Thingiverse
ubq130 by alpinedrones
by Thingiverse
Last crawled date: 3 years, 1 month ago
for the 3" lovers out there
takes common flight controllers, standard fpv camera, motors from 1104 to 1306 or 1407, micro escs (like littlebees, kiss, sn20a, xm20a,...) and 3" props. battery can be mounted on top or on the bottom. recommended vtx is an aomway 200mw (designed for these dimensions) or similar.
have fun :)
be sure to check out the alpinedrones x for the receiver tray:http://www.thingiverse.com/thing:1139099 and some of the UBQ180 200 remixes - for example for a hs1177 mount
takes common flight controllers, standard fpv camera, motors from 1104 to 1306 or 1407, micro escs (like littlebees, kiss, sn20a, xm20a,...) and 3" props. battery can be mounted on top or on the bottom. recommended vtx is an aomway 200mw (designed for these dimensions) or similar.
have fun :)
be sure to check out the alpinedrones x for the receiver tray:http://www.thingiverse.com/thing:1139099 and some of the UBQ180 200 remixes - for example for a hs1177 mount
Similar models
thingiverse
free
XSR and buzzer mount by graemelins
...emix of alpinedrones d4r2 buzzer mount , designed for xsr receiver:http://www.thingiverse.com/thing:1706663
with antennas liners.
thingiverse
free
D4R-II buzzer mount by alpinedrones
...name suggests, a nice way to place your beeper on a miniquad.
30.5x30.5 mounting holes
fits d4r, x4r and several other receivers
thingiverse
free
demonrc NOX5 35&40deg session mount by alpinedrones
...ones
thingiverse
made these very basic session mounts for a friend
other angles might be coming, but i can't promise that...
thingiverse
free
SQ8 to GoPro adapter by alpinedrones
...ap sq8 camera to use it with gopro case mounts.
attention: you have to use a soft material like softpla, ninjaflex, tpu, tpe, ...
thingiverse
free
alpinedrones SQ8 to GoPro adapter remix by lagunacomputer
...rotrusion and usb plug access.
added small tab for top edge.
slimmed down the mounting tabs width
thanks alpinedrones!
sq8 camera
thingiverse
free
Floss 3" Swift Micro Mount by Vindicator1981
...floss 3" swift micro mount by vindicator1981
thingiverse
3" floss cam mount for microswift
thingiverse
free
Hydroponics Wall mount for 3" PVC pipe and 3/4" hose by sh0tybumbati
...4" hose by sh0tybumbati
thingiverse
wall mount for 3" pvc pipes and 3/4" hose for hydroponics/aeroponics set ups.
thingiverse
free
3/4" PVC Pipe Mount by gasda
...3/4" pvc pipe mount by gasda
thingiverse
simple mount for 3/4" pvc pipe
thingiverse
free
3/8" Screw Mount Bracket for StreamDeck XL by Magathery
...2171", so as to mount to an elgato "multi mount" or a 1/4" screw thread via a 1/4" to 3/8" adapter.
thingiverse
free
Hyperbaby 3" Canopy
...tomplate. mounts on 30mm standoffs.
fits 20x20 stacks that don't stick out past the outside edge of the 30.5x30.5 standoffs.
Alpinedrones
thingiverse
free
SQ8 to GoPro adapter by alpinedrones
...ap sq8 camera to use it with gopro case mounts.
attention: you have to use a soft material like softpla, ninjaflex, tpu, tpe, ...
thingiverse
free
alpinedrones SQ8 to GoPro adapter remix by lagunacomputer
...rotrusion and usb plug access.
added small tab for top edge.
slimmed down the mounting tabs width
thanks alpinedrones!
sq8 camera
thingiverse
free
D4R-II buzzer mount by alpinedrones
...name suggests, a nice way to place your beeper on a miniquad.
30.5x30.5 mounting holes
fits d4r, x4r and several other receivers
thingiverse
free
Trasher2 by alpinedrones
...time, however first test flights and experiences made with the original trasher show that it's a really nice and tough frame!
thingiverse
free
miniquad beeper holder (30.5mm hole pattern) by alpinedrones
...mm hole pattern) by alpinedrones
thingiverse
a simple and clean way to attach the beeper securely to the flight controller stack
thingiverse
free
9xr stronger gimbal spring tensioner by alpinedrones
...ent part puts the hook for the spring 2mm further outside. this results in nicer stick feeling imho.
part works for both springs.
thingiverse
free
eken H9 cage by alpinedrones
...erial like soft pla, ninjaflex or tpu. print front facing down.
in my case the cage weighs 25g, so exactly 50% of the stock case.
thingiverse
free
demonrc NOX5 35&40deg session mount by alpinedrones
...ones
thingiverse
made these very basic session mounts for a friend
other angles might be coming, but i can't promise that...
thingiverse
free
X4 Racer micro quadcopter by alpinedrones
...l. it's called racer because it seems to be more stable at higher speeds in forward flight.
i recommend printing it in abs.