TYT Transceiver TH9800 and TH7800 desktop stand, feet, brackets by Grouty

Last crawled date: 2 years, 10 months ago

This allows your quad band or dual band amateur radio TYT transceiver to firmly stand on a desktop raising the front approx. 20 degrees and allowing air to access the underneath heatsink and help cool the radio when transmitting.
I developed this a the mobile bracket held the transceivers too high.
Suits the TH 9800 and TH 7800 mobile radios and has recess and designed with a curve shape that follows the transceivers shape and avoids other chassis screws.
Can be used with the screws that came with your mobile bracket although they are only just long enough, I used 12mm M4 screws.
Print with outside face on the bed, I used a brim for adhesion and very slow speed for the initial layers.
Layer height 0.2
Wall thickness 1.2
Infill density 20%
retraction on
Build plate adhesion = Brim
PLA (Anycubic)
Printed on Anycubic IMega S