Thingiverse
uBitX microphone by scottbaker
by Thingiverse
Last crawled date: 3 years, 3 months ago
This thing is a 3D-printed case for push-to-talk (PTT) microphone for the Bitx40 and uBitx QRP radio kits. These radio kits include an electret microphone element and a pushbutton switch that are used in this build. In addition to theses two items, you will also need to purchase one 3.5mm stereo jack**, four M3x10mm screws. This project requires wiring and soldering to connect the microphone, jack and PTT switch. Refer to the provided wiring diagram.
** Note: Stereo jacks come in all shapes and sizes. The stereo jack used here has a 6mm diameter threaded section and an 8mm diameter main section. You will need to find one that meets these specs in order for it to fit into the case.
** Note: Stereo jacks come in all shapes and sizes. The stereo jack used here has a 6mm diameter threaded section and an 8mm diameter main section. You will need to find one that meets these specs in order for it to fit into the case.
Similar models
thingiverse
free
QRP microphone by scottbaker
...
this project requires wiring and soldering to connect the microphone, jack and ptt switch. refer to the provided wiring diagram.
thingiverse
free
uBITX Mini Microphone by AngelDMercedes
... the wires of the microphone if pulled. best of luck and 73.
assembly and test video:https://www.youtube.com/watch?v=ueamhlminpo
thingiverse
free
Morse Key by scottbaker
... section and an 8mm diameter main section. you will need to find one that meets these specs in order for it to fit into the case.
thingiverse
free
Hand mic for uBitx radio kit by loughkb
...an offset button. put a bit of foam in the microphone pocket so the element will be pressed into it to prevent vibration noise.
thingiverse
free
PTT Switch Case by tdeagan
...ptt switch case by tdeagan
thingiverse
this is a hand-mounted case for a ham radio ptt swtich.
thingiverse
free
uBITX Desk Microphone by DU2RK
... the opposite side with the bump to form the grille. you can then slide the formed grille into the open end of the mic enclosure.
thingiverse
free
Homemade Radio Microphone Shell by matrhint
...homemade radio microphone shell by matrhint
thingiverse
this is a design for a ptt microphone.
thingiverse
free
uBITX Case by grajohnt
....5mm trs jack very close to the microphone, and use a 3.5mm m-m shielded cable to connect to the ubitx
connect up, and make qsos!
thingiverse
free
Case for Baofeng UV-5R by Cantankerous
...t get pressed during airsoft while its in the radio pouch and still being able to use the ptt wire plugged in, this is a snug fit
thingiverse
free
uBitX Single Lever Morse Code Paddle by AngelDMercedes
...ion cable (with two 3.5mm jacks) or any other cable with one 3.5mm audio jack.
build and test video:https://youtu.be/opoirwk1lkg
Scottbaker
thingiverse
free
Pixie Case by scottbaker
...pixie case by scottbaker
thingiverse
yet another case for the pixie 40 meter qrp cw amateur radio transceiver.
thingiverse
free
LC100A Case by scottbaker
...ottbaker
thingiverse
case for an lc100-a digital inductance and capacitance l/c meter.
i used 4 m3x8mm screws to connect the top
thingiverse
free
QRP microphone by scottbaker
...
this project requires wiring and soldering to connect the microphone, jack and ptt switch. refer to the provided wiring diagram.
thingiverse
free
Case for Morse Code Trainer/Decoder by scottbaker
....stl will require 4x of these to complete the case
four 16mm m3 screw are required to attach the bezel to the base (with spacers)
thingiverse
free
Morse Key by scottbaker
... section and an 8mm diameter main section. you will need to find one that meets these specs in order for it to fit into the case.
thingiverse
free
QCX Kit Radio Case by scottbaker
... compensate for the different component heights.
note2: i printed this in pla, but you might also consider petg or abs filament.
thingiverse
free
uSDX Tri-Band HF Radio Case by scottbaker
... but will
need to be glued so they stay in place.
note7: i printed this in pla, but you might also consider petg or abs filament.
Ubitx
thingiverse
free
uBITX Enclosure KE0KHA by mrdav1e
...verse
i designed this enclosure with help from w0jmp and various other hams from the ubitx and bitx40 facebook group. have fun!
thingiverse
free
uBitX Speaker Enclosure by maiello00
...inch 8 ohm speaker for use with the ubitx transceiver. it includes a strain relief to support the cable connected to the speaker.
thingiverse
free
Protective front cover for uBitx case by DU2RK
...se by du2rk
thingiverse
protective front cover for the awesome ubitx case made by du2rkhttps://www.thingiverse.com/thing:2925336
thingiverse
free
Ubitx face plate by Tonydorg
... extra fine with 40% infill.
i will post updates .
if you want me to make a custom face plate with your call just let me know. 73
thingiverse
free
JHD 162A Border (for uBitx) by insomnike
...t. this is great if your cuts into your case, or drill holes, aren't great and you'd like a surround to help cover it up.
thingiverse
free
uBITX Ruggedized Large Enclosure KE0KHA by mrdav1e
...takes a long time to print. this large enclosure is designed with only the led cutout so you can modify your ubitx. 73! ke0kha
thingiverse
free
40mm uBitx Fan Guard by eckie63
...our fan has one, and depending on how you turn yours for airflow. this one covers the label on all the fans i have laying around.
thingiverse
free
Back of uBitx case with anderson power pole thru-hole by loughkb
...updated back for the ubitx case with anderson power poles for power connector. the power poles will snap into the provided hole.
thingiverse
free
uBITX microphone by N8KLX
...d spst pushbutton switch. it is held together with m3 x 8mm socket head screws. i printed it with 0.2mm slicing and 60% infill.
thingiverse
free
uBITX Ruggedized Hanger Enclosure KE0KHA by mrdav1e
...s underneath. the walls are 4mm thick and the case comes with standoffs to secure the pcb to the enclosure along with the rails.
Microphone
3ddd
$1
microphone
...microphone
3ddd
microphone , микрофон
microphone
3d_ocean
$7
Microphone
...microphone
3docean
mic microphone mike
microphone
3d_ocean
$4
Microphone
...microphone
3docean
mic microphone mike
microphone with spherical grill
archibase_planet
free
Microphone
...hone conference microphone
digital conference selector microphone n170912 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
3d_export
$7
microphone
...microphone
3dexport
black microphone
3d_export
$5
microphone
...microphone
3dexport
black modern microphone for streaming
archibase_planet
free
Microphone
...microphone
archibase planet
microphone audio equipment
microphone n260809 - 3d model (*.3ds) for interior 3d visualization.
archibase_planet
free
Microphone
...microphone
archibase planet
equipment microphone
microphone n230410 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Microphone
...microphone
archibase planet
microphone audio equipment
microphone n250608 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Microphone
...microphone
archibase planet
microphone audio equipment
microphone n160309 - 3d model (*.gsm+*.3ds) for interior 3d visualization.