TTn42 / QR120 QR ALY Wagon

Last crawled date: 4 years, 3 months ago

For:
1:120, TT Scale on N / 9mm track.
What it is:
A low detail 4 wheel wagon (Not up to the quality of a modern ready to run models, this is a kit!)
Additional Parts Needed:
4 x 1mm "Top Hat" Bearings - N Gauge Brass Bearing Cups / Pin-Point Brass Bearings, Shouldered Type DP09 (Got my last lot from https://dundasmodels.co.uk/)
1mm Drill to gently clean out the axle holes
7mm 009 wheels solid disc on a 15mm axle Dundas DW64 (Had to be spread a little to meet the NMRA standard)
0.5mm brass wire
Micro Trains MT1015 Couplers
Notes:
Use a 0.3mm Nozzle for better detail and 0.1 or 0.08mm layering
Download roof, side and end walls from the original Sn42 version, these need to be reduced to 53.3% in your slicer program.
Print the TTn42 floor and side frames with support at 100%
Lightly sand glue contact surfaces
Use a Gap Filling Super Glue (Zap a Gap)
The final product will depend on the quality of the printer and how you have your settings under control
Supplied as is, no support and no promises