Two color (separate printing) spinner by bda

Last crawled date: 3 years ago

Print the side and center of the spinner in different colors.
One side of the central part needs to be slightly treated with a sand paper.
And just put them together.
They keep firmly on the bearings even without glue. But you can add a drop of glue.
In scad and stl hole for bearing 22.1mm for snug fit (i am using cura and nozlle 0.3mm).
for spinner caps i am used Ultimate Spinner Button Cap Low Profile Rounded
by silyavski,http://www.thingiverse.com/thing:2136665
scaled 104.5% for good fit and printed with support, cap up.