Twisted 6-sided Vase Basic on a tray by Jaspermaster

Last crawled date: 3 years, 1 month ago

The vases were uploaded by: MaakMijnIdee (https://www.thingiverse.com/thing:18672)
I scaled the original design and printed it 3 times (one 100mm tall, one 125mm tall and one 150mm tall.)
Then I designed a tray to put them on.
Finally put some stones in it (for the weight) and some fake flowers.
Timelapse of printing the small vase: https://www.youtube.com/watch?v=wnnvH9SvOjw
Print settings vase (all three):
Spiral vase mode
Bottom layers: 4
Top layers: 4
Wall thickness: 1 layer (0.4mm in my case)
Temperature extruder: 195°C
Bed type: 3mm glass
Temperature bed: 60°C
Infill: -
Material: PLA (black)
Layer height: 0.2mm
Adhesion: none
Support: none
Software: Cura 3.4.1
Print speed: 45mm/s
Settings for the tray:
Temperature extruder: 200°C
Bed type: 3mm glass
Temperature bed: 65°C
Infill: -
Material: PLA (black)
Layer height: 0.2mm
Adhesion: none
Support: Yes
Software: Cura 3.4.1
Print speed: 45mm/s