (2040)
...hemera mount for 2020 (2040)
thingiverse
2020 mount for the e3d hemera (hermes)
thingiverse
free
MGN12 Toprail mount for Hemera
...mgn12 toprail mount for hemera
thingiverse
hemera mount for mgn12 rails on top like the am8
thingiverse
free
E3D Hemera Blower Duct
...e3d hemera blower duct
thingiverse
blower duct & mount. fits e3d hemera extruder
Ultimate
turbosquid
$3
Ultimate Grave
...model ultimate grave for download as blend, obj, stl, and fbx on turbosquid: 3d models for games, architecture, videos. (1636144)
turbosquid
$79
ULTIMATE GIRAFFE
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$5
The Ultimate Bowl
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$1
Ultimate Revolver
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3ddd
$1
Kimera Ultimate DVD System
...kimera ultimate dvd system
3ddd
dvd
schneider kimera ultimate dvd system
cg_studio
$49
The Ultimate Lioness3d model
... model
cgstudio
.max .obj .fbx - the ultimate lioness 3d model, royalty free license available, instant download after purchase.
turbosquid
$5
Ultimate Brick Castle
...yalty free 3d model ultimate brick castle for download as fbx on turbosquid: 3d models for games, architecture, videos. (1335247)
turbosquid
$31
Zombie Ultimate pack
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$8
Barrels Ultimate Pack
...ls ultimate pack for download as ma, max, obj, fbx, and blend on turbosquid: 3d models for games, architecture, videos. (1353281)
turbosquid
$25
Ultimate "F" Bomb
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
Spaceship
3d_export
$5
spaceship
...spaceship
3dexport
this is spaceship
3d_export
$5
spaceship
...spaceship
3dexport
spaceship
3d_export
$5
spaceship
...spaceship
3dexport
spaceship
3d_export
$5
spaceship
...spaceship
3dexport
spaceship
3d_export
$5
spaceship
...spaceship
3dexport
spaceship
3d_export
free
Spaceship
...spaceship
3dexport
spaceship))
3d_export
$5
Spaceship
...spaceship
3dexport
lego spaceship
3d_export
$10
spaceship
...spaceship
3dexport
spaceship 3d model
3d_export
$5
spaceship
...spaceship
3dexport
3d model spaceship
archibase_planet
free
Spaceship
...spaceship
archibase planet
spaceship spacecraft
spaceship n190908 - 3d model (*.3ds) for interior 3d visualization.